Effect of carbon and phosphorus addition on sintered density and effect of carbon removal on mechanical properties of high density sintered steel
Source abstract
Abstract
This paper provides data on the effect of carbon and phosphorus levels on the density of liquid phase sintered steel and the impact of subsequent carbon removal on the mechanical properties. After sintering die pressed samples composed of liquid forming additives and coarse water atomised powder at 1250°C or below, followed by postsintering decarburisation, densities of >95% relative density and non-brittle microstructures are achieved. Tensile testing shows the important effect of the microstructure on the mechanical properties. Ductility is improved by the post-sintering decarburisation, corresponding to elongation to fracture of 12% for certain compositions. Apparent diffusion coefficients for carbon were also estimated.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Powder Metallurgy Techniques and Materials · Advanced materials and composites · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Materials Science and Engineering Chalmers University of Technology, SE – 41296,Go¨teborg, Sweden
References (10)
Show source-provided references
1. JAMES B. A.: Powder Metall. 1985 28 (3) 121–130.10.1179/pom.1985.28.3.121 ↗
2. LINDBERG C.: Proc. Conf. on ‘Advances in powder metallurgy and particulate materials’ Vol. 3 99-106; 1992 Princeton NJ Metal Powder Industries Federation.
3. 10.1016/S0927-0256(00)00124-510.1016/S0927-0256(00)00124-5 ↗
4. MOLINARI A. STRAFFELINI G. FONTANARI V. and CANTERI R.: Powder Metall. 1992 35 (4) 285.10.1179/pom.1992.35.4.285 ↗
5. KHRAISAT W. NYBORG L. YI D. and YU Y.: Proc. Int. Conf. Koyoto 2000 Koyoto Japan November 2000 (ed. Kosuge K. and Nagai H.) Vol. 1 709-712; 2000 JPMA.
6. KHRAISAT W. and NYBORG L.: Powder Metall. 2003 46 265–270.10.1179/003258903225008535 ↗
7. 10.1179/imr.1977.22.1.26210.1179/imr.1977.22.1.262 ↗
8. DARKEN L. and GURRY R.: ‘Physical chemistry of metals’ 447; 1953 New York McGraw-Hill.
9. BRANDES A. and BROOK G. B.: ‘Smithells metals reference book’ 7th edn; 1992 Oxford Butterworth-Heinemann.
10. GALLO A., , ELIA A., and CIAMBELLINI S.: Powder Metall. mt., 1984, 16, (4), 177–179.