journal article·2021-08Open access

Effects of ablative and non-ablative laser shock peening on AA7075-T651 corrosion and fatigue performance

A. G. Sanchez, M. Leering, D. Glaser, D. Furfari, M. E. Fitzpatrick, J. A. Wharton, P. A. S. Reed

Materials Science and Technology· Volume 37· Issue 12

Abstract

The fatigue performance from pre-corroded pits was studied in laser-shock-peened AA7075-T651 with and without a protective ablation-layer. Surface and microstructural characterisation showed laser-shock-peening generated residual stresses up to −400MPa, limited hardness and moderate surface roughness increase. The laser-shock-peened specimens were exposed to 3.5 wt-% sodium chloride solution for different levels of galvanostatic control. The compressive residual stresses did not significantly affect corrosion behaviour, or corrosion pit morphology. Laser-shock-peening-induced surface roughness had the most detrimental impact on corrosion performance. Fatigue testing of pre-corroded AA7075-T651 showed pits act as stress concentrations. Cracks initiated shortly after dynamic loading, reducing fatigue life by 50%. Laser-shock-peening increased fatigue life by 400% compared to corroded-untreated AA7075-T651, due to residual stresses effectively counteracting stress concentrations produced by pits. Highlights Pre-corroded laser-peened (LSP and LSPwC) AA7075-T651 fatigue performance is investigated. XRD and incremental hole drilling show deeper compressive residual stresses for LSPwC compared to LSP. Electrochemical tests show no significant changes in corrosion behaviour after laser peening. Fatigue testing and fractography show compressive residual stresses effectively counteract stress concentrations at pits.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Surface Treatment and Residual Stress · Erosion and Abrasive Machining · Advanced machining processes and optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Materials Research Group, Faculty of Engineering and Physical Sciences, University of Southampton, Southampton, UK

National Centre for Advanced Tribology at Southampton, Faculty of Engineering and Physical Sciences, University of Southampton, Southampton, UK

Faculty of Engineering, Environment, and Computing, Coventry University, Coventry, UK

National Laser Centre, Council for Scientific and Industrial Research, Pretoria, South Africa

Airbus Operations GmbH, Hamburg, Germany

Funding

Engineering and Physical Sciences Research Council · University of Southampton · Airbus Operations GmbH · Lloyd's Register Foundation

References (69)

Show source-provided references
1. 10.1016/j.matdes.2009.11.02610.1016/j.matdes.2009.11.026 ↗
2. 10.1016/j.actamat.2010.03.02610.1016/j.actamat.2010.03.026 ↗
3. 10.1533/9781845691097.110.1533/9781845691097.1 ↗
4. Fairand BP, Clauer AH. Applications of laser-induced stress waves. In: Lasers in modern industry seminar. Cambridge (MA): Society of Manufacturing Engineers; 1978. [Internet]. [cited 2018 Jun 24]. Available from: https://www.lsptechnologies.com/wp-content/uploads/2008/05/pub1007.pdf
5. Clauer AH, Holbrook JH, Fairand BP. Effects of laser induced shock waves on metals. In: Meyers MA, Murr LE, editors. Shock waves and high-strain-rate phenomena in metals. New York: Plenum; 1981. p. 676–703. [Internet]. [cited 2018 Jun 18]. Available from: https://pdfs.semanticscholar.org/455d/801567d88a167df85a2bc56bae6384c0d345.pdf?_ga=2.12254772.1275154946.1529304832-1115821980.1529304832
6. 10.2961/jlmn.2006.03.000210.2961/jlmn.2006.03.0002 ↗
7. Clauer AH. · Surf Perform Titan · 1996 · 217 · 230
8. 10.2351/1.474541410.2351/1.4745414 ↗
9. Becker A. · 2017
10. 10.1016/j.msea.2011.01.07710.1016/j.msea.2011.01.077 ↗
11. 10.1016/0921-5093(95)10084-910.1016/0921-5093(95)10084-9 ↗
12. 10.1016/j.msea.2012.04.00210.1016/j.msea.2012.04.002 ↗
13. Clauer AH, Walters CT, Ford SC. The effects of laser shock processing on the fatigue properties of 2024-T3 aluminum. ASM Conference on Lasers in Materials Processing; Los Angeles; 1986. p. 7–22. [Internet]. [cited 2020 Apr 3]. Available from: https://www.researchgate.net/publication/283967984_The_Effects_of_Laser_Shock_Processing_on_the_Fatigue_Properties_of_2024-T3_Aluminum
14. 10.1016/j.surfcoat.2018.04.06910.1016/j.surfcoat.2018.04.069 ↗
15. 10.1088/2053-1591/ab0b0e10.1088/2053-1591/ab0b0e ↗
16. Liu Q. An effective life extension technology for 7xxx series aluminium alloys by laser shock peening. Victoria; 2008. [Internet]. [cited 2018 Nov 27]. Available from: http://citeseerx.ist.psu.edu/viewdoc/download?doi=10.1.1.427.4977&rep=rep1&type=pdf
17. Liu Q, Barter S, Clark G. Internal cracking during surface treatment of 7050-T74 aluminium alloy using laser shock peening. Struct. Integr. Fract. Proc. Int. Conf. SIF 2002; Perth, Australia; 2002 Sep 25–28. 177.
18. 10.1016/S0169-4332(02)01369-710.1016/S0169-4332(02)01369-7 ↗
19. 10.4028/www.scientific.net/MSF.589.37910.4028/www.scientific.net/MSF.589.379 ↗
20. 10.1016/j.matdes.2014.09.00110.1016/j.matdes.2014.09.001 ↗
21. 10.1016/j.optlastec.2013.08.01110.1016/j.optlastec.2013.08.011 ↗
22. Trdan U, Ocaña JL, Grum J. Surface modification of aluminium alloys with laser shock processing. J Mech Eng. 2010; 57(5):385–393. [Internet]. [cited 2020 Apr 4]. Available from: https://www.researchgate.net/publication/259216981
23. Ivetic G, Meneghin I, Troiani E Characterisation of fatigue and crack propagation in laser shock peened open hole 7075-T73 aluminium specimens. ICAF 2011 Structural Integrity: Influence of Efficiency and Green Imperatives – Proceedings of the 26th Symposium of the International Committee on Aeronautical Fatigue. Dordrecht: Springer; 2011. p. 855–866.10.1007/978-94-007-1664-3_66 ↗
24. 10.1016/j.ijfatigue.2020.10602510.1016/j.ijfatigue.2020.106025 ↗
25. 10.1016/j.msea.2009.08.04510.1016/j.msea.2009.08.045 ↗
26. 10.1016/j.msea.2007.05.02410.1016/j.msea.2007.05.024 ↗
27. Research and Technology Organisation, North Atlantic Treaty Organisation. Corrosion fatigue and environmentally assisted cracking in aging military vehicles; 2011. [Internet]. Available from: http://www.rto.nato.int/Pubs/rdp.asp?RDP=RTO-AG-AVT-140
28. Brandenburg KA, Hornbach DJ, Mason PW. Use of engineered compressive residual stresses to mitigate stress corrosion cracking and corrosion fatigue in sensitized 5XXX Series aluminum alloys. Proceedings of Department of Defense Virtual Corrosion Conference; Cincinnati; 2013. [Internet]. [cited 2020 Jul 31]. Available from: https://www.lambdatechs.com/wp-content/uploads/287.pdf
29. 10.1016/j.corsci.2012.03.04410.1016/j.corsci.2012.03.044 ↗
30. 10.1016/j.msea.2015.08.08410.1016/j.msea.2015.08.084 ↗
31. 10.1016/j.corsci.2014.10.04510.1016/j.corsci.2014.10.045 ↗
32. 10.1007/s11665-016-2087-310.1007/s11665-016-2087-3 ↗
33. 10.1007/s11665-016-2220-310.1007/s11665-016-2220-3 ↗
34. 10.5006/0010-9312-26.12.54710.5006/0010-9312-26.12.547 ↗
35. 10.1179/00070596879832598410.1179/000705968798325984 ↗
36. 10.1016/j.jmatprotec.2010.03.00410.1016/j.jmatprotec.2010.03.004 ↗
37. 10.1016/j.jallcom.2018.09.14710.1016/j.jallcom.2018.09.147 ↗
38. 10.1016/j.optlaseng.2016.10.01610.1016/j.optlaseng.2016.10.016 ↗
39. 10.1016/j.surfcoat.2014.06.02610.1016/j.surfcoat.2014.06.026 ↗
40. 10.1016/j.ijfatigue.2018.11.01710.1016/j.ijfatigue.2018.11.017 ↗
41. 10.1155/2015/70530610.1155/2015/705306 ↗
42. 10.1016/j.corsci.2012.03.01910.1016/j.corsci.2012.03.019 ↗
43. Zagar S · Tech Gazzette · 2015 · 22 · 1589
44. ASM Aerospace Specification Metals Inc. Aluminium 7075-T6. 7075-T651. MatWeb; 2001. [Internet]. [cited 2020 Jan 3]. Available from: http://asm.matweb.com/search/SpecificMaterial.asp?bassnum=MA7075T6
45. 10.1002/978111840283210.1002/9781118402832 ↗
46. Niknam SA, Songmene V. Deburring and edge finishing of aluminum alloys: A review. Proceedings of the 12th International Aluminum Conference (INALCO); Montreal; 2013. [Internet]. [cited 2020 Jun 18]. Available from: https://www.researchgate.net/publication/263966600_Deburring_and_edge_finishing_of_aluminum_alloys_A_review
47. 10.1016/j.ultramic.2011.08.00210.1016/j.ultramic.2011.08.002 ↗
48. Grant PV · Meas Good Pract Guid · 2006 · 53 · 63
49. 10.1038/nmeth.201910.1038/nmeth.2019 ↗
50. 10.1111/j.1460-2695.2008.01322.x10.1111/j.1460-2695.2008.01322.x ↗
51. 10.1016/j.ijfatigue.2007.07.00510.1016/j.ijfatigue.2007.07.005 ↗
52. 10.1023/A:101797343259210.1023/A:1017973432592 ↗
53. 10.1038/s41598-018-29315-810.1038/s41598-018-29315-8 ↗
54. Mhaede M · Proc Shot Peen ICS · 2011 · 11 · 2
55. 10.1016/j.msea.2017.08.05010.1016/j.msea.2017.08.050 ↗
56. 10.5545/sv-jme.2010.14210.5545/sv-jme.2010.142 ↗
57. 10.1016/j.jallcom.2017.06.31010.1016/j.jallcom.2017.06.310 ↗
58. 10.1243/03093247V19213510.1243/03093247V192135 ↗
59. 10.1557/JMR.1996.009110.1557/JMR.1996.0091 ↗
60. 10.1016/j.commatsci.2011.05.01510.1016/j.commatsci.2011.05.015 ↗
61. 10.1016/j.actamat.2011.08.03410.1016/j.actamat.2011.08.034 ↗
62. 10.1016/j.corsci.2014.01.03210.1016/j.corsci.2014.01.032 ↗
63. 10.1016/j.corsci.2005.12.00310.1016/j.corsci.2005.12.003 ↗
64. Elkandari BMHM. Excimer laser surface melting treatment on 7075-T6 aluminium alloy for improved corrosion resistance. University of Manchester; 2012. [Internet]. [cited 2018 Jun 6]. Available from: https://www.escholar.manchester.ac.uk/api/datastream?publicationPid=uk-ac-man-scw:189196&datastreamId=FULL-TEXT.PDF
65. 10.1023/A:102449892210410.1023/A:1024498922104 ↗
66. 10.1016/j.matchar.2012.08.01110.1016/j.matchar.2012.08.011 ↗
67. 10.1016/j.electacta.2010.09.02310.1016/j.electacta.2010.09.023 ↗
68. 10.1016/j.corsci.2006.02.00710.1016/j.corsci.2006.02.007 ↗
69. 10.1149/1.186998410.1149/1.1869984 ↗