journal article·2013-10Open access

Heterogeneous austenite grain growth in martensitic 9cr steel: Coupled influence of initial metallurgical state and heating rate

N. Zavaleta Gutiérrez, M. I. Luppo, C. A. Danon, I. Toda-Caraballo, C. Capdevila, C. García de Andrés

Materials Science and Technology· Volume 29· Issue 10

Abstract

The coupled influence of the initial metallurgical state and the heating rate to austenite on the occurrence of heterogeneous grain growth during austenitisation of an ASTM A213–T91 steel has been studied. To that aim, two-step thermal cycles were designed. In the first step, different starting metallurgical conditions were obtained by treating the as received material at 780°C for increasing times up to 6 h. In the second step, in situ austenitisation was performed by heating to austenite at rates of 1, 30 and 50°C s−1 and then holding at 1050°C for 30’. Two types of austenite grain structures were obtained after austenitisation, namely, homogeneous and heterogeneous. The homogeneous structure was characterised by a smooth size distribution of approximately equiaxed, normally grown grains. The heterogeneous structure, instead, exhibited the exaggerated growth of a few austenite grains embedded in a small to medium sized matrix. For the 1°C s−1 heating rate and all of the initial metallurgical states, only homogeneous grain growth was observed, whereas for the 50°C s−1 heating rate only heterogeneous grain growth was observed regardless the starting metallurgical condition. Instead, the occurrence of homogeneous or heterogeneous grain growth after heating at 30°C s−1 was observed to be a function of the time of previous tempering. Some explanations of the phenomenon are advanced taking into account the precipitation state of second phases.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · High Temperature Alloys and Creep · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Engineering Faculty, Mining and Metallurgy Department, Av. Juan Pablo II s/n, Trujillo National University, Peru

National Commission of Atomic Energy, Materials Department Av. Gral. Paz 1499, 1650 San Martín, Buenos Aires, Argentina

Materalia Research Group, Physical Metallurgy Department Centro Nacional de Investigaciones Metalúrgicas (CENIM), Consejo Superior de Investigaciones Científicas (CSIC) Avda. Gregorio del Amo, 8. E-28040 Madrid, Spain

Department Materials Science and Metallurgy, University of Cambridge, Pembroke Street, Cambridge, CB2 3QZ, UK

References (55)

Show source-provided references
1. 10.2355/isijinternational.32.17510.2355/isijinternational.32.175 ↗
2. 10.2355/isijinternational.41.61210.2355/isijinternational.41.612 ↗
3. 10.1179/174328005X4114010.1179/174328005X41140 ↗
4. 10.2355/isijinternational.41.64110.2355/isijinternational.41.641 ↗
5. 10.2355/isijinternational.39.87410.2355/isijinternational.39.874 ↗
6. 10.1016/S0921-5093(00)00831-510.1016/S0921-5093(00)00831-5 ↗
7. Zener C · AIME · 1948 · 175 · 15
8. Gladman T · J. Iron Steel Inst. · 1967 · 205 · 653
9. Speich GR, Cuddy LJ, Gordon CR, DeArdo AJ: ‘Phase transformations in ferrous alloys’; 1984, Warrendale, PA, TMS-AIME.
10. 10.1007/BF0266236610.1007/BF02662366 ↗
11. Gulyaev AP · Metalloved. Term. Obrab. Metallov. · 1977 · 4 · 2
12. 10.1179/174328408X37469410.1179/174328408X374694 ↗
13. 10.4028/www.scientific.net/SSP.172-174.45810.4028/www.scientific.net/SSP.172-174.458 ↗
14. 10.1179/msc.1979.13.3-4.13110.1179/msc.1979.13.3-4.131 ↗
15. 10.1007/BF0035280110.1007/BF00352801 ↗
16. Rossi A, Mascanzoni A, Crispoldi G, de Meo F: Proc. Fundamentals of Microalloying Forging Steels, The Met. Soc. of AIME, Warrendale, PA, 1987.
17. Baker T: ‘Future developments of metals and ceramics’; 1992, London, Institute of Materials.
18. 10.2320/matertrans.45.279710.2320/matertrans.45.2797 ↗
19. Brachet JC · Mém. Et. Sci. Rev. Mét. · 1990 · 87 · 33
20. 10.1016/S0921-5093(02)00632-910.1016/S0921-5093(02)00632-9 ↗
21. Abe F · Mater. Sci. Eng. Energy · 2012 · 4 · 166
22. 10.1007/BF0119196210.1007/BF01191962 ↗
23. Morozov OP · Phys. Met. Metall. · 1986 · 61 · 100
24. 10.1016/S1044-5803(02)00259-010.1016/S1044-5803(02)00259-0 ↗
25. ASTM Standard C33, Standard Test Methods for Determining Average Grain Size, ASTM International, West Conshohocken, PA, 2003.
26. 10.1051/metal/19939002024510.1051/metal/199390020245 ↗
27. 10.2355/isijinternational.43.72610.2355/isijinternational.43.726 ↗
28. 10.1016/j.scriptamat.2008.01.01910.1016/j.scriptamat.2008.01.019 ↗
29. 10.2355/isijinternational.45.191510.2355/isijinternational.45.1915 ↗
30. 10.1179/174328408X26564010.1179/174328408X265640 ↗
31. 10.1179/026708309X1250693387326010.1179/026708309X12506933873260 ↗
32. 10.1016/j.msea.2011.01.11610.1016/j.msea.2011.01.116 ↗
33. 10.1016/0956-716X(91)90240-210.1016/0956-716X(91)90240-2 ↗
34. 10.2355/isijinternational.47.117810.2355/isijinternational.47.1178 ↗
35. 10.1016/S0364-5916(01)00046-310.1016/S0364-5916(01)00046-3 ↗
36. Davies H: ‘MTDATA – a tool for research and development in materials’, National Physical Laboratory, Teddington, UK, 2003.
37. Andrews KW · JISI · 1965 · 203 · 721
38. 10.1016/S0921-5093(04)00939-610.1016/S0921-5093(04)00939-6 ↗
39. 10.1007/s10853-006-0881-210.1007/s10853-006-0881-2 ↗
40. 10.1007/BF0322281510.1007/BF03222815 ↗
41. 10.2355/isijinternational.34.19810.2355/isijinternational.34.198 ↗
42. 10.1016/0956-716X(91)90240-210.1016/0956-716X(91)90240-2 ↗
43. 10.1007/BF0266109810.1007/BF02661098 ↗
44. 10.2355/isijinternational.45.10710.2355/isijinternational.45.107 ↗
45. 10.2355/isijinternational.41.17510.2355/isijinternational.41.175 ↗
46. 10.1007/s11661-004-0299-x10.1007/s11661-004-0299-x ↗
47. Saito Y, Matsuzaki A, Shiga C: Proc. 8th Int Conf. on ‘Heat treatment of materials’, Kyoto, Japan, 1992, The Iron and Steel Insitute.
48. 10.1016/S1359-6454(96)00284-410.1016/S1359-6454(96)00284-4 ↗
49. 10.1007/BF0270043610.1007/BF02700436 ↗
50. 10.2355/isijinternational1966.14.44410.2355/isijinternational1966.14.444 ↗
51. 10.1007/BF0264287510.1007/BF02642875 ↗
52. 10.1016/j.actamat.2011.03.00610.1016/j.actamat.2011.03.006 ↗
53. Speich GR · Trans. Metall. Soc. AIME · 1969 · 245 · 1063
54. Huntz AM · Mem. Sci. Rev. Metall. · 1969 · 66 · 85
55. Shtansky DV, Nakai K, Ohmori Y: Metallkd Z, 1999, 90, 25.10.1515/ijmr-1999-900106 ↗