Characterisation of secondary phases in Ni-base superalloy Rene 65
Source abstract
Abstract
The Ni-base superalloy Rene 65 is a newly introduced cast and wrought alloy, used for turbine disc applications in aero-engines. The fine-grained and γ′-strengthened alloy was developed to increase service temperatures up to over 700°C and therefore, enhance the efficiency of aerospace turbines. In this work, the phases occurring in the as-received material as well as after continuous cooling experiments are characterised by transmission electron microscopy (TEM). In the as-received material, a tri-modal γ′ size distribution is found, ranging from a few nanometres up to approx. 5 µm. In addition, borides are found preferentially at grain boundaries with a size of approx. 1 µm. For different cooling rates, a change in morphology and size distribution of γ′ precipitates is found. This is part of a thematic issue on Nanoscale Materials Characterisation and Modeling by Advances Microscopy Methods - EUROMAT.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High Temperature Alloys and Creep · Advanced Materials Characterization Techniques · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Institute for Materials Science and Technology, TU Wien, Wien, Austria
Funding
Austrian Federal Government
References (22)
Show source-provided references
1. 10.1007/BF0054979610.1007/BF00549796 ↗
2. Laurence A, Cormier J, Villechaise P, Impact of the solution cooling rate and of thermal aging on the creep properties of the new cast & wrought René 65 Ni-based superalloy. Proc. 8th Int. Symp. Superalloy 718 Deriv. Hoboken, NJ: John Wiley & Sons, Inc.; 2014. p. 333–348.10.1002/9781119016854.ch27 ↗
3. Wessman A, Laurence A, Cormier J, Thermal stability of cast and wrought alloy Rene 65. Superalloys 2016. Hoboken, NJ: John Wiley & Sons, Inc.; 2016. p. 793–800.10.1002/9781119075646.ch85 ↗
4. Moyer JM, Jackman LA, Adasczik CB, Advances in triple melting superalloys 718, 706 and 720. Superalloys 718, 625, 716 Deriv. PA: Pittsburgh; 1994. p. 39–48.10.7449/1994/Superalloys_1994_39_48 ↗
5. Bond BJ, O'Brien CM, Russell JL, René 65 Billet material for forged turbine components. Proc. 8th Int. Symp. Superalloy 718 Deriv. Hoboken, NJ: John Wiley & Sons, Inc.; 2014. p. 107–118.10.1002/9781119016854.ch9 ↗
6. 10.1016/0001-6160(83)90062-710.1016/0001-6160(83)90062-7 ↗
7. Radis R, Schaffer M, Albu M, Evolution of size and morphology of γ’ precipitates in UDIMET 720 Li during continuous cooling. Superalloys 2008 Eleventh Int. Symp. TMS. PA: Champion; 2008. p. 829–836.10.7449/2008/Superalloys_2008_829_836 ↗
8. 10.1016/j.msea.2004.06.01810.1016/j.msea.2004.06.018 ↗
9. 10.1007/s11661-008-9691-210.1007/s11661-008-9691-2 ↗
10. 10.1016/S1359-6454(01)00314-710.1016/S1359-6454(01)00314-7 ↗
11. 10.1007/s11661-009-0075-z10.1007/s11661-009-0075-z ↗
12. 10.1016/j.matchar.2011.06.00210.1016/j.matchar.2011.06.002 ↗
13. 10.1016/j.actamat.2012.09.05810.1016/j.actamat.2012.09.058 ↗
14. 10.1016/j.scriptamat.2007.06.01410.1016/j.scriptamat.2007.06.014 ↗
15. 10.1016/j.actamat.2009.02.01010.1016/j.actamat.2009.02.010 ↗
16. Wlodek ST, Kelly M, Alden DA. The structure of Rene’ 88DT. Superalloys 1996; Eighth Int. Symp. TMS. Champion: PA; 1996. p. 129–136.10.7449/1996/Superalloys_1996_129_136 ↗
17. 10.1007/BF0267258710.1007/BF02672587 ↗
18. 10.1007/s11661-004-0185-610.1007/s11661-004-0185-6 ↗
19. 10.1007/s11661-008-9646-710.1007/s11661-008-9646-7 ↗
20. 10.1007/BF0264622310.1007/BF02646223 ↗
21. 10.1016/S0921-5093(01)01758-010.1016/S0921-5093(01)01758-0 ↗
22. MatCalc [Internet]. [cited 2018 Jul 6]. Available from: www.matcalc.at.