Hot deformation behaviour of thixocast Al–Si–Mg alloy during compression at elevated temperatures
Source abstract
Abstract
In the present study, the flow behaviour and constitutive equation of a Thixocast A356 Al alloy has been studied using the hot compression test at 450, 500 and 540°C under the strain rates of 0·0001, 0·0005, 0·001 and 0·01 s−1. The compression flow curves exhibited an initial sharp increase with strain followed by a moderate work hardening behaviour. The maximum stress was decreased as the strain rate reduced and the temperature increased. At the lowest examined temperature (450°C) and the highest applied strain rate (0·01 s−1), a flow softening behaviour was observed. This was attributed to the morphological changes of the present precipitates.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metallurgy and Material Forming · Microstructure and mechanical properties · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Metallurgical and Materials EngineeringUniversity of Tehran, Tehran, PO Box 14395-1554, IRAN
JAMC Ltd
References (25)
Show source-provided references
1. 10.1016/j.matchar.2005.02.00610.1016/j.matchar.2005.02.006 ↗
2. 10.1007/s11661-003-0189-710.1007/s11661-003-0189-7 ↗
3. Estey C. M., Cockcroft S. L., Maijer D. M., and Hermesmann C.: Mater. Sci. Eng. A, 2004, A383, (2),245–251.10.1016/j.msea.2004.06.004 ↗
4. Haghshenas M., Zarei-Hanzaki A., and Fatemi-Varzaneh S. M.: Mater. Set Eng. A, 2008, A480, (1-2),68–74.10.1016/j.msea.2007.06.075 ↗
5. Haghshenas M., Zarei-Hanzaki A., and Hemmati A. R.: Proc. 6th Conf. on ‘Metals structures’, Rzeszow, Poland, 21-23 June 2006, ICMS.
6. McQueen H. J.: The Symposium Hot deformation of aluminium, Detroit, TMS, Warrendale, PA, 1991.
7. Spigarelli S., Evangelista E., and McQueen H. J.: Scripta Mater. 2003, 49, (2), 179–183.10.1016/S1359-6462(03)00206-9 ↗
8. McQueen H. J., and Blum W.: Mater. Sci. Eng. A, 2000, A290, (1-2),95–107.10.1016/S0921-5093(00)00933-3 ↗
9. 10.1016/0956-7151(94)00267-L10.1016/0956-7151(94)00267-L ↗
10. Verlinden B., Wouters P., McQueen H. J., Aernoudt E., Delaey L., and Cauwenberg S.: Mater. Sci. Eng. A, 1990, A123, (2),229–237.10.1016/0921-5093(90)90288-E ↗
11. van de Langkruis J., Kool W. H., and van der Zwaag S.: Mater. Sci. Eng. A, 1999, A266, (1-2),135–145.10.1016/S0921-5093(99)00046-5 ↗
12. Shivkumar S., Ricci S., and Apelian D.: AFS Trans. 1990, 98, 913–922.
13. Guiglionda G., and Poole W. J.: Mater. Sci. Eng. A, 2002, A336, (1-2),159–169.10.1016/S0921-5093(01)01971-2 ↗
14. 10.1016/S0167-6636(97)00035-510.1016/S0167-6636(97)00035-5 ↗
15. 10.1016/j.matchar.2006.04.01210.1016/j.matchar.2006.04.012 ↗
16. 10.1007/BF0266384110.1007/BF02663841 ↗
17. 10.1016/0921-5093(94)09714-310.1016/0921-5093(94)09714-3 ↗
18. 10.1007/BF0264797110.1007/BF02647971 ↗
19. van de Langkruis J., Kool W. H., Sellars C. M., van der Winden M. R., and van der Zwaag S.: Mater. Sci. Eng. A, 2001, A299, (1-2),105–115.10.1016/S0921-5093(00)01421-0 ↗
20. Shi H.: Light Metals Processing and Applications, 1993, Canada.
21. Cerri E., Spigarelli S., Evangelista E., and Cavaliere P.: Mater. Sci. Eng. A, 2002, A324, (1-2),157–161.10.1016/S0921-5093(01)01299-0 ↗
22. Wouters P., Verlinden B., McQueen H. J., Aernoudt E., Delaey L., and Cauwenberg S.: Mater. Sci. Eng. A, 1990, A123, (2),239–245.10.1016/0921-5093(90)90289-F ↗
23. Bardi F., Cabibbo M., Evangelista E., and Spigarelli S.: Mater. Sci. Eng. A, 2003, A339, (1-2),43–52.10.1016/S0921-5093(02)00103-X ↗
24. Prasad Y. V. R. K., and Sasidhara S. ‘Hot working guide’; 1997, Materials Park, OH, ASM International.
25. Prasad Y. V. R. K., and Seshacharyulu T.: Mater. Sci. Eng. A, 1998, A243, (1-2),82–88.10.1016/S0921-5093(97)00782-X ↗