journal article·2023-09

Optimization of wood machining parameters using artificial neural network in CNC router

Ali Cakmak, Abdulkadir Malkocoglu, Sukru Ozsahin

Materials Science and Technology· Volume 39· Issue 14
Publisher page

Abstract

This study aims to determine the optimal CNC (Computer Numerical Control) machining conditions using an artificial neural network. For this purpose, Fagus orientalis, Castanea sativa, Pinus sylvestris, and Picea orientalis wood samples at 8%, 12%, and 15% moisture content (MC) were machined on a CNC router in both across and along the grain directions. Based on the experimental data of surface roughness and cutting power analyses, a total of 16 models were used. These were selected in hundreds of models that have the lowest error. The spindle speed, feed rate, and the number of cutter teeth were chosen to be different with the literature based on the length of cutter mark. As a result, optimum machining parameters were determined for each wood MC.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced machining processes and optimization · Advanced Machining and Optimization Techniques · Wood Treatment and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Faculty of Forestry, Department of Forest Industry Engineering, Karadeniz Technical University, Trabzon, Turkey

Faculty of Forestry, Department of Industry Engineering, Karadeniz Technical University, Trabzon, Turkey

Funding

T?rkiye Bilimsel ve Teknolojik Arastirma Kurumu

References (55)

Show source-provided references
1. 10.1016/j.jmatprotec.2005.09.03110.1016/j.jmatprotec.2005.09.031 ↗
2. 10.15376/biores.16.3.5133-514710.15376/biores.16.3.5133-5147 ↗
3. 10.1177/1687814021101763210.1177/16878140211017632 ↗
4. 10.1002/978111860271310.1002/9781118602713 ↗
5. 10.1007/978-3-642-29955-110.1007/978-3-642-29955-1 ↗
6. Hazir E · Maderas Ciencia Tecnol · 2019 · 21 · 493
7. Binali R · Measurement (Mahwah N J) · 2022 · 201 · 1
8. 10.1007/s00107010024310.1007/s001070100243 ↗
9. Cristóvão L. · 2013
10. 10.15376/biores.6.4.3687-371310.15376/biores.6.4.3687-3713 ↗
11. Kumar K, Ranjan C, Davim JP. Non-conventional machining. CNC programming for machining. Materials forming, machining and tribology. Cham: Springer; 2020. p. 73–87.10.1007/978-3-030-41279-1_8 ↗
12. 10.15376/biores.10.4.6797-680810.15376/biores.10.4.6797-6808 ↗
13. Cakmak A. · 2021
14. 10.1016/S0169-2070(97)00044-710.1016/S0169-2070(97)00044-7 ↗
15. 10.1007/s00107-017-1219-210.1007/s00107-017-1219-2 ↗
16. Savkovic B · Adv Prod Eng Manage · 2020 · 15 · 137
17. 10.17475/kastorman.66269910.17475/kastorman.662699 ↗
18. 10.1007/s00107-016-1050-110.1007/s00107-016-1050-1 ↗
19. Gurgen A · Maderas Ciencia Tecnol · 2022 · 24 · 1
20. 10.1007/s10845-022-01923-210.1007/s10845-022-01923-2 ↗
21. 10.1080/17480272.2021.192946610.1080/17480272.2021.1929466 ↗
22. 10.12841/wood.1644-3985.140.0810.12841/wood.1644-3985.140.08 ↗
23. Iskra P · Wood Fiber Sci · 2009 · 41 · 28
24. Prommul K, Kaewtatip P, Arlai T Investigation on the influences of cutting parameters in CNC machining of rubber wood with integration of neural networks. 2nd international symposium on wood machining; Vienna, Austria; 2004.
25. 10.15376/biores.14.2.3495-350510.15376/biores.14.2.3495-3505 ↗
26. 10.5755/j01.mech.23.3.1848210.5755/j01.mech.23.3.18482 ↗
27. Karagoz U · Pro Ligno · 2011 · 7 · 50
28. Lemaster RL · 1994
29. 10.1016/j.buildenv.2006.08.02810.1016/j.buildenv.2006.08.028 ↗
30. 10.1007/s00107-016-1098-y10.1007/s00107-016-1098-y ↗
31. Mitchell PH · Forest Prod J · 2002 · 52 · 85
32. Škaljić N · Drvna Indus · 2009 · 60 · 229
33. Sogutlu C. · J Polytech · 2010 · 13 · 177
34. Aykac E · Tehnički Vjesnik · 2021 · 28 · 684
35. 10.1007/BF0076728910.1007/BF00767289 ↗
36. 10.15376/biores.8.4.5435-544810.15376/biores.8.4.5435-5448 ↗
37. 10.3390/f1312212610.3390/f13122126 ↗
38. Kminiak R. · Innov Woodworking Ind Eng Des · 2019 · 8 · 105
39. Davis EM. · 1962
40. Koch P. · 1964
41. Stewart HA. · Wood Fiber Sci · 1980 · 12 · 175
42. 10.4028/www.scientific.net/AMR.1088.68010.4028/www.scientific.net/AMR.1088.680 ↗
43. 10.1080/10402004.2021.192602910.1080/10402004.2021.1926029 ↗
44. 10.15376/biores.8.2.3122-313510.15376/biores.8.2.3122-3135 ↗
45. Durkovic M · Maderas Ciencia Tecnol · 2018 · 20 · 25
46. 10.15376/biores.14.4.9271-928610.15376/biores.14.4.9271-9286 ↗
47. 10.15376/biores.12.4.7413-742610.15376/biores.12.4.7413-7426 ↗
48. 10.15376/biores.14.4.9500-950810.15376/biores.14.4.9500-9508 ↗
49. Salca E-A. · Dimensions · 2015 · 2000 · 160
50. 10.3390/machines1002010410.3390/machines10020104 ↗
51. Mendoza BA. · 1989
52. Berkel A. · 1972
53. 10.2737/FPL-GTR-19010.2737/FPL-GTR-190 ↗
54. 10.1051/forest:200308410.1051/forest:2003084 ↗
55. Gurleyen L · J Faculty Eng Architect Gazi Univ · 2009 · 24 · 209