3D creep cavitation characteristics and residual life assessment in high temperature steels: A critical review
Source abstract
Abstract
The need for a new paradigm to estimate remaining creep life of service exposed steels is critically assessed. New approaches to residual life assessment are proposed, in the light of a decade's experience of the use of micro-tomography to characterise the three-dimensional (3D) nature of cavitation damage in structural materials. Imaging of conventional structural materials such as steels with high absorption to X-rays has been realised by synchrotron micro-tomography (SR-μCT), providing new insights into phenomena such as creep failure. The unique feature of SR-μCT studies is the direct imaging in 3D of cavities (hundreds of micrometres in size) present in the bulk, revealing the spatial characteristics and morphology of the creep voids. Quantitative analyses of the cavitation characteristics revealed by 3D datasets, when scaled with respect to time, stress and temperature, provide functional information suitable for developing constitutive equations for creep. The application of SR-μCT, a non-destructive technique providing high fidelity data, significantly reduces the ambiguity in developing functional relationships to predict creep failure. The explicit use of such constitutive equations to estimate the residual life of components in creep, and the consequent assessment of structural integrity, would prove invaluable. Micro-tomography studies related to creep in materials are reviewed, with special emphasis on a 10·86%Cr heat resistant steel, to demonstrate the type of data available for life assessment and design against creep failure. A brief discussion of current methods to estimate residual life in the light of recent 3D micro-tomography data follows. Finally, the possibility of new approaches, using micro-tomography data in conjunction with destructive 3D approaches such as serial sectioning, to formulate advanced residual life estimates, is briefly considered.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels · Fatigue and fracture mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Mechanical Metallurgy Division, Materials Group, Bhabha Atomic Research Centre, Mumbai 400085, India
Department of Mechanical Engineering, Kyushu University, Nishi-Ku, Fukuoka 819-0359, Japan
Institute of Joining and Assembly, Chemnitz University of Technology, Reichenhainerstraβe 70, 09126 Chemnitz, Germany
Institute for Materials Science and Welding, Graz University of Technology, Kopernikussgasse 24/l-A 8010, Graz, Austria
References (100+)
Show source-provided references
1. Evans RW and Wilshire B: ‘Creep of metals and alloys’; 1985, London, The Institute of Metals.
2. 10.31399/asm.tb.dmlahtc.978162708340910.31399/asm.tb.dmlahtc.9781627083409 ↗
3. 10.1520/MONO3-EB10.1520/MONO3-EB ↗
4. 10.1016/j.cossms.2004.12.00110.1016/j.cossms.2004.12.001 ↗
5. 10.1038/nature0174010.1038/nature01740 ↗
6. 10.1007/BF0280116410.1007/BF02801164 ↗
7. 10.1179/02670830010150696610.1179/026708300101506966 ↗
8. 10.1016/0001-6160(89)90194-610.1016/0001-6160(89)90194-6 ↗
9. 10.1016/S0749-6419(02)00111-010.1016/S0749-6419(02)00111-0 ↗
10. 10.1533/9781845694012.1.1510.1533/9781845694012.1.15 ↗
11. 10.1016/j.ijpvp.2007.06.01010.1016/j.ijpvp.2007.06.010 ↗
12. 10.1179/174328406X14877810.1179/174328406X148778 ↗
13. Abe F: ‘Metallurgy for long term stabilisation of ferritic steels for thick section boiler components in USC power plant at 650°C’, Proc. 8th Liege Conf. on ‘Materials for advanced power engineering’, 965–980; 2006, Jülich, FZJ.
14. 10.2355/isijinternational.42.Suppl_S6710.2355/isijinternational.42.Suppl_S67 ↗
15. 10.1533/9781845694012.3.53910.1533/9781845694012.3.539 ↗
16. 10.1177/105678950505035710.1177/1056789505050357 ↗
17. Vishwanathan R and Tilley R: ‘Creep damage – industry needs and future research and development’, in ‘Creep resistant steels’, (ed. Abe F et al.), 637–666; 2008, Abington, Woodhead/Boca RatonFL, CRC Press.10.1533/9781845694012.3.637 ↗
18. Neubauer B and Wedel V: ‘Rest life estimation of creeping component by means of replication’, in ‘Advances in life prediction’, (ed. Woodford P A and Whitehead R), 317–324; 1983, New York, ASME.
19. Messerscmidt U, Bartsch M, Dietzsch C, Agamenone R, Gupta C and Blum W: unpublished research.
20. Chilukuru H: ‘On the microstructural basis of creep strength and creep-fatigue interaction in 9–12% Cr steels for application in power plants’, PhD thesis, University of Erlangen–Nuremburg, Germany, 2007.
21. 10.1533/9781845694012.2.36510.1533/9781845694012.2.365 ↗
22. StockSR: ‘Micro-computed tomography: methodology and applications’; 2009, Boca Raton, FL, CRC Press.
23. 10.1179/174328008X27780310.1179/174328008X277803 ↗
24. S. R. Stock: ‘X-ray microtomography of materials’, Int. Mater. Rev., 1999, 44, 141–164.10.1179/095066099101528261 ↗
25. Baruchel J, Buffiere J.Y, Maire E, Merle P and Piex G: ‘X-ray tomography in material science’; 2000, Paris, Hermes Science.
26. 10.1179/1743280413Y.000000002310.1179/1743280413Y.0000000023 ↗
27. 10.1016/j.nimb.2005.12.06310.1016/j.nimb.2005.12.063 ↗
28. 10.1051/rphysap:0198800230406050010.1051/rphysap:01988002304060500 ↗
29. Gupta C · Mater. Sci. Eng. A · 2103 · 564 · 52510.1016/j.msea.2012.12.002 ↗
30. 10.1179/174328406X11419910.1179/174328406X114199 ↗
31. 10.1063/1.482627410.1063/1.4826274 ↗
32. 10.1016/S1359-6454(99)00024-510.1016/S1359-6454(99)00024-5 ↗
33. 10.1016/S1359-6454(96)00311-410.1016/S1359-6454(96)00311-4 ↗
34. 10.1046/j.1460-2695.1998.00062.x10.1046/j.1460-2695.1998.00062.x ↗
35. 10.1098/rsta.1999.046410.1098/rsta.1999.0464 ↗
36. 10.1080/147864303100011575410.1080/1478643031000115754 ↗
37. 10.1016/j.msea.2004.01.09010.1016/j.msea.2004.01.090 ↗
38. 10.1016/S1359-6454(03)00053-310.1016/S1359-6454(03)00053-3 ↗
39. 10.1016/j.actamat.2007.12.05810.1016/j.actamat.2007.12.058 ↗
40. 10.1126/science.110677810.1126/science.1106778 ↗
41. 10.1016/j.msea.2009.11.05810.1016/j.msea.2009.11.058 ↗
42. 10.1016/j.actamat.2011.09.02210.1016/j.actamat.2011.09.022 ↗
43. 10.1016/j.msea.2007.05.10810.1016/j.msea.2007.05.108 ↗
44. 10.1016/j.actamat.2010.10.00310.1016/j.actamat.2010.10.003 ↗
45. 10.1016/j.msea.2005.08.22310.1016/j.msea.2005.08.223 ↗
46. 10.1016/j.scriptamat.2006.02.04510.1016/j.scriptamat.2006.02.045 ↗
47. 10.1016/j.actamat.2009.05.01010.1016/j.actamat.2009.05.010 ↗
48. 10.1016/j.msea.2007.10.01610.1016/j.msea.2007.10.016 ↗
49. 10.1016/j.matchar.2012.05.00410.1016/j.matchar.2012.05.004 ↗
50. Ke-shencheong · Mater. Sci. Eng. A · 2009 · 513 · 222
51. 10.1016/j.msea.2010.07.02910.1016/j.msea.2010.07.029 ↗
52. 10.1016/j.scriptamat.2008.05.00610.1016/j.scriptamat.2008.05.006 ↗
53. 10.1179/1743284714Y.000000059310.1179/1743284714Y.0000000593 ↗
54. Uchic MD: ‘Serial sectioning methods for generating 3D characterisation data of grain and precipitate scale microstructures’, in ‘Computational methods for microstructure–property relationships’, (ed. Ghosh S and Dimiduk D), 31–57; 2011, New York, Springer.10.1007/978-1-4419-0643-4_2 ↗
55. 10.1063/1.235928810.1063/1.2359288 ↗
56. 10.1038/srep0471110.1038/srep04711 ↗
57. 10.1179/1743284714Y.000000063910.1179/1743284714Y.0000000639 ↗
58. Robinson EL · Trans. ASME · 1938 · 160 · 253
59. 10.1179/03071697780329281710.1179/030716977803292817 ↗
60. 10.1179/03071697680339174610.1179/030716976803391746 ↗
61. 10.1179/03071697780329255610.1179/030716977803292556 ↗
62. Evans HE: ‘Mechanisms of creep fracture’; 1984, Barking, Elsevier Applied Science.
63. 10.1179/imr.1998.43.2.4510.1179/imr.1998.43.2.45 ↗
64. 10.1080/1478644050946330310.1080/14786440509463303 ↗
65. Graham A · JISI · 1955 · 179 · 105
66. 10.1115/1.401219210.1115/1.4012192 ↗
67. S. R. Holdsworth: ‘Constitutive equations for creep curves and predicting service life’, in ‘Creep resistant steels’ (ed. F. Abe. et. al.), 403–420; 2008 Abington; Woodhead/Boca Raton, FL, CRC Press.10.1533/9781845694012.2.403 ↗
68. Norton FN: ‘The creep of steel at high temperature’; 1929, New York, McGraw Hill.
69. Nadai A: ‘The influence of time upon creep, the hyperbolic sine creep law’, in ‘Stephen Timoshenko Anniversary volume’; 1938, New York, Macmillian.
70. 10.1016/j.jnucmat.2011.02.02410.1016/j.jnucmat.2011.02.024 ↗
71. 10.1016/j.proeng.2013.03.22010.1016/j.proeng.2013.03.220 ↗
72. 10.1016/j.proeng.2013.03.22110.1016/j.proeng.2013.03.221 ↗
73. Wilshire B and Scharning PJ: ‘Design data prediction for Grade P92 steel’, Proc. Creep 8: 8th Int. Conf. on ‘Creep and fatigue at elevated temperatures’, ASME Pressure Vessels and Piping Conference, San Antonio, TX, USA, July 2007.10.1115/CREEP2007-26754 ↗
74. 10.1179/1743284713Y.000000028110.1179/1743284713Y.0000000281 ↗
75. 10.1016/S0079-6425(99)00006-710.1016/S0079-6425(99)00006-7 ↗
76. 10.1016/j.ijpvp.2007.06.00310.1016/j.ijpvp.2007.06.003 ↗
77. 10.1016/0001-6160(82)90139-010.1016/0001-6160(82)90139-0 ↗
78. 10.1016/j.msea.2011.12.02210.1016/j.msea.2011.12.022 ↗
79. 10.1016/S0921-5093(01)01117-010.1016/S0921-5093(01)01117-0 ↗
80. Garofalo F: ‘Fundamentals of creep and creep rupture in metals’; 1965, New York, Macmillan.
81. 10.1179/imr.1987.32.1.24110.1179/imr.1987.32.1.241 ↗
82. 10.1016/0036-9748(69)90074-X10.1016/0036-9748(69)90074-X ↗
83. Evans RW and Wilshire B: ‘Creep of metals and alloys’; 1985, London, The Institute of Metals.
84. 10.1016/0022-3115(88)90387-X10.1016/0022-3115(88)90387-X ↗
85. 10.1016/0921-5093(91)90690-O10.1016/0921-5093(91)90690-O ↗
86. 10.1016/0921-5093(92)90290-H10.1016/0921-5093(92)90290-H ↗
87. 10.1016/j.proeng.2013.03.32710.1016/j.proeng.2013.03.327 ↗
88. 10.1016/0308-0161(94)00175-810.1016/0308-0161(94)00175-8 ↗
89. 10.1016/j.engfracmech.2006.08.01410.1016/j.engfracmech.2006.08.014 ↗
90. 10.1016/j.proeng.2013.03.30110.1016/j.proeng.2013.03.301 ↗
91. 10.1016/j.commatsci.2011.03.04710.1016/j.commatsci.2011.03.047 ↗
92. 10.1016/0001-6160(77)90135-310.1016/0001-6160(77)90135-3 ↗
93. Penny RK and Marriot DL: ‘Design for creep’; 1971, New York, McGraw Hill.
94. 10.1016/j.commatsci.2010.04.02210.1016/j.commatsci.2010.04.022 ↗
95. Kachanov LM · Izv. Akad. Navk SSR Otd Teck Nauck · 1958 · 8 · 26
96. 10.1007/978-94-017-1957-510.1007/978-94-017-1957-5 ↗
97. Dyson BF and McLean M: ‘Microstructural evolution and its effects on creep performance of high temperature alloy’, in ‘Microstructural stability of creep resistant alloys for high temperature plant applications’, (ed. Strang A et al.), 371–373; 1998, London, IOM Communications.
98. 10.1179/msc.1977.11.2.3710.1179/msc.1977.11.2.37 ↗
99. 10.1016/0001-6160(83)90059-710.1016/0001-6160(83)90059-7 ↗
100. 10.1016/0025-5416(88)90557-510.1016/0025-5416(88)90557-5 ↗