journal article·2018-06

Properties of ultrafine-grained Mg-based composites modified by addition of silver and hydroxyapatite

Kamil Kowalski, Mieczyslawa U. Jurczyk, Przemyslaw K. Wirstlein, Jaroslaw Jakubowicz, Mieczyslaw Jurczyk

Materials Science and Technology· Volume 34· Issue 9
Publisher page

Abstract

In this study, hydroxyapatite and silver were added to Mg–1Zn–1Mn–0.3Zr alloy to fabricate ultrafine-grained metal matrix composites. Grain sizes of approximately 85 nm were recorded by atomic force microscopy for the Mg–1Zn–1Mn–0.3Zr–5 wt-% HA–1 wt-% Ag composite. The contact angles in water and simulated body fluid on the ultrafine-grained Mg–1Zn–1Mn–0.3Zr-based composites were determined. Following a hydrofluoric acid treatment, the surface wettability changed from hydrophilicity to hydrophobicity. The electrochemical test showed that the corrosion resistance of the fluoride-treated specimens was higher, when compared with the untreated samples. The Mg–1Zn–1Mn–0.3Zr–5 wt-% HA and Mg–1Zn–1Mn–0.3Zr–5 wt-% of HA–1 wt-% Ag composites modified with MgF 2 have a higher degree of biocompatibility, which makes them potential candidates for medical applications
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Faculty of Mechanical Engineering and Management, Institute of Materials Science and Engineering, Poznan University of Technology, Poznan, Poland

Division of Mother's and Child's Health, Poznan University of Medical Sciences, Poznan, Poland

Department of Gynaecology and Obstetrics, Division of Reproduction, Poznan University of Medical Sciences, Poznan, Poland

Funding

Narodowe Centrum Nauki, National Science Centre Poland

References (31)

Show source-provided references
1. 10.1002/adem.20060025210.1002/adem.200600252 ↗
2. 10.1016/j.mser.2014.01.00110.1016/j.mser.2014.01.001 ↗
3. 10.1016/j.biomaterials.2004.09.04910.1016/j.biomaterials.2004.09.049 ↗
4. 10.1016/j.biomaterials.2005.07.03710.1016/j.biomaterials.2005.07.037 ↗
5. 10.1016/j.msec.2011.07.01510.1016/j.msec.2011.07.015 ↗
6. 10.3390/ma501013510.3390/ma5010135 ↗
7. Avedesian MM · 1999
8. 10.1002/jbm.a.3127310.1002/jbm.a.31273 ↗
9. 10.1016/S1471-5317(02)00008-110.1016/S1471-5317(02)00008-1 ↗
10. 10.1088/1468-6996/16/5/05350110.1088/1468-6996/16/5/053501 ↗
11. 10.1016/j.msec.2012.08.03610.1016/j.msec.2012.08.036 ↗
12. 10.1002/jbm.a.3210710.1002/jbm.a.32107 ↗
13. 10.1016/j.actbio.2014.09.02610.1016/j.actbio.2014.09.026 ↗
14. 10.1016/j.scriptamat.2009.03.06110.1016/j.scriptamat.2009.03.061 ↗
15. 10.1016/j.actbio.2009.12.02010.1016/j.actbio.2009.12.020 ↗
16. 10.1016/j.matchemphys.2010.03.07610.1016/j.matchemphys.2010.03.076 ↗
17. 10.1016/j.biomaterials.2006.12.02710.1016/j.biomaterials.2006.12.027 ↗
18. 10.1007/s11665-016-2306-y10.1007/s11665-016-2306-y ↗
19. Kowalski K · Metal Forming · 2016 · 27 · 195
20. 10.1016/S1003-6326(08)60102-810.1016/S1003-6326(08)60102-8 ↗
21. 10.1016/j.msec.2008.06.02810.1016/j.msec.2008.06.028 ↗
22. 10.1016/j.jallcom.2011.04.11210.1016/j.jallcom.2011.04.112 ↗
23. 10.1002/adem.20050020210.1002/adem.200500202 ↗
24. 10.1016/j.mseb.2017.02.01010.1016/j.mseb.2017.02.010 ↗
25. 10.1515/amm-2016-023510.1515/amm-2016-0235 ↗
26. 10.1016/j.corsci.2016.08.01310.1016/j.corsci.2016.08.013 ↗
27. 10.1016/j.ceramint.2014.05.08810.1016/j.ceramint.2014.05.088 ↗
28. 10.1023/A:101283642686610.1023/A:1012836426866 ↗
29. 10.1128/AAC.46.6.1940-1945.200210.1128/AAC.46.6.1940-1945.2002 ↗
30. 10.22203/eCM.v025a2010.22203/eCM.v025a20 ↗
31. 10.1016/S1003-6326(16)64096-710.1016/S1003-6326(16)64096-7 ↗