Effect of hot rolling on microstructure and transformation cycling behaviour of equiatomic NiTi shape memory alloy
Source abstract
Abstract
In this study, a near equiatomic NiTi shape memory alloy was hot rolled at 800°C using the thickness reductions of 30 and 50. Optical and transmission electron microscopy, together with X-ray diffraction were used to demonstrate the microstructural changes associated with the hot rolling at different thickness reductions. Repeated transformation cycling was employed to investigate the evolution of R phase during cycling. Microstructural observations revealed the presence of deformation twins embedded in an elongated grain matrix in the hot rolled material. Moreover, it was found that with increasing degree of thickness reduction, the size and number of deformation twins increased throughout the grains. After transformation cycling, higher values of Δ HA→R were noticed in the 50 hot rolled material in comparison to the annealed condition. Transmission electron microscopy microstructure of the 50 hot rolled material transformation cycled up to 50 cycles showed that R phase packets are frequently observed near grain boundaries. The observation of R phase packets near the grain boundaries in the hot rolled material was attributed to the high stress concentrations at these regions.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Shape Memory Alloy Transformations · Titanium Alloys Microstructure and Properties · Magnetic and transport properties of perovskites and related materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Materials Science and Engineering Sharif University of Technology, Azadi Avenue, Tehran, Iran
References (25)
Show source-provided references
1. Otsuka K, Wayman CM: ‘Shape memory materials’; 1999, Cambridge, Cambridge University Press.
2. 10.1016/S1359-6454(00)00129-410.1016/S1359-6454(00)00129-4 ↗
3. 10.1016/S1359-6454(98)00325-510.1016/S1359-6454(98)00325-5 ↗
4. 10.1016/j.jallcom.2004.03.10810.1016/j.jallcom.2004.03.108 ↗
5. 10.1016/S1359-6462(01)00740-010.1016/S1359-6462(01)00740-0 ↗
6. 10.4028/www.scientific.net/MSF.394-395.28510.4028/www.scientific.net/MSF.394-395.285 ↗
7. 10.1007/s11661-004-0150-410.1007/s11661-004-0150-4 ↗
8. 10.1016/j.msea.2009.04.05710.1016/j.msea.2009.04.057 ↗
9. 10.1016/j.actamat.2008.04.00110.1016/j.actamat.2008.04.001 ↗
10. 10.1016/j.msea.2007.11.03310.1016/j.msea.2007.11.033 ↗
11. 10.1016/0921-5093(92)90138-Q10.1016/0921-5093(92)90138-Q ↗
12. 10.1023/A:100456321656710.1023/A:1004563216567 ↗
13. Erhard H · Mater. Sci. Eng. A · 1999 · 273 · 630
14. 10.1007/s11661-010-0338-810.1007/s11661-010-0338-8 ↗
15. Yaney DL: ”Mechanisms of elevated temperature deformation in selected aluminum alloys and related intermetallic compounds„, PhD thesis, Stanford University, CA, USA, 1986.
16. 10.1361/10599490177034459310.1361/105994901770344593 ↗
17. 10.1016/j.msea.2004.08.04510.1016/j.msea.2004.08.045 ↗
18. 10.1016/j.msea.2006.12.22110.1016/j.msea.2006.12.221 ↗
19. Cullity BD, StockSR: ‘Elements of X-ray diffraction’; 2001, Upper Saddle River, NJ, Prentice-Hall Inc.
20. Mackenzie DS, Totten GE: ‘Analytical characterization of aluminum, steel, and superalloys’; 2006, Boca Raton, FL, Taylor & Francis.10.1201/9781420030365 ↗
21. Beyer J · J. Phys. IV · 1995 · 5 · 433
22. 10.1016/S0925-8388(99)00576-910.1016/S0925-8388(99)00576-9 ↗
23. 10.1088/0305-4608/14/8/02710.1088/0305-4608/14/8/027 ↗
24. 10.1007/s11661-001-1007-810.1007/s11661-001-1007-8 ↗
25. 10.2320/matertrans1989.33.27110.2320/matertrans1989.33.271 ↗