Application of texture inheritance on manufacturing ultra-high strength pearlitic steel wire
Source abstract
Abstract
To obtain both ultra-high strength and good ductility in pearlitic steel wires, a new processing technique was proposed following the principle of inherited texture. Microstructure evolution of pearlitic wires was investigated by FE-SEM, EBSD and TEM, and while mechanical properties were determined by tensile and torsional tests. Two types of wires with different ferrite <110> texture intensity were obtained by varying pre-drawing strain. The orientation between ferrite <110> and drawing direction exhibited a great effect on the deformation behaviour of pearlite. For the ferrite <110> parallel to drawing direction, cementite lamellae were straightened and dislocations within ferrite were evenly distributed. However, for the ferrite <110> at an angle to drawing direction, the cementite was bent and the distribution of dislocations within ferrite was uneven. Consequently, pearlitic wires with a higher texture level exhibited an extremely high tensile strength, coupled with a remarkable torsion tolerance. This is part of a thematic issue on Pearlitic Steel Wires.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Jiangsu Key Laboratory of Advanced Metallic Materials, Southeast University, Nanjing, People's Republic of China
Jiangsu Bao Steel Precision Steel Wire Co., Ltd, Nantong, People's Republic of China
Funding
Basic Research Program of Jiangsu Province · National Natural Science Foundation of China · Six Talent Peaks program of Jiangsu Province · Industry-University Strategic Research Fund of Jiangsu Province
References (27)
Show source-provided references
1. 10.1016/S1359-6454(02)00281-110.1016/S1359-6454(02)00281-1 ↗
2. 10.1557/mrs2010.70310.1557/mrs2010.703 ↗
3. 10.1016/S1359-6462(02)00037-410.1016/S1359-6462(02)00037-4 ↗
4. 10.1016/j.actamat.2011.02.01710.1016/j.actamat.2011.02.017 ↗
5. 10.1016/j.msea.2014.04.05010.1016/j.msea.2014.04.050 ↗
6. 10.1016/j.actamat.2011.03.02210.1016/j.actamat.2011.03.022 ↗
7. 10.1016/S1359-6462(01)01185-X10.1016/S1359-6462(01)01185-X ↗
8. 10.1103/PhysRevLett.112.12610310.1103/PhysRevLett.112.126103 ↗
9. 10.1016/S1005-0302(12)60166-210.1016/S1005-0302(12)60166-2 ↗
10. 10.1016/S0921-5093(02)00509-910.1016/S0921-5093(02)00509-9 ↗
11. 10.1016/j.actamat.2013.04.05710.1016/j.actamat.2013.04.057 ↗
12. 10.1016/j.scriptamat.2016.04.00210.1016/j.scriptamat.2016.04.002 ↗
13. 10.1016/j.msea.2012.03.07510.1016/j.msea.2012.03.075 ↗
14. 10.1007/s10853-013-7347-010.1007/s10853-013-7347-0 ↗
15. 10.1103/PhysRevLett.113.10610410.1103/PhysRevLett.113.106104 ↗
16. 10.1016/S1359-6462(01)00956-310.1016/S1359-6462(01)00956-3 ↗
17. 10.1016/j.msea.2014.09.06110.1016/j.msea.2014.09.061 ↗
18. 10.1016/j.matdes.2015.04.03610.1016/j.matdes.2015.04.036 ↗
19. 10.1016/j.surfcoat.2010.01.00510.1016/j.surfcoat.2010.01.005 ↗
20. 10.1016/j.actamat.2012.03.00610.1016/j.actamat.2012.03.006 ↗
21. 10.1016/j.msea.2006.12.16410.1016/j.msea.2006.12.164 ↗
22. 10.1107/S002188980202138610.1107/S0021889802021386 ↗
23. 10.1016/j.actamat.2010.11.01710.1016/j.actamat.2010.11.017 ↗
24. 10.1016/S1359-6462(98)00208-510.1016/S1359-6462(98)00208-5 ↗
25. 10.1016/S0921-5093(00)01904-310.1016/S0921-5093(00)01904-3 ↗
26. 10.3724/SP.J.1037.2012.0074210.3724/SP.J.1037.2012.00742 ↗
27. Xu ZY. · 2000