Integral and layered mechanical properties of friction stir welded joints of 2014 aluminium alloy
Source abstract
Abstract
Eight millimetre thick 2014-T6 Al alloy has been successfully friction stir welded. The experimental results showed that the weld tensile strength differs at different welding parameters. The maximum ultimate tensile strength, which equals to 78% that of base metal, was obtained at a rotating speed of 400 rev min−1 and welding speed of 100 mm min−1. For a specific welded joint, different region of the joint has different tensile strength, which depends on the microstructure variation and microhardness distribution. This is attributed to different thermomechanical actions on different regions of the joints. For the joint with three layers and without defects, the mechanical properties of middle layer are the weakest while the upper layer is the strongest. For the joints with crack or void defect, the position of the defect will be the source of fracture.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. Biallas G., Braun R., Donne C. D., Staniek G., and Kaysser W. A.: Proc. 1st Int. Symp. on ‘Friction stir welding’, CA, USA, June 1999, TWI, Paper 53-P3.
2. Magnusson L., and Kallman L.: Proc. 2nd Int. Symp. on ‘Friction stir welding’, Gothenburg, Sweden, June 2000, TWI and IVF, Paper 52-P3.
3. Strombeck A. V., Santos J. F. D., Torster F., Laureano P., and Kocak M.: Proc. 1st Int. Symp. on ‘Friction stir welding’, California, USA, June 1999, TWI, Paper S9- P1.
4. Bussu G., and Irving P. E.: Proc. 1st Int. Symp. on ‘Friction stir welding’, CA, USA, June 1999, TWI Ltd, Paper S3-P1.
5. 10.1016/S1359-6462(99)00226-210.1016/S1359-6462(99)00226-2 ↗
6. Hashimoto T., Jyogan S., Nakada K., Kim Y. G., and Ushio M.: Proc. 1st Int. Symp. on ‘Friction stir welding’, CA, USA, June 1999, TWI, Paper 59-P3.
7. Chant I. · Mater. Sci. Eng. A · 2003 · 359 · 29010.1016/S0921-5093(03)00367-8 ↗
8. 10.1016/j.scriptamat.2004.12.02710.1016/j.scriptamat.2004.12.027 ↗
9. Kinchen D. G., Li Z. X., and Adams G. P.: Proc. 1st Int. Symp. on ‘Friction stir welding’, CA, USA, June 1999, TWI Ltd, Paper S9- P2.
10. 10.1007/s11661-001-1038-110.1007/s11661-001-1038-1 ↗
11. 10.2207/qjjws.19.44610.2207/qjjws.19.446 ↗
12. Kumagai M., and Tanaka S.: Proc. 1st Int. Symp. on ‘Friction stir welding’, CA, USA, June 1999, TWI, Paper 53-P2.
13. 10.1016/S1359-6462(97)00093-610.1016/S1359-6462(97)00093-6 ↗
14. Nagano Y., Jogan S., and Hashimoto T.: Proc. 3rd Int. Symp. on ‘Friction stir welding’, Kobe, Japan, September 2001, TWI Ltd, Paper Post-12.
15. 10.1016/S0890-6955(03)00130-510.1016/S0890-6955(03)00130-5 ↗
16. 10.1016/j.ijmachtools.2004.03.01110.1016/j.ijmachtools.2004.03.011 ↗
17. 10.1023/A:102497042108210.1023/A:1024970421082 ↗
18. 10.1007/s11661-998-0021-510.1007/s11661-998-0021-5 ↗
19. 10.1016/j.msea.2004.12.01610.1016/j.msea.2004.12.016 ↗
20. 10.1016/S1359-6462(99)00329-210.1016/S1359-6462(99)00329-2 ↗
21. Dawes M. G., Karger S. A., Dickerson T. L., and Przyoatek J.: Proc. 2nd Int. Symp. on ‘Friction stir welding’, Gothenburg, Sweden, June 2000, TWI and IVF, Paper 52-Pi.
22. 10.1023/A:102295962779410.1023/A:1022959627794 ↗