journal article·2009-01

Effects of heat treatment processes on microstructure and properties of 2·25Cr–1Mo–0·25V HSLA steels

R. D. Fu, S. F. Wu, W. H. Zhou, W. H. Zhang, Y. Q. Yang, F. C. Zhang

Materials Science and Technology· Volume 25· Issue 1
Publisher page

Abstract

In the present paper, the effects of the heat treatment processes with two conditioning treatments and four quenching–tempering processes on the mechanical properties of 2·25Cr–1Mo–0·25V high strength low alloyed (HSLA) steel are investigated. The results show that the conditioning treatments have obvious effects on the low temperature impact energy but little effect on the tensile strength. The elevation of the final austenitising temperature increases the strength, whereas it results in the decrease in the low temperature impact energy due to the coarse microstructure. The results of the fracture surfaces analysis further make sure that the fracture surfaces of tensile specimens all exhibit ductile characters with a lot of dimples. However, the fracture surfaces of impact specimens exhibit two typical fracture characters, i.e. the ductile and brittle fracture surface corresponding to the fine and coarse microstructures respectively. In addition, the elongation and reduction in area seem to be insensitive to the heat treatments. Meanwhile, the impact fracture mode is more sensitive to the grain size and not to the low temperature impact energy.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · High Temperature Alloys and Creep · Fatigue and fracture mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (8)

Show source-provided references
1. American Petroleum Institute: ‘Steels for hydrogen service at elevated temperatures and pressures in petroleum refineries and petrochemical plants’, 5th edn; 1997, Washington, API.
2. 10.1016/S1359-6462(02)00567-510.1016/S1359-6462(02)00567-5 ↗
3. 10.1016/S0167-577X(02)00440-810.1016/S0167-577X(02)00440-8 ↗
4. Haiwen L.: ISIJ Int. 2002, 42, (3), 273–282.10.2355/isijinternational.42.273 ↗
5. 10.1016/S1359-6454(97)00238-310.1016/S1359-6454(97)00238-3 ↗
6. 10.1179/02670830322500597110.1179/026708303225005971 ↗
7. 10.1016/S1359-6462(00)00617-510.1016/S1359-6462(00)00617-5 ↗
8. Carven A. J., He K., and Baker T. N.: Acta Mater. 2000, 48, 3857–3868.10.1016/S1359-6454(00)00194-4 ↗