journal article·2008-04

Effect of extrusion parameters on microstructure and mechanical properties of ZK30 Mg Alloy

Govind, K. S. Nair, M. C. Mittal, R. Sikand, A. K. Gupta

Materials Science and Technology· Volume 24· Issue 4
Publisher page

Abstract

Mg alloys are the lightest structural metallic materials, and are very attractive for aerospace applications. But their applications are limited owing to their poor workability, moderate strength and poor corrosion resistance. ZK30 Mg alloy (Mg–3·0Zn–0·5Zr (wt-%)) shows better strength and workability due to the presence of fine grains than conventional Mg–Al–Zn base wrought alloys. In the present study homogenised billets of this alloy were extruded into square tubes at various temperatures and ram speeds to determine the regime of uniform deformation and best mechanical properties. Material exhibited dynamic recrystallisation under all the conditions studied. Increase in the extrusion temperature improves the homogeneity of deformation but further increase in temperature (>400°C) causes abnormal grain growth. Increase in ram speed is also found to enhance uniform deformation but further increase in ram speed (>8 mm s−1) causes adiabatic heating and flow localisation. Based on the findings of the present study, an optimum process parameter regime was finalised for homogeneous deformation and best mechanical properties.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Hydrogen Storage and Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. Emley E. F. ‘Principles of magnesium technology’; 1966, London, Pergamon Press.
2. Evans G. B.: Proc. Conf. on ‘Magnesium technology: application of magnesium in aerospace’, 103; 1986, London, Institute of Metals.
3. 10.1179/mst.1994.10.1.110.1179/mst.1994.10.1.1 ↗
4. 10.4028/www.scientific.net/MSF.419-422.23110.4028/www.scientific.net/MSF.419-422.231 ↗
5. Roberts C. S. · Trans. ASM · 1955 · 47 · 130
6. Hauser F. E. · Trans. ASM · 1959 · 51 · 94
7. 10.1016/S1359-6454(03)00005-310.1016/S1359-6454(03)00005-3 ↗
8. 10.2320/matertrans.44.44510.2320/matertrans.44.445 ↗
9. 10.1016/j.msea.2006.05.15910.1016/j.msea.2006.05.159 ↗
10. 10.1016/S0921-5093(04)00942-610.1016/S0921-5093(04)00942-6 ↗
11. McDonald J. R. · Trans. Metall Soc. AIME · 1958 · 212 · 45
12. 10.1016/0956-7151(93)90130-K10.1016/0956-7151(93)90130-K ↗
13. 10.2320/jinstmet1952.67.4_14910.2320/jinstmet1952.67.4_149 ↗
14. Neite G., Kubota K., Higashi K., and Hehmann F.: in ‘Structure and properties of nonferrous alloys’, (ed.Cahn R. W.), Vol. 8, ‘Materials science and technology: a comprehensive treatment’, 113; 1996, New York, VCH Publishers Inc.
15. 10.1016/S1359-6462(01)00996-410.1016/S1359-6462(01)00996-4 ↗
16. Pearson C. F., and Parkins R. ‘Extrusion of metals’; 1961, London, Chapman & Hall.
17. 10.1016/j.msea.2005.01.00210.1016/j.msea.2005.01.002 ↗
18. 10.1007/BF0264839310.1007/BF02648393 ↗
19. 10.1080/1478643630821384310.1080/14786436308213843 ↗
20. Flynn P. W. · Trans. Met. Soc. AIME · 1961 · 221 · 1148
21. 10.1016/j.jmatprotec.2006.12.03310.1016/j.jmatprotec.2006.12.033 ↗
22. Ion S. E. · Metall · 1982 · 9
23. 10.1016/S0921-5093(02)00096-510.1016/S0921-5093(02)00096-5 ↗
24. 10.1016/S1359-6462(01)01212-X10.1016/S1359-6462(01)01212-X ↗
25. Prasad Y. V. R. K., and Sasidhara S. (eds.): in ‘Hot working guide:
26. Dieter G. E. ‘Mechanical metallurgy’: 1988, London, McGraw-Hill.a compendium of processing maps’, 343-381; 1997, Materials Park, OH, AMS International.
27. 10.1016/j.actamat.2006.05.01810.1016/j.actamat.2006.05.018 ↗