journal article·2019-01

Microstructure and mechanical properties of Mg–8Li– x Al–0.5Ca alloys

X. M. Xiong, Y. Yang, L. N. Ma, M. L. Li, F. J. Ren, J. W. Hu, G. B. Wei, X. D. Peng

Materials Science and Technology· Volume 35· Issue 1
Publisher page

Abstract

The effect of the Al content on the microstructure and mechanical behaviour of Mg–8Li– xAl–0.5Ca alloys is investigated. The experimental results show that an as-cast Mg–8Li–0.5Ca alloy is mainly composed of α-Mg, β-Li and granular Mg 2 Ca phases. With the addition of Al, the amount of α-Mg phase first increases and then decreases. In addition, the intermetallic compounds also obviously change. The microstructure of the test alloys is refined due to dynamic recrystallisation that occurs during extrusion. The mechanical properties of extruded alloys are much more desirable than the properties of as-cast alloys. The as-extruded Mg–8Li–6Al–0.5Ca alloy exhibits good comprehensive mechanical properties with an ultimate tensile strength of 251.2 MPa, a yield strength of 220.6 MPa and an elongation of 23.5%.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Hydrogen Storage and Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

International Joint Laboratory for Light Alloys (MOE), School of Materials Science and Engineering, Chongqing University, Chongqing, People's Republic of China

National Engineering Research Center for Magnesium Alloys, Chongqing University, Chongqing, People's Republic of China

Funding

National Natural Science Foundation · National Key Research and Development Program of China · Chongqing Research Program of Basic Research and Frontier Technology · Fundamental Research Funds for the Central Universities · 111 Project · State Administration of Foreign Experts Affairs

References (32)

Show source-provided references
1. 10.1016/j.msea.2010.01.02110.1016/j.msea.2010.01.021 ↗
2. 10.1016/j.matdes.2015.03.00310.1016/j.matdes.2015.03.003 ↗
3. 10.1179/1743284713Y.000000023710.1179/1743284713Y.0000000237 ↗
4. 10.1016/j.jma.2015.12.00110.1016/j.jma.2015.12.001 ↗
5. 10.1016/j.jma.2015.12.00110.1016/j.jma.2015.12.001 ↗
6. 10.1007/s11661-012-1441-910.1007/s11661-012-1441-9 ↗
7. 10.1016/j.jallcom.2017.12.02510.1016/j.jallcom.2017.12.025 ↗
8. 10.1179/1743284715Y.000000011910.1179/1743284715Y.0000000119 ↗
9. 10.1016/j.msea.2016.05.08510.1016/j.msea.2016.05.085 ↗
10. 10.1016/j.jma.2016.09.00310.1016/j.jma.2016.09.003 ↗
11. 10.1016/j.msea.2010.10.09510.1016/j.msea.2010.10.095 ↗
12. 10.1016/0956-7151(94)00269-N10.1016/0956-7151(94)00269-N ↗
13. 10.1016/S1003-6326(16)64107-910.1016/S1003-6326(16)64107-9 ↗
14. 10.1007/s10853-012-6920-210.1007/s10853-012-6920-2 ↗
15. Liping B · Rare Met Mater Eng · 2017 · 46 · 266
16. 10.1166/jnn.2016.1348410.1166/jnn.2016.13484 ↗
17. 10.1016/j.msea.2011.04.03410.1016/j.msea.2011.04.034 ↗
18. 10.1016/j.jallcom.2017.08.28910.1016/j.jallcom.2017.08.289 ↗
19. 10.1080/02670836.2017.135366410.1080/02670836.2017.1353664 ↗
20. 10.1016/j.matdes.2014.03.04610.1016/j.matdes.2014.03.046 ↗
21. 10.1016/j.jallcom.2015.06.06010.1016/j.jallcom.2015.06.060 ↗
22. 10.1016/j.msea.2009.11.04310.1016/j.msea.2009.11.043 ↗
23. 10.1016/j.jallcom.2012.05.02110.1016/j.jallcom.2012.05.021 ↗
24. 10.1016/j.msea.2006.07.14910.1016/j.msea.2006.07.149 ↗
25. 10.1007/s10854-009-9970-810.1007/s10854-009-9970-8 ↗
26. 10.1016/j.msea.2017.10.03610.1016/j.msea.2017.10.036 ↗
27. 10.1016/S1002-0721(12)60078-710.1016/S1002-0721(12)60078-7 ↗
28. Liu CM · 2006
29. 10.1016/j.msea.2010.11.06310.1016/j.msea.2010.11.063 ↗
30. 10.1016/j.msea.2012.01.06310.1016/j.msea.2012.01.063 ↗
31. Yong Q. The second phase in steels. Beijing: Metallurgical Industry Press; 2006. pp. 147–190.
32. 10.1016/j.msea.2014.12.03910.1016/j.msea.2014.12.039 ↗