journal article·2019-11

Time-evolution of microstructure and mechanical behaviour of double annealed medium Mn steel

Artem Arlazarov, Mohamed Goune, Olivier Bouaziz, Frédéric Kegel, Alain Hazotte

Materials Science and Technology· Volume 35· Issue 17
Publisher page

Abstract

Cold rolled 0.1C-4.7Mn (wt-%) steel was submitted to double annealing. The holding time of second intercritical annealing at 650°C was varied between 3 min and 30 h. Tensile behavior after each treatment was measured and analysed. Microstructure characterisation was performed using field emission gun scanning electron microscope, transmission electron microscope and saturation magnetisation method. Moreover, interrupted tensile tests were done to obtain the kinetics of austenite destabilisation during straining. An important effect of soaking time on the microstructure and associate mechanical properties was revealed and analysed. Considering thermal and mechanical stability of retained austenite, the optimum combination of phases, providing the best strength-ductility balance, was found after 2 h holding. This paper is part of a Thematic Issue on Medium Manganese Steels.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Magnetic Properties and Applications · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

ArcelorMittal Mazières Research, Voie Romaine, Maizières-lès-Metz, France

Institut de Chimie de la Matière Condensée de Bordeaux (ICMCB), Pessac, France

Laboratoire d'Etude des Microstructures et de Mécanique des Matériaux (LEM3), Université de Lorraine, Metz, France

References (21)

Show source-provided references
1. Merwin MJ. Microstructure and properties of cold rolled and annealed low-carbon manganese TRIP steels, Proceedings of AIST Steel Properties & Applications Conference, Detroit, 2007; p.67-84.10.4271/2007-01-0336 ↗
2. 10.1016/j.scriptamat.2010.06.02310.1016/j.scriptamat.2010.06.023 ↗
3. 10.1007/s11661-011-0636-910.1007/s11661-011-0636-9 ↗
4. Cao W, Shi J, Wang C, Work hardening behavior of ultrafine grained duplex medium-Mn steels annealed by ART, Proceedings of HMnS 2011 Conference, Korea, 2011.
5. 10.1016/j.scriptamat.2016.07.01310.1016/j.scriptamat.2016.07.013 ↗
6. 10.1016/j.scriptamat.2010.12.01210.1016/j.scriptamat.2010.12.012 ↗
7. 10.1016/j.msea.2012.02.02410.1016/j.msea.2012.02.024 ↗
8. 10.1016/j.actamat.2012.10.01910.1016/j.actamat.2012.10.019 ↗
9. 10.1179/1743284713Y.000000041610.1179/1743284713Y.0000000416 ↗
10. Arlazarov A, Gouné M, Hazotte A, Mechanism of ultra-fine microstructure formation during ART-annealing of a Medium-Mn steel, Proceedings of PTM2015 conference, Vancouver, 2015.
11. 10.1080/09500839.2017.129029310.1080/09500839.2017.1290293 ↗
12. 10.1016/j.msea.2014.03.12010.1016/j.msea.2014.03.120 ↗
13. 10.1016/j.actamat.2017.07.05610.1016/j.actamat.2017.07.056 ↗
14. 10.1016/j.msea.2011.05.03910.1016/j.msea.2011.05.039 ↗
15. 10.1016/j.msea.2016.07.05410.1016/j.msea.2016.07.054 ↗
16. 10.1007/s11661-013-1648-410.1007/s11661-013-1648-4 ↗
17. 10.2355/isijinternational.53.107610.2355/isijinternational.53.1076 ↗
18. 10.4028/www.scientific.net/MSF.706-709.269310.4028/www.scientific.net/MSF.706-709.2693 ↗
19. Arlazarov A. Evolution of microstructure and mechanical properties of medium Mn steels and their relationship [dissertation]. Université de Lorraine; 2015.
20. 10.1007/BF0264368610.1007/BF02643686 ↗
21. 10.1179/mst.1994.10.7.62110.1179/mst.1994.10.7.621 ↗