journal article·2011-07

Development of high strength hot rolled steel sheet for wheel disc application

G Jha, A Haldar, M S Bhaskar, T Venugopalan

Materials Science and Technology· Volume 27· Issue 7
Publisher page

Abstract

A hot rolled steel with unique combination of high strength and excellent ductility coupled with high hole expansion ratio has been developed for automotive applications using a new metallurgical approach. The steel chemistry and processing parameters were designed in such a way that austenite–ferrite phase transformation takes place at lower temperature with interphase precipitation of very fine carbides. A fine ferritic microstructure was produced with an average grain size of 3·4 μm resulting into attractive mechanical properties. Interphase precipitation was used as one of the major strengthening mechanisms apart from grain refinement. This led to an achievement of tensile strength as high as 800 MPa (min.) with an excellent stretch formability and low impact transition temperature. This is a potential grade with unique features which can have wider applications.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Research and Development Tata Steel Limited, Jamshedpur 831001, India

References (23)

Show source-provided references
1. Sellars CM: ‘Option and constraints for thermomechanical processing of microalloyed steels’, in ‘HSLA steels, metallurgy and application’, Gray J. M., et al., 73–81; 1985, Materials Park, OH, ASM International.
2. Cohen M, Hansen SS: ‘On the fundamentals of HSLA steels’, in ‘HSLA steels, metallurgy and application’, Gray J. M., et al., 61–71; 1985, Materials Park, OH, ASM International.
3. Hasegawa K, Kawamura K, Urabe T, Hosoya Y: ‘Effects of microstructure on stretch-flange-formability of cold-rolled ultra high strength steels’, Proc. 45th MWSP Conf. Vol. XLI; 2003, Warrendale, PA, Iron & Steel Society.
4. Nishimoto A, Hosoya Y, Nakaoka K: ‘Relation between hole expansion formability and metallurgical factors in dual-phase steel sheet’, in ‘Fundamentals of dual-phase steels’, Kot R. A., Bramfitt B. L., 447–463; 1981, Warrendale, PA, The Metallurgical Society of AIME.
5. Hayashi H · J. Jpn Soc. Technol. Plast. · 1999 · 40 · 87
6. Haji J · CAMP-ISIJ · 1993 · 6 · 1698
7. 10.1179/03063456879044334110.1179/030634568790443341 ↗
8. Davenport AT · Proc. R. Soc. Lond. A · 1971 · 322 · 19110.1098/rspa.1971.0063 ↗
9. 10.1179/msc.1977.11.2.5910.1179/msc.1977.11.2.59 ↗
10. Wilyman PR, Honeycombe RWK: Met. Sci., 16, 1982, 255–303.10.1179/030634582790427398 ↗
11. 10.1179/mst.1993.9.5.38410.1179/mst.1993.9.5.384 ↗
12. 10.1179/026708306X8148710.1179/026708306X81487 ↗
13. Pickering FB: ‘Physical metallurgy and the design of steels’, 63; 1978, London, Applied Science Publishing Ltd.
14. Gladman T, Dulieu D, McIvor ID: Proc. Conf. Microalloying ‘75, 32; 1976, New York, Union Carbide Corp.
15. Kunishige K · Sumitomo Met. · 1979 · 31 · 290
16. Nakahara T, Funakawa Y, Inazumi T, Hosoya Y: Proc. Int. Conf. on ‘Thermomechanical processing of steels’, 39; 2000, London, IOM Communications Ltd.
17. 10.1179/mst.1988.4.8.71910.1179/mst.1988.4.8.719 ↗
18. Deveport AT · Proc. R. Soc. Lond. A · 1971 · 322 · 19110.1098/rspa.1971.0063 ↗
19. Tetsuo S, Yoshimasa F, Shinjiro K: ‘High strength steel sheets for automobile suspension and chassis use – high strength hot-rolled steel sheets with excellent press formability and durability for critical safety parts’, JFE Technical Report No. 4, JFE Steel Co., Tokyo, Japan, 2004.
20. Kawano O · Seitetsu Kenkyu · 1988 · 15
21. Morita M · Kawasaki Steel Giho · 1995 · 27 · 182
22. Kashima T · Kobe Steel Eng. Rep. · 2000 · 50 · 75
23. Kinoshita M · NKK Tech. Rep. · 1994 · 1