journal article·2016-09

Prediction of welding stresses in WIC test and its application in pipelines

H. Alipooramirabad, A. M. Paradowska, R. Ghomashchi, A. Kotousov, N. Hoye

Materials Science and Technology· Volume 32· Issue 14
Publisher page

Abstract

In the present study, the Welding Institute of Canada (WIC) restraint test was used to simulate the restraint conditions of full-scale girth welds on energy pipelines to ascertain the influence of welding process parameters on welding stresses. Finite element models are developed, and validated with neutron diffraction measurements, to evaluate the welding stresses for under-matched, matched and over-matched welds. The effects of heat input, wall thickness and variable restraint lengths of WIC sample are systematically investigated. As a practical outcome, this work can help in selection of the appropriate restraint length for WIC tests to simulate the specified stress conditions in the pipeline, and, ultimately, reduce the risk of Hydrogen Assisted Cold Cracking (HACC) in high strength low alloy. This paper is part of a Themed Issue on Measurement, modelling and mitigation of residual stress.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Welding Techniques and Residual Stresses · Hydrogen embrittlement and corrosion behaviors in metals · Non-Destructive Testing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Mechanical Engineering Department, University of Adelaide, Adelaide, Australia

Australian Nuclear Science and Technology Organisation (ANSTO), Lucas Heights, Australia

University of Wollongong, Wollongong, Australia

Funding

Energy Pipelines CRC,

References (28)

Show source-provided references
1. Kotousov A., Borkowski K., Fletcher L., and Ghomashchi R. ‘A model of hydrogen assisted cold cracking in weld metal’, 9th International Pipeline Conference: American Society of Mechanical Engineers, 2012, 329–334.10.1115/IPC2012-90385 ↗
2. 10.1016/j.matchar.2015.07.03210.1016/j.matchar.2015.07.032 ↗
3. 10.1016/j.matchar.2007.08.01510.1016/j.matchar.2007.08.015 ↗
4. Kurji R., Griggs J., Linton V., Kotooussov A., Gamboa E., Ghomashchi R., and Coniglio N. ‘An improved Welding Institute of Canada test for evaluation of high-strength pipeline steel weldability’, International Pipeline Technology Conference (06 Oct 2013–09 Oct 2013: Ostend) 2013.
5. Suzuki H. · Transactions of the Japan Welding Society · 1982 · 13 · 3
6. 10.1016/j.jmatprotec.2006.12.01210.1016/j.jmatprotec.2006.12.012 ↗
7. Glover A., and Rothwell B.: Specifications and practices for hydrogen crack avoidance in pipeline girth welds. First International Conference on Weld Metal Hydrogen Cracking in Pipeline Girth Welds, Wollongong, Australia1999. p. 13.1–0.8.
8. 10.1179/imr.1990.35.1.21710.1179/imr.1990.35.1.217 ↗
9. Graville B. A. ‘Interpretive report on weldability tests for hydrogen cracking of higher strength steels and their potential for standardization’, 1995, WRC Bulletin, available at https://forengineers.org/bulletin/wrc-400.
10. Alam N., Dunne D., and Barbaro F.: Weld metal crack testing for high strength cellulosic electrodes. First International Conference on Weld Metal Hydrogen Cracking in Pipeline Girth Welds, Wollongong, Australia1999. p. 9.1–9.23.
11. Signes E. · Weld J. · 1988 · 67 · 1635
12. North T. · Weld J. · 1982 · 61 · 243
13. Yurioka N.: Predictive methods for prevention and control of hydrogen assisted cold cracking, IIW Doc. IX-1938–99; 1999.
14. 10.1016/j.commatsci.2005.07.00710.1016/j.commatsci.2005.07.007 ↗
15. Ueda Y. · 2012
16. 10.1080/0149573015050044210.1080/01495730150500442 ↗
17. 10.1016/j.matdes.2012.12.06410.1016/j.matdes.2012.12.064 ↗
18. 10.1016/j.commatsci.2013.11.00710.1016/j.commatsci.2013.11.007 ↗
19. 10.1016/j.applthermaleng.2012.04.00710.1016/j.applthermaleng.2012.04.007 ↗
20. 10.1016/S0921-5093(97)00729-610.1016/S0921-5093(97)00729-6 ↗
21. 10.1016/j.commatsci.2007.07.00910.1016/j.commatsci.2007.07.009 ↗
22. 10.1016/j.matdes.2014.10.01910.1016/j.matdes.2014.10.019 ↗
23. 10.1016/j.jmatprotec.2006.10.01310.1016/j.jmatprotec.2006.10.013 ↗
24. 10.1016/j.matdes.2012.03.01010.1016/j.matdes.2012.03.010 ↗
25. 10.1016/j.jmatprotec.2015.07.00210.1016/j.jmatprotec.2015.07.002 ↗
26. 10.1016/j.jmatprotec.2016.01.02010.1016/j.jmatprotec.2016.01.020 ↗
27. Swanson Analysis Systems. ANSYS Version14.5. 2012.
28. Singh R.: Weld cracking in ferrous alloys: London, Elsevier; 2008.10.1533/9781845695453 ↗