Model for predicting ductile fracture of SA508-3 steel undergoing hot forming
Source abstract
Abstract
On the basis of the tensile tests that were conducted on a Gleeble thermomechanical simulator at various temperatures and strain rates, the fracture behaviour of SA508-3 steel was investigated, and a model for predicting the occurrence of ductile fracture during hot deformation was established. In order to determine the critical fracture strain ϵf that initiates the necking of the material, a ‘virtual’ part of the specimen was created according to the constant volume condition to replace the necking volume of the specimen. Experimental results indicated that ϵf depends on temperature and strain rate, and subsequently, a model of ϵf was established. In conjunction with Oyane's fracture criterion, an evaluation method for predicting the fracture of SA508-3 during hot forming was reproduced. The model was verified by upsetting tests, and good coincidence was obtained. As an application, it was applied to a simulation of a forging stretching process, and the calculated results showed the model has preferable predication performance.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metallurgy and Material Forming · Metal Forming Simulation Techniques · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
National Engineering Research Center for Die and Mold CAD School of Materials Science and Engineering, Shanghai Jiao Tong University, Shanghai 200030, China
Department of Mechanical Engineering Kumamoto University, Kumamoto, Japan
References (29)
Show source-provided references
1. 10.1016/0013-7944(85)90052-910.1016/0013-7944(85)90052-9 ↗
2. 10.1007/BF0113916410.1007/BF01139164 ↗
3. 10.1016/j.engfracmech.2004.04.01210.1016/j.engfracmech.2004.04.012 ↗
4. 10.1016/j.ijplas.2009.03.00610.1016/j.ijplas.2009.03.006 ↗
5. 10.1016/j.ijplas.2007.12.00110.1016/j.ijplas.2007.12.001 ↗
6. Cockcroft MG · J. Inst. Met. · 1968 · 96 · 33
7. 10.1016/j.jmatprotec.2006.11.07110.1016/j.jmatprotec.2006.11.071 ↗
8. 10.1115/1.343947110.1115/1.3439471 ↗
9. 10.1016/j.ijmecsci.2012.06.00910.1016/j.ijmecsci.2012.06.009 ↗
10. 10.1016/j.ijplas.2012.01.00310.1016/j.ijplas.2012.01.003 ↗
11. 10.1115/1.360120410.1115/1.3601204 ↗
12. 10.1016/0022-5096(69)90033-710.1016/0022-5096(69)90033-7 ↗
13. 10.1299/jsme1958.15.150710.1299/jsme1958.15.1507 ↗
14. 10.1016/S0020-7403(02)00045-010.1016/S0020-7403(02)00045-0 ↗
15. 10.1007/s11661-010-0235-110.1007/s11661-010-0235-1 ↗
16. 10.1016/j.msea.2003.08.02710.1016/j.msea.2003.08.027 ↗
17. Wang X · Int. J. Impact Eng. · 2013
18. 10.1016/j.ijmecsci.2005.03.00310.1016/j.ijmecsci.2005.03.003 ↗
19. 10.1016/S0890-6955(01)00149-310.1016/S0890-6955(01)00149-3 ↗
20. 10.1016/j.jmatprotec.2004.06.02910.1016/j.jmatprotec.2004.06.029 ↗
21. 10.1016/S1003-6326(08)60263-010.1016/S1003-6326(08)60263-0 ↗
22. 10.1007/978-1-4615-8696-8_1710.1007/978-1-4615-8696-8_17 ↗
23. Xu ZJ · Acta Metall. Sinica · 42 · 965
24. 10.1007/BF0115149810.1007/BF01151498 ↗
25. 10.1016/0036-9748(80)90182-910.1016/0036-9748(80)90182-9 ↗
26. 10.1016/0001-6160(66)90207-010.1016/0001-6160(66)90207-0 ↗
27. 10.1016/S0924-0136(99)00449-510.1016/S0924-0136(99)00449-5 ↗
28. 10.1243/095440605X1682010.1243/095440605X16820 ↗
29. 10.1016/0378-3804(80)90006-610.1016/0378-3804(80)90006-6 ↗