journal article·2015-03

Effect of post-quench delay on stress relieving by cold compression for the aluminium alloy 7050

J. S. Robinson, P. J. Tiernan, J. F. Kelleher

Materials Science and Technology· Volume 31· Issue 4
Publisher page

Abstract

The objective of this investigation was to determine the influence of post-quench delays on residual stresses in the heat treatable aluminium alloy 7050, when stress relieved by cold compression. Immersion quenching after solution heat treatment introduces high magnitude residual stresses. These residual stresses can be relieved by the controlled application of post-quench plastic deformation. The effect of a delay between quenching and the application of cold compression has been investigated. During this delay, the aluminium alloy undergoes natural aging, which changes the workhardening behaviour of the alloy during subsequent cold compression. Neutron and X-ray diffraction were used to characterise the residual stresses. It was found that reducing the post-quench delay resulted in lower magnitude residual stresses after cold compression.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Welding Techniques and Residual Stresses · Non-Destructive Testing Techniques · Advanced Welding Techniques Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical Aeronautical and Biomedical Engineering, University of Limerick, Ireland

Department of Design and Manufacturing Technology and Materials and Surface Science Institute University of Limerick, Ireland

ISIS Facility Rutherford Appleton Laboratory, Didcot, UK

References (39)

Show source-provided references
1. 10.1115/1.282335210.1115/1.2823352 ↗
2. 10.1179/02670830110151008710.1179/026708301101510087 ↗
3. 10.4028/www.scientific.net/MSF.654-656.93410.4028/www.scientific.net/MSF.654-656.934 ↗
4. Staley JT · 1996 · 1587
5. Myer RT · Met. Prog. · 1959 · 3 · 112
6. Kleint RE · Light Met. Age · 1958 · 2 · 14
7. Faulkner JF: ‘ALCOA stress relieved forgings’, Aluminium Company of America – Sales Division, Cleveland, OH, USA, 1963.
8. Klein J · Prec. Met. Mold. · 1967 · 6 · 53
9. 10.1016/S1359-6462(01)01201-510.1016/S1359-6462(01)01201-5 ↗
10. Betteridge W: ‘The relief of internal stresses in aluminum alloys by cold working’, Proc. Symp. on ‘Internal stresses in metals and alloys’, London, UK, October 1947, Institute of Metals, 171–177.
11. Bains T: ‘Residual stress reduction in aluminum die forgings’, Proc. 1st Int. Non-Ferrous Processing and Technology Conf., St Louis, MO, USA, March 1997, ASM International, 221–231.
12. 10.1243/PIME_PROC_1959_173_018_0210.1243/PIME_PROC_1959_173_018_02 ↗
13. Robinson JS · Adv. X-ray Anal. · 2009 · 52 · 667
14. Lin GY · Trans. Nonferrous Met. Soc. China · 2003 · 13 · 641
15. 10.1520/STP26357S10.1520/STP26357S ↗
16. Vohringer O · 1987 · 367
17. 10.1108/0002266011038666310.1108/00022660110386663 ↗
18. van der Veen S, Heymes F, Boselli J, Lequeu P and Lassince P: ‘Low internal stress Al–Zn–Cu–Mg plates’, US Patent 20060151075 A1, USA, 2006.
19. 10.1520/JAI10161210.1520/JAI101612 ↗
20. Sim WM · Int. J. Microstruct. Mater. Propert. · 2010 · 5 · 446
21. Dieter GE · 2003 · 64
22. 10.1179/02670830110150998010.1179/026708301101509980 ↗
23. Fitzpatrick ME, Fry AT, Holdway P, Kandil FA, Shackleton J and Suominen L: ‘Determination of residual stresses by X-ray diffraction’, Measurement Good Practice Guide No. 52, NPL, Teddington, UK, 2002.
24. Noyan IC and Cohen JB: ‘Residual stress [measurement by diffraction and interpretation]’; 1987, New York, Springer-Verlag.10.1007/978-1-4613-9570-6 ↗
25. Hauk VM · Adv. X-ray Anal. · 1983 · 27 · 81
26. Cullity BD and StockSR: ‘Elements of X-ray diffraction’; 2001, Upper Saddle River, NJ, Prentice Hall.
27. ‘Polycrystalline materials – Determination of residual stresses by neutron diffraction’, ISO/TTA3, ISO, Geneva, Switzerland, 2001.
28. ‘Non-destructive testing. Standard test method for determining of residual stresses by neutron diffraction’, DD CEN ISO/TS 21432, British Standards Institute, London, UK, 2005.
29. 10.1179/1743284710Y.000000002910.1179/1743284710Y.0000000029 ↗
30. 10.1107/S002188988100961810.1107/S0021889881009618 ↗
31. Hutchings MT, Withers PJ, Holden TM and Lorentzen T: ‘Introduction to the characterisation of residual stress by neutron diffraction’, 424; 2005, Boca Raton, FL, CRC Press.10.1201/9780203402818 ↗
32. ‘Standard methods of tension testing wrought and cast aluminium and magnesium alloy products’, ASTM B557-84, ASTM International, Philadelphia, PA, USA, 1992, 443.
33. ‘Standard test method for Vickers hardness of metallic materials’, ASTM International, Philadelphia, PA, USA, 1992.
34. Martin JW: ‘Precipitation hardening: theory and applications’; 1998, Oxford, Butterworth-Heinemann.
35. 10.1016/0001-6160(87)90001-010.1016/0001-6160(87)90001-0 ↗
36. 10.1007/978-1-4614-0225-1_910.1007/978-1-4614-0225-1_9 ↗
37. 10.1520/STP26356S10.1520/STP26356S ↗
38. Wang QC · Trans. Nonferrous Met. Soc. China · 2003 · 13 · 1190
39. Prime MB · 2003 · 426 · 435