journal article·2016-11

Effect of Nb-Mo additions on precipitation behaviour in V microalloyed TRIP-assisted steels

E. Abbasi, W. M. Rainforth

Materials Science and Technology· Volume 32· Issue 16
Publisher page

Abstract

The microstructural evolution and precipitation behaviour of Nb-V-Mo and single V containing transformation-induced plasticity-assisted steels with an acicular/bainitic ferrite matrix were investigated by a heat treatment up to the austenite formation range. It was found that during the heating stage the acicular/bainitic ferrite matrix resisted recrystallisation, while cementite and martensite were decomposed and austenite was formed in the acicular/bainitic ferrite. Both Nb-V-Mo and V containing steels after the heat treatment showed a microstructure consisting of a polygonal ferrite matrix with small islands of pearlite. During these transformations, the microscopy observations showed that 0.04 wt% Nb and 0.08 wt% Mo additions to the 0.16 wt% V microalloyed steel considerably reduced the growth-coarsening of microalloy precipitates.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Materials Science and Engineering, The University of Sheffield, Sir Robert Hadfield Building, Mappin Street, Sheffield S1 3JD, UK

References (36)

Show source-provided references
1. Ikeda S., Akamizu H., Makii K., Mukai Y., and Sugimoto K. ‘High strength and low yield ratio cold rolled steel sheet and method of manufacturing the same’, Japan Patent US7591977 B2, 22 September 2009.
2. 10.1016/j.cossms.2004.10.00210.1016/j.cossms.2004.10.002 ↗
3. 10.2355/isijinternational.51.172410.2355/isijinternational.51.1724 ↗
4. Allain S., Couturier A., Lung Th., and Colin Ch. ‘Process for manufacturing steel sheet having very high strength, ductility and toughness characteristics, and sheet thus produced’, USA Patent US2009/0107588 A1, 30 April 2009.
5. Gladman T. · 2002
6. 10.1179/1743284714Y.000000053610.1179/1743284714Y.0000000536 ↗
7. 10.1179/03063458079042633710.1179/030634580790426337 ↗
8. 10.1179/174328409X45325310.1179/174328409X453253 ↗
9. Abbasi E. · PhD thesis · 2015
10. 10.1016/j.msea.2012.01.01210.1016/j.msea.2012.01.012 ↗
11. 10.1016/j.actamat.2015.06.05710.1016/j.actamat.2015.06.057 ↗
12. 10.1007/s11661-003-0303-x10.1007/s11661-003-0303-x ↗
13. 10.1016/S1359-6454(01)00389-510.1016/S1359-6454(01)00389-5 ↗
14. Bhadeshia H. K. D. H. · 2003
15. 10.1179/1743284712Y.000000015710.1179/1743284712Y.0000000157 ↗
16. 10.2355/isijinternational.44.74410.2355/isijinternational.44.744 ↗
17. 10.1179/026708309X1250693387326010.1179/026708309X12506933873260 ↗
18. 10.1016/j.msea.2008.05.05910.1016/j.msea.2008.05.059 ↗
19. Pickering F. B. ‘The structure and properties of bainite in steels’, Proc. Symp. ‘Transformation and hardenability in steels’, Michigan, USA, February 1967, Climax Molybdenum, 109–132.
20. 10.1016/j.msea.2013.09.02610.1016/j.msea.2013.09.026 ↗
21. Abbaschian R. · 2009
22. 10.1016/B978-008044164-1/50008-610.1016/B978-008044164-1/50008-6 ↗
23. 10.1016/S1359-6454(02)00260-410.1016/S1359-6454(02)00260-4 ↗
24. 10.1179/026708309X1252655549335010.1179/026708309X12526555493350 ↗
25. 10.1179/03063458279042730710.1179/030634582790427307 ↗
26. 10.1016/j.actamat.2004.04.02710.1016/j.actamat.2004.04.027 ↗
27. Baker R. G., and Nutting J. ‘The tempering of a Cr-Mo-V-W steel and a Mo-V steel’, ‘Precipitation Processes in Steels’, 1959, Sheffield, The Iron and Steel Institute, 1–22.
28. 10.1179/02670830322500597110.1179/026708303225005971 ↗
29. 10.1016/j.msea.2003.10.28010.1016/j.msea.2003.10.280 ↗
30. Morrison W. B. · J. Iron Steel Inst. · 1963 · 201 · 317
31. Zajac S. · Strengthening mechanisms in vanadium microalloyed steels intended for long products · 1998 · 38 · 1130
32. 10.1179/1743284712Y.000000013110.1179/1743284712Y.0000000131 ↗
33. Sun X., and Yong Q. ‘The roles and applications of molybdenum element in low alloy steels’, Proc. Int. Semin. ‘Application of Mo in steels’, Beijing, China, June 2010, Beijing antaike information development, 61–73.
34. 10.1016/j.scriptamat.2012.09.02710.1016/j.scriptamat.2012.09.027 ↗
35. 10.1179/1743281214Y.000000019110.1179/1743281214Y.0000000191 ↗
36. 10.1016/j.actamat.2014.10.01010.1016/j.actamat.2014.10.010 ↗