Influence of zirconium on mechanical properties and phase transformation in low carbon steel
Source abstract
Abstract
The influence of zirconium on the mechanical properties and phase transformation was investigated in low carbon steel. First, the steels are subjected to a special thermomechanical regime, and the hot rolled plates were used to characterise the tensile properties and impact toughness. Second, the phase transformation behaviour of the steels with various Zr contents was evaluated by both dilatometry and metallography. Finally, to confirm the existence of Zr containing precipitates in the Zr added steels, transmission electron microscopy and energy dispersive spectroscopy were used. It was verified that plenty of fine spherical (Nb,Ti,Zr)C, which is identified to be nearly 10 nm, can be formed when the concentration of Zr is in the range of 0.015–0.030. The effects of zirconium on the phase transformation, including proeutectoid ferrite and pearlite transformation, and mechanical properties evolution were also identified and discussed.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Key Laboratory for Ecological Metallurgy of Multimetallic Mineral Ministry of Education, School of Materials and Metallurgy, Northeastern University, Liaoning 110819, China
References (37)
Show source-provided references
1. 10.1007/BF0264347810.1007/BF02643478 ↗
2. 10.1016/S0921-5093(98)00804-110.1016/S0921-5093(98)00804-1 ↗
3. He K. J. · Mater. Sci. Eng. A · 1996 · 215 · 57
4. 10.1016/j.matchar.2005.05.00610.1016/j.matchar.2005.05.006 ↗
5. 10.1016/j.matlet.2009.10.05310.1016/j.matlet.2009.10.053 ↗
6. 10.1007/s11661-000-0117-z10.1007/s11661-000-0117-z ↗
7. 10.2355/isijinternational.46.71810.2355/isijinternational.46.718 ↗
8. 10.2355/isijinternational.48.30110.2355/isijinternational.48.301 ↗
9. 10.1016/S1006-706X(12)60063-610.1016/S1006-706X(12)60063-6 ↗
10. Chen Y. T. · Acta Metall. Sinica · 2005 · 18 · 96
11. 10.1016/j.matchar.2006.11.02810.1016/j.matchar.2006.11.028 ↗
12. 10.2355/isijinternational.53.138610.2355/isijinternational.53.1386 ↗
13. 10.2355/isijinternational.54.18810.2355/isijinternational.54.188 ↗
14. 10.2355/isijinternational.54.93210.2355/isijinternational.54.932 ↗
15. 10.1016/j.msea.2013.11.02810.1016/j.msea.2013.11.028 ↗
16. 10.1179/1743284714Y.000000054910.1179/1743284714Y.0000000549 ↗
17. 10.1179/cmq.1982.21.3.30910.1179/cmq.1982.21.3.309 ↗
18. 10.2355/isijinternational.45.120110.2355/isijinternational.45.1201 ↗
19. 10.1179/026708310X1279809263906110.1179/026708310X12798092639061 ↗
20. Guo J. · J. Univ. Sci. Technol. Beijing · 2008 · 30 · 1236
21. 10.1016/j.matchar.2013.10.02910.1016/j.matchar.2013.10.029 ↗
22. Li X. B. · Steel Res. Int · 1002
23. Li X. B. · Steel Res. Int · 1002
24. Cui Z. Q., and Tan Y. C. ‘Metal science and heat treatment’, 2008, Beijing, Machinery Industry Press.
25. Sarma D. S., Karasev A. V., and Jonsson P. G. ‘On the role of non-metallic inclusions in the nucleation of acicular ferrite in steels’, ISIJ Int. 2009, 49, 1063–1074.10.2355/isijinternational.49.1063 ↗
26. 10.4028/www.scientific.net/MSF.284-286.24510.4028/www.scientific.net/MSF.284-286.245 ↗
27. 10.1007/BF0267256710.1007/BF02672567 ↗
28. Wang X. M. · Mater. Sci. Eng. A · 2006 · 438 · 162
29. 10.1016/j.msea.2006.05.09810.1016/j.msea.2006.05.098 ↗
30. 10.1016/j.msea.2007.06.06910.1016/j.msea.2007.06.069 ↗
31. Li Y. Q. · Prog. Nat. Sci · 2000 · 10 · 331
32. Chen J. X. ‘Common use chart and thermodynamic data for steelmaking’, 2010, Beijing, Metallurgical Industry Press.
33. 10.1016/j.matdes.2011.06.04210.1016/j.matdes.2011.06.042 ↗
34. 10.1179/02670830122500075210.1179/026708301225000752 ↗
35. 10.1179/03071697480328758210.1179/030716974803287582 ↗
36. 10.1088/0370-1301/64/9/30310.1088/0370-1301/64/9/303 ↗
37. Petch N. J. · J. Iron Steel Inst · 1953 · 174 · 25