Mechanical characteristics and bioactivity of porous Ni 50− x Ti 50 Cu x ( x = 0, 5 and 10) prepared by P/M
Source abstract
Abstract
The present research work investigates and analyses the effect of compaction pressure, sintering temperature and time on mechanical characteristics, namely compressive strength and Young's modulus of Ni 50− x Ti 50 Cu x ( x = 0, 5 and 10) alloys fabricated using powder metallurgy technology. The effect of process parameters on mechanical characteristics was evaluated using the Taguchi method and analysis of variance. Using the Taguchi approach, optimised values of process parameters were found for higher compressive strength and lower Young's modulus in each set of Ni 50 Ti 50 , Ni 45 Ti 50 Cu 5 and Ni 40 Ti 50 Cu 10 alloys. With the addition of copper in NiTi alloy, a little improvement in mechanical characteristics was observed, but bioactivity was decreased at 10%of Cu. Therefore, above 5% of Cu in NiTi alloy was not proved successful for biomedical applications.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Shape Memory Alloy Transformations · High Entropy Alloys Studies · Titanium Alloys Microstructure and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Mechanical Engineering, Maharishi Markandeshwar University, Mullana, India
Department of Mechanical Engineering, Punjab Engineering College, Chandigarh, India
References (39)
Show source-provided references
1. 10.1023/A:100895341262210.1023/A:1008953412622 ↗
2. 10.4103/0976-8580.14947210.4103/0976-8580.149472 ↗
3. 10.1177/146442071562249410.1177/1464420715622494 ↗
4. 10.1016/j.pmatsci.2011.11.00110.1016/j.pmatsci.2011.11.001 ↗
5. 10.1016/j.jallcom.2017.01.19610.1016/j.jallcom.2017.01.196 ↗
6. 10.1016/j.pmatsci.2008.06.00410.1016/j.pmatsci.2008.06.004 ↗
7. 10.1002/adem.20040515110.1002/adem.200405151 ↗
8. 10.1016/j.biomaterials.2005.12.00210.1016/j.biomaterials.2005.12.002 ↗
9. 10.1016/j.matdes.2013.11.08410.1016/j.matdes.2013.11.084 ↗
10. Morgan NB · 2003 · 247
11. 10.1179/1743290115Y.000000000510.1179/1743290115Y.0000000005 ↗
12. 10.3390/ma703170910.3390/ma7031709 ↗
13. 10.1016/j.actamat.2004.09.02910.1016/j.actamat.2004.09.029 ↗
14. 10.1016/S1359-6454(00)00184-110.1016/S1359-6454(00)00184-1 ↗
15. Kaya M · Mater Sci Technol · 2009 · 25 · 69910.1179/174328408X317075 ↗
16. 10.1016/j.jallcom.2015.05.00610.1016/j.jallcom.2015.05.006 ↗
17. 10.1016/j.msec.2014.10.05310.1016/j.msec.2014.10.053 ↗
18. 10.1080/10426914.2015.100471010.1080/10426914.2015.1004710 ↗
19. 10.1155/2015/47543510.1155/2015/475435 ↗
20. Jangra K · Int J Ind Eng Comp · 2011 · 2 · 479
21. Roy RK. · 2001
22. 10.1016/j.intermet.2014.08.00910.1016/j.intermet.2014.08.009 ↗
23. 10.1007/s10845-016-1236-810.1007/s10845-016-1236-8 ↗
24. 10.1016/j.jmbbm.2007.09.00310.1016/j.jmbbm.2007.09.003 ↗
25. 10.3390/ma305294710.3390/ma3052947 ↗
26. Wers E · Bioceram Dev Appl · 2013 · 1 · 1
27. Reinoehl M · Proceedings of international conference on shape memory and superelasticity technologies
28. 10.1016/j.jallcom.2004.05.00210.1016/j.jallcom.2004.05.002 ↗
29. 10.1557/JMR.1998.038910.1557/JMR.1998.0389 ↗
30. Upadhyaya GS. Powder metallurgy technology. Cambridge, UK: Cambridge International Science Publishing; 2002. p. 68–117
31. 10.1016/j.matchemphys.2015.02.00710.1016/j.matchemphys.2015.02.007 ↗
32. 10.1007/s11665-012-0264-610.1007/s11665-012-0264-6 ↗
33. 10.1016/j.matlet.2011.12.00810.1016/j.matlet.2011.12.008 ↗
34. Li J · Mater Sci – Poland · 2007 · 25 · 699
35. Dobedoe RS · Bull Eur Ceram Soc · 2003 · 1 · 19
36. 10.3390/ma203079010.3390/ma2030790 ↗
37. EyersDR, Dotchev KD. Rapid manufacturing for mass customization; 6 July-17 July 2009; Cardiff University, Wales): IPROMS 2009 conference
38. 10.1007/978-1-4419-1120-910.1007/978-1-4419-1120-9 ↗
39. 10.1016/j.cirp.2007.10.00410.1016/j.cirp.2007.10.004 ↗