journal article·2011-07

Effect of Ce on microstructures and mechanical properties of rapidly solidified Mg–Zn alloy

T Zhou, H Xia, Z H Chen

Materials Science and Technology· Volume 27· Issue 7
Publisher page

Abstract

The rapidly solidified (RS) Mg–Zn based alloys with Ce addition were produced via atomising the alloy melt and subsequent splat quenching on the water cooled copper twin rollers in the form of flakes. The effects of Ce additions on the microstructures, phase compositions, thermal stability and isochronal age hardening behaviour of the RS Mg–Zn alloy were systematically investigated. The RS Mg–6Zn alloy is characterised by fine grains in the size of 6–10 μm and is composed of α-Mg, Mg51Zn20 and a small quantity of MgZn2 and Mg2Zn3 phases. With the increment of Ce, the microstructures of the alloys are refined, and the volume fractions of dispersions are increased remarkably. The stable intermetallic compounds, i.e. the MgxZnyCez ternary phases, are formed in the RS Mg–Zn–Ce alloys at the expense of the Mg51Zn20 phases, which leads to the enhanced thermal stability of the alloys, especially for the Mg–6Zn–5Ce alloy. In the alloy, the atomic percentage ratio of Zn/Ce in the MgxZnyCez phase is close to two, and the maximum hardness is 91·5±7 HV after annealing at 200°C for 1 h. However, the age hardening behaviour of the alloys decreases with the increment of Ce, and the main reason is discussed.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Corrosion Behavior and Inhibition

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

College of Material Science and Engineering Chongqing University of Technology, Chongqing 400054, China

College of Material Science and Engineering, Hunan University, Changsha 410082, China

References (33)

Show source-provided references
1. Liu ZL · Mater. Mech. Eng. · 2001 · 25 · 1
2. Liu GQ · Spec. Cast. Nonferr. Alloys · 2005 · 25 · 496
3. Ji ZS · Light Alloy Fabr. Technol. · 2001 · 29 · 1
4. Chen XQ · Mater. Rev. · 2008 · 22 · 58
5. 10.1016/j.scriptamat.2007.02.02410.1016/j.scriptamat.2007.02.024 ↗
6. 10.1016/j.msea.2006.03.14110.1016/j.msea.2006.03.141 ↗
7. 10.1016/0025-5416(88)90116-410.1016/0025-5416(88)90116-4 ↗
8. 10.1007/BF0065243710.1007/BF00652437 ↗
9. Drits ME · Russ. Metall. · 1971 · 1 · 143
10. Dobatkina TV · Russ. Metall. · 1987 · 1 · 205
11. Drits ME · Russ. Metall. · 1989 · 2 · 195
12. 10.1007/BF0267066610.1007/BF02670666 ↗
13. 10.4028/www.scientific.net/MSF.561-565.19910.4028/www.scientific.net/MSF.561-565.199 ↗
14. 10.1016/0956-716X(93)90388-910.1016/0956-716X(93)90388-9 ↗
15. 10.1016/0956-716X(95)00180-410.1016/0956-716X(95)00180-4 ↗
16. Singh A: ‘Magnesium technology’, 337–342; 2008, Warrendale, PA, TMS Publications.
17. Janot C: ‘Quasicrystals’, 76–77; 1994, Oxford, Clarendon Press.10.1007/978-3-662-22223-2_9 ↗
18. 10.1023/A:101869592771710.1023/A:1018695927717 ↗
19. 10.2320/matertrans1989.32.87510.2320/matertrans1989.32.875 ↗
20. 10.2320/matertrans1989.32.87510.2320/matertrans1989.32.875 ↗
21. 10.2464/jilm.56.54310.2464/jilm.56.543 ↗
22. 10.1016/S1003-6326(10)60183-510.1016/S1003-6326(10)60183-5 ↗
23. Clark JB, Zabfyr L, Moser Z: ‘Binary alloy phase diagrams’, 1563–1566; 1986, Metals Park, OH, American Society for Metals.
24. Zhu M: ‘Effect of Ca and RE on the microstructures and properties of Mg–Zn based alloys’, ME thesis, Southeast University, Nanjing, China, 2003.
25. 10.1016/S1006-7191(08)60055-110.1016/S1006-7191(08)60055-1 ↗
26. Yu K · Rare Met. Mater. Eng. · 2005 · 34 · 1013
27. 10.1016/j.msea.2007.04.00810.1016/j.msea.2007.04.008 ↗
28. 10.1007/BF0185559410.1007/BF01855594 ↗
29. 10.1007/BF0267075710.1007/BF02670757 ↗
30. 10.1016/j.jallcom.2006.02.05410.1016/j.jallcom.2006.02.054 ↗
31. Du WW · Mater. Sci. Eng. A · 2003 · 356 · 110.1016/S0921-5093(02)00551-8 ↗
32. 10.1016/j.scriptamat.2004.10.01710.1016/j.scriptamat.2004.10.017 ↗
33. Chen ZH, Yan HG, Chen JH: ‘Magnesium alloy’, 175–185; 2004, Beijing, Chemical Industry Press.