Effect of starting microstructure on austenite grain sizes developed after reheating of HSLA steel
Source abstract
Abstract
Austenite grain structure has been studied over a wide range of soaking temperatures (950–1250°C) in a high strength low alloy steel containing Nb, Ti and V for different starting conditions, namely as cast, hot rolled and thermomechanical controlled rolled. Mixed (or bimodal) austenite grain structures were developed as a result of abnormal grain growth at different soaking temperatures in as cast slab (∼1200°C) and in rolled plates (∼1000°C), which has hardly been reported earlier. Higher fraction of finer precipitates, such as NbC and VC (<200 nm in size), were present in the rolled plate as compared to as cast slab, where the precipitates were coarser and complex in nature. Rapid dissolution of fine VC precipitates was primarily responsible for the observed abnormal grain growth in rolled plates at lower soaking temperature (∼1000°C). Coarse precipitates of complex nature, such as (Nb,Ti,V)(C,N) and (Nb,Ti)(C,N), remained stable up to ∼1150°C and restricted the formation of abnormal grain growth in as cast steel.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Metallurgical and Materials Engineering, Indian Institute of Technology (I.I.T.) Kharagpur, 721 302, West Bengal, India
Products Research Group, Research and Development, Tata Steel, Jamshedpur, 831 001, India
Materials Science Division, Bhabha Atomic Research Centre, 400 085, Mumbai, India
References (44)
Show source-provided references
1. Gladman T: ‘The physical metallurgy of microalloyed steels’; 1997, London, The Institute of Materials.
2. 10.1179/mst.1987.3.3.19710.1179/mst.1987.3.3.197 ↗
3. 10.1016/j.msea.2006.08.00710.1016/j.msea.2006.08.007 ↗
4. Tither G: Proc. 2nd Int. Conf. on ‘HSLA steels: processing, properties and applications’, (ed. Tither G et al.), 61–80; 1992, Beijing, TMS.
5. 10.1007/s11661-000-0287-810.1007/s11661-000-0287-8 ↗
6. Porter DA and Easterling KE: ‘Phase transformations in metals and alloys’, 2nd edn; 2001, Cheltenham, Stanley Thornes.
7. 10.1007/BF0266236610.1007/BF02662366 ↗
8. 10.1007/BF0264797310.1007/BF02647973 ↗
9. 10.1007/s11661-008-9535-010.1007/s11661-008-9535-0 ↗
10. Gladman T · Proc. R. Soc. Lond. · 1966 · 294 · 298
11. 10.1111/j.0022-2720.2004.01311.x10.1111/j.0022-2720.2004.01311.x ↗
12. 10.1016/0956-7151(90)90264-H10.1016/0956-7151(90)90264-H ↗
13. 10.2355/isijinternational.43.143110.2355/isijinternational.43.1431 ↗
14. 10.1016/S0308-0161(98)00066-010.1016/S0308-0161(98)00066-0 ↗
15. 10.1016/S1006-7191(06)60024-010.1016/S1006-7191(06)60024-0 ↗
16. 10.2355/isijinternational.41.4610.2355/isijinternational.41.46 ↗
17. 10.1016/1044-5803(93)90006-H10.1016/1044-5803(93)90006-H ↗
18. 10.2355/isijinternational.47.30710.2355/isijinternational.47.307 ↗
19. 10.1007/BF0259543310.1007/BF02595433 ↗
20. 10.2355/isijinternational.36.19410.2355/isijinternational.36.194 ↗
21. 10.1016/j.matchar.2006.06.01410.1016/j.matchar.2006.06.014 ↗
22. 10.1007/s11661-011-1045-910.1007/s11661-011-1045-9 ↗
23. 10.2355/isijinternational.36.139710.2355/isijinternational.36.1397 ↗
24. Ruiz-Aparicio A: Evolution of microstructure in Nb-bearing microalloyed steels produced by the compact strip production process Master's thesis, University of Pittsburgh, Pittsburgh, PA, 2004.
25. 10.1016/S1359-6462(00)00617-510.1016/S1359-6462(00)00617-5 ↗
26. 10.1016/S1006-706X(08)60129-610.1016/S1006-706X(08)60129-6 ↗
27. 10.1016/0001-6160(87)90242-210.1016/0001-6160(87)90242-2 ↗
28. 10.1016/j.matlet.2009.07.06410.1016/j.matlet.2009.07.064 ↗
29. 10.4028/www.scientific.net/MSF.284-286.51710.4028/www.scientific.net/MSF.284-286.517 ↗
30. 10.1016/0924-0136(95)01971-G10.1016/0924-0136(95)01971-G ↗
31. 10.1016/j.matlet.2006.09.02110.1016/j.matlet.2006.09.021 ↗
32. 10.1179/mst.1991.7.2.17610.1179/mst.1991.7.2.176 ↗
33. 10.1002/srin.19970057410.1002/srin.199700574 ↗
34. 10.1002/srin.20100002110.1002/srin.201000021 ↗
35. Krauss G · Metall. Trans. B · 2002 · 34 · 78110.1007/s11663-003-0084-z ↗
36. 10.1016/j.actamat.2005.10.03710.1016/j.actamat.2005.10.037 ↗
37. 10.1016/0022-3697(61)90054-310.1016/0022-3697(61)90054-3 ↗
38. 10.1179/msc.1969.3.1.9510.1179/msc.1969.3.1.95 ↗
39. Agren J · Scand. J. Metall. · 1990 · 19 · 2
40. 10.1179/1743284711Y.000000000110.1179/1743284711Y.0000000001 ↗
41. 10.1016/j.actamat.2011.11.01610.1016/j.actamat.2011.11.016 ↗
42. 10.1179/mst.1991.7.3.24910.1179/mst.1991.7.3.249 ↗
43. 10.1007/s10853-006-1191-410.1007/s10853-006-1191-4 ↗
44. 10.1016/0956-7151(90)90177-I10.1016/0956-7151(90)90177-I ↗