Effect of viscosity on microstructure characteristic in rheological behaviour of wrought aluminium alloys by compression and stirring process
Source abstract
Abstract
Compression and stirring tests were performed to investigate the rheological behaviour of wrought aluminium alloys with varying processing parameters, such as liquid fraction, strain rate, shear rate and materials. The present paper shows the results of an experimental investigation using Al2024, Al6061 and Al7075. Specimens of each aluminium alloy were characterised by their rheological behaviour during partial melting and holding in the semisolid state. The compression and stirring tests allow the apparent viscosity of the alloys to be determined as a function of the liquid fraction and shear rate. Moreover, the change of grain size and shape was examined by considering shear rate, stirring time and liquid fraction during stirring. These experimental results could be used in flow and solidification analyses and could be useful for manufacturing good rheological products by observing the microstructures according to changes in solid fraction and compression rates.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Metallurgy and Material Forming · Metallurgical Processes and Thermodynamics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Graduate School of Mechanical & Precision EngineeringPusan National University, Pusan 609-735, South Korea
School of Mechanical EngineeringPusan National University, Pusan 609 735, South Korea
Engineering Research Center for Net Shape and Die ManufacturingPusan National University, Pusan 609 735, South Korea
References (14)
Show source-provided references
1. Han D. S., Durrant G., and Cantor B.: Proc. 5th Int. Conf. on ‘Semi-solid processing of alloys and composites’, (ed. A. R. Bhasim et al), Golden, CO, USA, June 1998, 43-50
2. 10.1023/B:JMSC.0000007732.04363.8110.1023/B:JMSC.0000007732.04363.81 ↗
3. Suéry M., and Zavaliangos A.: Proc. 6th Int. Conf. on ‘Semi-solid processing of alloys and composites’, (ed.Chiarmetta G. L., and Rosso M.), Torino, Italy, September 2000,129–135.
4. Fan Z., Ji S., and Fang X.: Proc. 8th Int. Conf. on ‘Semi-solid processing of alloys and composites’, (ed.Alexandrou A., and Apelian D.), Limassol, Cyprus, September 2004,1–10.
5. 10.1016/j.msea.2004.05.00410.1016/j.msea.2004.05.004 ↗
6. 10.1007/BF0265511210.1007/BF02655112 ↗
7. 10.1007/s11661-002-0396-710.1007/s11661-002-0396-7 ↗
8. Gebelin J. C. · Mater. Set Eng. A · 1999 · 272 · 5710.1016/S0921-5093(99)00458-X ↗
9. 10.1016/0921-5093(96)10212-410.1016/0921-5093(96)10212-4 ↗
10. Paes M. · Y. Yoshikawa and R. Yamaguchi: ISIJ Int · 1993 · 33 · 63
11. 10.1007/BF0054087310.1007/BF00540873 ↗
12. Yang Z. · J. Mater. Set Teehol · 2005 · 21 · 1
13. Yang Z. · Metall Trans. A · 2005 · 36 · 200510.1007/s11661-005-0274-1 ↗
14. 10.1016/j.msea.2006.05.07610.1016/j.msea.2006.05.076 ↗