Prediction of solidification behaviour of weld pool through modelling of heat transfer and fluid flow during gas tungsten arc welding of commercial pure aluminium
Source abstract
Abstract
A mathematical model is developed to assess the solidification behaviour of the weld pools. To do so, during gas tungsten arc welding of commercial pure aluminium, equations of conversation of mass, energy and momentum are numerically solved considering three-dimensional steady state heat transfer and fluid flow conditions. The weld pool geometry, weld thermal cycles and various solidification parameters are calculated using temperature and velocity fields acquiring from the utilised model. The solidification behaviour of the weld pool at the weld centreline and the fusion line is then studied using the solidification parameters including temperature gradient G, solidification rate R and the combined forms G/R and GR. In order to verify the predictions, welding experiments are performed and geometry of the weld fusion zone is measured. The calculated geometry of the weld fusion zone is found to be in good agreement with the corresponding experimental result. The predictions show that the cooling rate GR increases toward the centreline while the other solidification parameter G/R shows a different behaviour. In addition, it is found that under the employed welding conditions, as the welding speed increases temperature gradients both at the weld centreline and at the fusion line are reduced.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Welding Techniques and Residual Stresses · Advanced Welding Techniques Analysis · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. 10.1007/s11837-003-0134-710.1007/s11837-003-0134-7 ↗
2. Lampman S. ‘Weld integrity and performance’, 1st edn; 1997, Materials Park, OH, ASM International.10.31399/asm.tb.wip.9781627083591 ↗
3. Savage W. F. · Welding World · 1980 · 18 · 89
4. 10.1179/imr.1989.34.1.21310.1179/imr.1989.34.1.213 ↗
5. 10.1007/BF0281604710.1007/BF02816047 ↗
6. 10.1080/1040778960891378210.1080/10407789608913782 ↗
7. 10.1007/BF0264592510.1007/BF02645925 ↗
8. 10.1007/s11663-000-0141-910.1007/s11663-000-0141-9 ↗
9. 10.1063/1.154074410.1063/1.1540744 ↗
10. 10.1088/0022-3727/36/12/30610.1088/0022-3727/36/12/306 ↗
11. 10.1063/1.159201210.1063/1.1592012 ↗
12. 10.1088/0022-3727/37/1/02310.1088/0022-3727/37/1/023 ↗
13. 10.1063/1.187303210.1063/1.1873032 ↗
14. 10.1007/s11663-001-0018-610.1007/s11663-001-0018-6 ↗
15. 10.1063/1.188627210.1063/1.1886272 ↗
16. Yang Z., Sista S., Elmer J. W., and DebRoy T.: Acta Mater. 2000, 48, 4813–4825.10.1016/S1359-6454(00)00279-2 ↗
17. 10.1016/S1359-6454(03)00049-110.1016/S1359-6454(03)00049-1 ↗
18. 10.1016/S0921-5093(01)01857-310.1016/S0921-5093(01)01857-3 ↗
19. 10.1007/s11663-000-0023-110.1007/s11663-000-0023-1 ↗
20. 10.1063/1.158700610.1063/1.1587006 ↗
21. 10.1007/BF0266752110.1007/BF02667521 ↗
22. 10.1201/978142005701010.1201/9781420057010 ↗
23. Patankar S. V. ‘Numerical heat transfer and fluid flow’; 1980, New York, Hemispher.
24. FLUENT: ‘FLUENT user's guide’, 2001.
25. Hatch J. E. ‘Aluminium: properties and physical metallurgy’; 1984, Metals Park, OH, American Society for Metals.
26. 10.1017/S002211208000039010.1017/S0022112080000390 ↗
27. 10.1007/s11663-006-9000-710.1007/s11663-006-9000-7 ↗
28. Lancaster J. F. ‘Metallurgy of welding’, 6th edn, 169-210; 1999, Cambridge, Abington.10.1533/9781845694869.169 ↗
29. Kou S. ‘Welding metallurgy’, 2nd edn; 2003, New York, Wiley Interscience.10.1002/0471434027 ↗