journal article·1997-02

Mechanical properties of powder metallurgy duplex stainless steels

E. Hämäläinen, A. Laitinen, H. Hänninen, J. Liimatainen

Materials Science and Technology· Volume 13· Issue 2
Publisher page

Abstract

Mechanical properties of experimental nitrogen alloyed powder metallurgically produced duplex stainless steels were investigated. The microstructure of the studied powder metallurgically (PM) fabricated and hot isostatically pressed (hipped) duplex stainless steels was homogeneous and isotropic. The proportions of austenite and ferrite phases depended on the solution annealing temperature; the amount of austenite phase increased from 50 to 60% on lowering the solution annealing temperature from 1160 to 980°C. An increase in the oxygen content of PM hipped duplex stainless steels had a negative effect on impact toughness. Precipitation heat treatment of both copper containing and low copper content alloys between 350 and 550°C increased the tensile properties while maintaining impact toughness at a reasonable level. The mechanical properties of nitrogen alloyed PM hipped duplex stainless steels were equal to the properties of corresponding wrought duplex stainless steels or better.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Corrosion Behavior and Inhibition · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. 10.1179/mst.1992.8.8.68510.1179/mst.1992.8.8.685 ↗
2. OKAMOTO H.: in ‘Applications of stainless steel ‘92’ Vol. 1 360-369; 1992 Stockholm Kristianstad Boktryckeri.
3. CHARLES J.: in Proc. Conf. ‘Duplex stainless steels ‘91’ Vol. 1 3-48; 1991 Les Ulis Cedex Les Editions de Physique.
4. LINDENMO M.: in ‘Stainless steels ‘87’ 34–37; 1988 London The Institute of Metals.
5. LINDENMO M.: in ‘Applications of stainless steels ‘92’ Vol. 2 684-693; 1992 Stockholm Kristianstad Boktryckeri.
6. HÄMÄLÄINEN E. LAITINEN A. HÄNNINEN H. and LIIMATAINEN J.: in Proc. Conf. ‘Duplex stainless steels ‘94’ Glasgow UK November 1994 TWI Paper 122.
7. JACKSON E. M. L. E. M. and MATTHEWS L. M.: in Proc. Conf. ‘Stainless steels ‘91’ Chiba Japan June 1991 Japan Iron and Steel Institute 730-737.
8. NYSTRöM M. KARLSSON B. and WASEN J.: in Proc. Conf. ‘Stainless steels ‘91’ Chiba Japan June 1991 Japan Iron and Steel Institute 738-745.
9. 10.5006/1.329364110.5006/1.3293641 ↗
10. 10.1080/02670836.1996.1166572310.1080/02670836.1996.11665723 ↗
11. ROMU J.: ‘Manufacturing of P/M high-nitrogen stainless steels’, Licentiate thesis, Helsinki University of Technology, 1994, 177.
12. NORDBERG H.: in Proc. Conf. ‘Stainless steel Europe 1993: processing material innovation in stainless steel products’ Florence Italy October 1993 Associazione Italiana di Metallurgia Vol. 2 217-229.
13. NILSSON J.-O. WILSON A. JOSEFSSON B. and THORVALDSSON T.: in ‘Applications of stainless steels ‘92 Vol. 1 280-289; 1992 Stockholm Kristianstad Boktryckeri.
14. OH B. W. KIM J. I. JEONG S. W. KWON H. S. HONG S. H. and Kim Y. G.: in Proc. Conf. ‘Stainless steel Europe 1993: processing material innovation in stainless steel products’ Florence Italy October 1993 Associazione Italiana di Metallurgia 3.59-3.64.
15. OKAMOTO H. TSUDA K. AZUMA S. UEDA M. OGAWA K. and IGARASHI M.: in Proc. Conf. ‘Duplex stainless steels ‘94’ Glasgow UK November 1994 TWI Paper 91.
16. CHARLES J.: in Proc. Conf. ‘Duplex stainless steels ‘94’ Glasgow UK November 1994 TWI keynote paper KI.
17. HERZMAN S. NILSSON M. and JARGELIUS-PETTERSSON R.: in Proc. Conf. ‘Duplex stainless steels ‘94’ Glasgow UK November 1994 TWI Paper 1.
18. JARGELIUS R. F. A.: in Proc. Conf. ‘Stainless steels ‘87’ 266-272; 1988 London The Institute of Metals.
19. WAHLBERG G.: ‘The role of nitrogen in duplex stainless steels’, PhD thesis, Chalmers University of Technology, Gothenburg, Sweden, 1989, 200.
20. MADERUD C.-J. ANDERSSON J.-O. and LILJAS M.: in ‘Applications of stainless steels ‘92’ Vol. 1 370-378; 1992 Stockholm Kristianstad Boktryckeri.
21. WAHLBERG G. and DUNLOP G. L.: in Proc. Conf. ‘Stainless steels ‘87’ 291-299; 1988 London The Institute of Metals.
22. 10.1016/0956-716X(93)90300-H10.1016/0956-716X(93)90300-H ↗
23. WEBER L. and UGGOWITZER R J.: in Proc. Conf. ‘High performance steels for structural applications’ Cleveland OH October—November 1995 ASM International 291-298.
24. CHRISTIANUS D.: in ‘Duplex stainless steels ‘91’ Vol. 2 1353-1361; 1991 Les Ulis Cedex Les Editions de Physique.
25. 10.1179/pom.1988.31.1.3310.1179/pom.1988.31.1.33 ↗
26. BYRNE G. SPENCE M. A. OLSEN B. HOUGHTON P. J. and McMAHON J.: in Proc. Conf. ‘Duplex stainless steels ‘94’ Glasgow UK November 1994 TWI Paper 19.