journal article·2019-10

Characterisation of steel/nickel bronze clad strips prepared by continuous solid/liquid bonding method

Jinchuan Jie, Chengbin Liu, Shihang Wang, Bowen Dong, Shichao Liu, Tingju Li

Materials Science and Technology· Volume 35· Issue 15
Publisher page

Abstract

A continuous solid/liquid bonding method was successfully developed to fabricate Cu–10wt-%Ni–1wt-%Fe (nickel bronze) clad steel with a good metallurgical bonding in the present study. The results indicated that the diffusion distance of interface is about 1.90–2.18 µm. The average tensile shear strength of centre composite strip at as-cast state is 228 ± 5 MPa, while that of edge is 202 ± 6 MPa, and the interface strength is higher than that of bronze since the fracture always occurs on the nickel bronze side. After the rolling process, the tensile shear strength increases with the increasing rolling reduction. The reason can be ascribed to the strengthening of the nickel bronze whose strength is still lower than the interface.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metallurgy and Material Science · Aluminum Alloys Composites Properties · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Key Laboratory of Solidification Control and Digital Preparation Technology (Liaoning Province), School of Material Science and Engineering, Dalian University of Technology, Dalian, People's Republic of China

Funding

Key Technologies Research and Development Program · Natural Science Foundation of China · Fundamental Research Funds for the Central Universities of China · National Key Research and Development Program of China

References (32)

Show source-provided references
1. 10.1016/j.scriptamat.2011.01.01310.1016/j.scriptamat.2011.01.013 ↗
2. DavisJR, , Handbook Vol ASM. 02 properties and selection: nonferrous alloys and special-purpose materials 2. Ohio: ASM International; 1990.
3. 10.1016/j.scriptamat.2012.04.01510.1016/j.scriptamat.2012.04.015 ↗
4. 10.1016/j.scriptamat.2012.05.04010.1016/j.scriptamat.2012.05.040 ↗
5. 10.1179/00070598279827422810.1179/000705982798274228 ↗
6. 10.1016/j.matdes.2009.06.00310.1016/j.matdes.2009.06.003 ↗
7. 10.1016/S0921-5093(00)01273-910.1016/S0921-5093(00)01273-9 ↗
8. 10.1016/j.matdes.2012.09.03710.1016/j.matdes.2012.09.037 ↗
9. 10.1016/j.matdes.2004.07.02110.1016/j.matdes.2004.07.021 ↗
10. 10.1016/j.msea.2018.06.05110.1016/j.msea.2018.06.051 ↗
11. 10.1016/j.jmapro.2017.09.00910.1016/j.jmapro.2017.09.009 ↗
12. 10.1007/s00170-016-8488-510.1007/s00170-016-8488-5 ↗
13. 10.1016/j.scriptamat.2009.06.01410.1016/j.scriptamat.2009.06.014 ↗
14. 10.1080/10426914.2010.54481710.1080/10426914.2010.544817 ↗
15. 10.1080/10426914.2011.55196010.1080/10426914.2011.551960 ↗
16. 10.1080/00202967.2004.1187157410.1080/00202967.2004.11871574 ↗
17. 10.1016/j.matdes.2017.01.04210.1016/j.matdes.2017.01.042 ↗
18. Mishra SRMA, Friction stir welding and processing. Mater Sci Eng R. 2010;50(1):1–78.
19. 10.1016/j.phpro.2011.03.01810.1016/j.phpro.2011.03.018 ↗
20. 10.1016/j.jallcom.2018.07.05810.1016/j.jallcom.2018.07.058 ↗
21. Pan D, , Gao K, , Yu J. Cold roll bonding of bimetallic sheets and strips. Met Sci J. 1989;5(9):934–939.
22. Szekdy J. Fluid flow phenomena in metal processing. New York: Academic Press; 1979.
23. 10.1016/j.jnucmat.2007.03.25610.1016/j.jnucmat.2007.03.256 ↗
24. 10.1049/el:1999066310.1049/el:19990663 ↗
25. 10.1063/1.156532310.1063/1.1565323 ↗
26. 10.1016/0001-6160(54)90087-510.1016/0001-6160(54)90087-5 ↗
27. 10.1557/JMR.2005.024410.1557/JMR.2005.0244 ↗
28. 10.1016/j.jmatprotec.2015.03.00310.1016/j.jmatprotec.2015.03.003 ↗
29. 10.1016/j.matdes.2015.07.08210.1016/j.matdes.2015.07.082 ↗
30. 10.1016/j.msea.2011.08.06110.1016/j.msea.2011.08.061 ↗
31. 10.1007/BF0115458310.1007/BF01154583 ↗
32. 10.1126/science.257.5072.89710.1126/science.257.5072.897 ↗