journal article·2017-10

Reactive friction-stir processing of nanocomposites: Effects of thermal history on microstructure–mechanical property relationships

F. Khodabakhshi, A. H. Kokabi, A. Simchi

Materials Science and Technology· Volume 33· Issue 15
Publisher page

Abstract

The effects of thermal history on the microstructure and mechanical properties of a friction-stir-processed Al–Mg–TiO 2 (3 vol.-%, 20 nm) nanocomposite were studied. It is shown that, with increases in peak temperature, a more uniform distribution of nanoparticles in the metal matrix, and a refined grain structure, are attained. Transmission electron microscopy indicated that the mechanism of grain refinement is influenced by the hard inclusions, changing from discontinuous to continuous dynamic recrystallisation. A fine-grained nanocomposite (average grain size of 3 µm) with a uniform distribution of nanoparticles is obtained after four fully-overlapping passes at 1200 rev min −1 and 100 mm min −1 . Under these circumstances the mechanical properties, including yield stress (95%), tensile strength (36%) and hardness (72%) are significantly enhanced relative to the untreated alloy.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Advanced Welding Techniques Analysis · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Metallurgical and Materials Engineering, College of Engineering, University of Tehran, Tehran, Iran

Department of Materials Science and Engineering, Sharif University of Technology, Tehran, Iran

Institute for Nanoscience and Nanotechnology, Sharif University of Technology, Tehran, Iran

References (55)

Show source-provided references
1. 10.1016/S1359-6462(00)00578-910.1016/S1359-6462(00)00578-9 ↗
2. 10.1016/S0079-6425(99)00010-910.1016/S0079-6425(99)00010-9 ↗
3. 10.1016/j.pmatsci.2012.10.00110.1016/j.pmatsci.2012.10.001 ↗
4. 10.1016/j.scriptamat.2007.10.04410.1016/j.scriptamat.2007.10.044 ↗
5. 10.1016/S0921-5093(02)00199-510.1016/S0921-5093(02)00199-5 ↗
6. 10.1016/j.msea.2016.02.08110.1016/j.msea.2016.02.081 ↗
7. 10.1016/j.msea.2015.07.00110.1016/j.msea.2015.07.001 ↗
8. 10.1016/j.mser.2005.07.00110.1016/j.mser.2005.07.001 ↗
9. 10.1016/j.pmatsci.2008.05.00110.1016/j.pmatsci.2008.05.001 ↗
10. 10.1016/j.matchar.2013.03.00410.1016/j.matchar.2013.03.004 ↗
11. 10.1016/j.matchemphys.2011.08.04210.1016/j.matchemphys.2011.08.042 ↗
12. 10.1016/j.matchemphys.2013.01.06210.1016/j.matchemphys.2013.01.062 ↗
13. 10.1016/j.matchemphys.2012.02.06810.1016/j.matchemphys.2012.02.068 ↗
14. 10.1016/j.actamat.2006.06.05410.1016/j.actamat.2006.06.054 ↗
15. 10.1016/j.actamat.2012.09.01610.1016/j.actamat.2012.09.016 ↗
16. 10.1016/j.matdes.2011.09.03510.1016/j.matdes.2011.09.035 ↗
17. 10.1179/136217108X33332710.1179/136217108X333327 ↗
18. 10.1016/j.msea.2013.07.06210.1016/j.msea.2013.07.062 ↗
19. 10.1016/j.msea.2008.09.06410.1016/j.msea.2008.09.064 ↗
20. 10.1016/j.msea.2011.02.08510.1016/j.msea.2011.02.085 ↗
21. 10.1016/j.matchar.2011.06.00710.1016/j.matchar.2011.06.007 ↗
22. 10.1016/j.matlet.2011.04.03010.1016/j.matlet.2011.04.030 ↗
23. 10.1016/j.msea.2012.08.14010.1016/j.msea.2012.08.140 ↗
24. 10.1016/j.msea.2008.11.06710.1016/j.msea.2008.11.067 ↗
25. 10.1016/j.carbon.2011.12.03410.1016/j.carbon.2011.12.034 ↗
26. 10.1016/j.carbon.2013.12.02510.1016/j.carbon.2013.12.025 ↗
27. 10.1016/j.wear.2010.03.00910.1016/j.wear.2010.03.009 ↗
28. 10.1016/j.wear.2012.11.04310.1016/j.wear.2012.11.043 ↗
29. 10.1016/j.jmrt.2013.10.00410.1016/j.jmrt.2013.10.004 ↗
30. 10.1016/S1003-6326(13)62593-510.1016/S1003-6326(13)62593-5 ↗
31. 10.1016/j.matdes.2013.04.02910.1016/j.matdes.2013.04.029 ↗
32. 10.1016/j.wear.2012.11.07910.1016/j.wear.2012.11.079 ↗
33. 10.1016/j.wear.2010.01.00510.1016/j.wear.2010.01.005 ↗
34. 10.1016/j.surfcoat.2015.11.01510.1016/j.surfcoat.2015.11.015 ↗
35. 10.1016/j.msea.2012.05.04910.1016/j.msea.2012.05.049 ↗
36. 10.1016/j.msea.2014.03.00810.1016/j.msea.2014.03.008 ↗
37. 10.1016/j.msea.2015.06.08110.1016/j.msea.2015.06.081 ↗
38. 10.1016/j.matdes.2010.11.05510.1016/j.matdes.2010.11.055 ↗
39. 10.1016/j.matdes.2016.05.11410.1016/j.matdes.2016.05.114 ↗
40. 10.1016/j.surfcoat.2011.08.06510.1016/j.surfcoat.2011.08.065 ↗
41. 10.1016/j.matdes.2016.06.08710.1016/j.matdes.2016.06.087 ↗
42. 10.1179/1743284714Y.000000057310.1179/1743284714Y.0000000573 ↗
43. Anon. ASTM standard E8M. Tension testing of metallic materials. Annual Book of ASTM Standards; ASTM, West Conshohocken; 03.01.1998.
44. 10.1016/j.msea.2007.02.07010.1016/j.msea.2007.02.070 ↗
45. 10.1016/j.matchar.2014.10.01310.1016/j.matchar.2014.10.013 ↗
46. 10.1016/j.matchar.2015.08.01610.1016/j.matchar.2015.08.016 ↗
47. 10.1016/j.msea.2016.04.07810.1016/j.msea.2016.04.078 ↗
48. 10.1016/j.scriptamat.2007.09.06410.1016/j.scriptamat.2007.09.064 ↗
49. 10.1007/s11661-002-0124-310.1007/s11661-002-0124-3 ↗
50. 10.1016/j.msea.2006.09.03610.1016/j.msea.2006.09.036 ↗
51. 10.1016/S1359-6454(03)00083-110.1016/S1359-6454(03)00083-1 ↗
52. 10.1016/S1359-6462(00)00480-210.1016/S1359-6462(00)00480-2 ↗
53. 10.1016/j.pmatsci.2013.09.00210.1016/j.pmatsci.2013.09.002 ↗
54. 10.1016/j.msea.2014.12.11010.1016/j.msea.2014.12.110 ↗
55. 10.1016/j.matdes.2015.08.06010.1016/j.matdes.2015.08.060 ↗