Solidification microstructure and creep rupture behaviour of electron beam welded austenitic Fe-28M-6Al-1C alloy
Source abstract
Abstract
Austenitic Fe-28Mn-6Al-1C alloy was welded using the electron beam (EB) welding technique. After EB welding, fully austenitic microstructure was observed in the weld. Moreover, the entire weld consisted mainly of columnar dendrites with a preferred orientation. The growth and convergence of these columnar dendrites led to the formation of an apparent ‘parting’ in the weld centreline. The parting exhibited a lower hardness value while a peak hardness was observed in the heat affected zone (HAZ) of the weld. The higher hardness value in the HAZ was associated with the strain induced twinning caused by EB welding. Creep rupture tests of the weldment and the base metal were conducted at 873 K over a stress range of 225–350 MPa. Creep fracture of the weldments was observed to occur in the region of the parting. The rupture life and rupture ductility of the weldments were considerably lower than those of the base metal.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · High Temperature Alloys and Creep · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. 10.1016/0022-3115(84)90570-110.1016/0022-3115(84)90570-1 ↗
2. 10.1016/0025-5416(88)90539-310.1016/0025-5416(88)90539-3 ↗
3. 10.1007/BF0266302610.1007/BF02663026 ↗
4. 10.1007/BF0074146810.1007/BF00741468 ↗
5. TJONG S. C. · Mater. Sci. Eng., · 1986 · 90 · 3517
6. 10.1016/0956-7151(92)90054-I10.1016/0956-7151(92)90054-I ↗
7. AMUM D. K. · Steel. Res., · 1987 · 58 · 52810.1002/srin.198700260 ↗
8. LIPPERT A. K. · Weld. J., · 1987 · 66 · 29
9. CHOU C. R · J. Mater. Sci., · 1990 · 25 · 149110.1007/BF00585471 ↗
10. 10.1016/0036-9748(89)90268-810.1016/0036-9748(89)90268-8 ↗
11. 10.1179/imr.1982.27.1.18510.1179/imr.1982.27.1.185 ↗
12. 10.1007/BF0264555310.1007/BF02645553 ↗
13. NAICAO Y. · Trans. Jpn Weld. Soc., · 1988 · 19 · 100
14. DAVID S. A. · Weld. J. (Suppl · 1987 · 66 · 289–s
15. J. W. ELMER, S. M. ALLEN, and T. W. EAGAR: in ‘Recent trends in welding science and technology’, (ed. S. H. David and J. M. Vitek), 165; 1990, Materials Park, OH, ASM International.
16. LIPPOID J. C. · Weld. J. (Suppl · 1994 · 73 · 129–s
17. 10.1016/0022-3115(95)00142-510.1016/0022-3115(95)00142-5 ↗
18. 10.1007/BF0035622310.1007/BF00356223 ↗
19. 10.1007/BF0267259210.1007/BF02672592 ↗
20. SAVAGE W. F. · Weld. J. (Suppl · 1965 · 44 · 1–s
21. H. W. KERR: in ‘International trends in welding science and technology’, (ed. S. H. David and J. M. Vitek), 165; 1992, Materials Park, OH, ASM International.
22. OLSON D. L. · Weld. J. (Suppl · 1985 · 64 · 281–s
23. 10.1007/BF0265658210.1007/BF02656582 ↗