journal article·2017-10

Effects of the TiC and sintering process on the TiC-steel composite

Zhi Wang, Xinbo He, Tao Lin, You Guo, Huiping Shao, Xuanhui Qu

Materials Science and Technology· Volume 33· Issue 15
Publisher page

Abstract

In this paper, the composite of low alloy steel reinforced with TiC particles was prepared by conventional powder metallurgy process. The effects of the combined carbon content of TiC powder, sintering temperature and heating rate on the composite were studied. The results showed that the selected TiC powder has a combined carbon content of 17.91 wt-% and the optimal sintering process is heating from 600 to 1440°C at a rate of 1°C min −1 and holding for 1 h at 1440°C. The composite after heat treatment has excellent mechanical properties with density of 6.45 g cm −3 , hardness of 68–69 HRC and TRS of 1763 MPa, respectively, and will be used as wear-resistant parts, assembly fixtures, moulds, etc.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced materials and composites · Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Institute for Advanced Material & Technology, University of Science and Technology Beijing, Beijing, China

References (28)

Show source-provided references
1. 10.1016/j.ijrmhm.2013.07.01410.1016/j.ijrmhm.2013.07.014 ↗
2. Kinukawa K · Tool Prod · 1987 · 53 · 36
3. 10.1016/j.jallcom.2013.02.01310.1016/j.jallcom.2013.02.013 ↗
4. 10.1016/j.jallcom.2014.10.01210.1016/j.jallcom.2014.10.012 ↗
5. 10.1016/j.ijrmhm.2016.03.01210.1016/j.ijrmhm.2016.03.012 ↗
6. 10.1016/j.matchar.2014.12.01410.1016/j.matchar.2014.12.014 ↗
7. 10.1016/j.jallcom.2007.05.01810.1016/j.jallcom.2007.05.018 ↗
8. 10.1016/j.matdes.2014.10.08110.1016/j.matdes.2014.10.081 ↗
9. 10.1016/S0272-8842(03)00046-410.1016/S0272-8842(03)00046-4 ↗
10. 10.1016/j.ijrmhm.2011.01.01410.1016/j.ijrmhm.2011.01.014 ↗
11. 10.1016/j.matdes.2008.06.01910.1016/j.matdes.2008.06.019 ↗
12. 10.4028/www.scientific.net/MSF.610-613.68710.4028/www.scientific.net/MSF.610-613.687 ↗
13. 10.1016/S0263-4368(00)00016-010.1016/S0263-4368(00)00016-0 ↗
14. 10.1016/0263-4368(95)00027-G10.1016/0263-4368(95)00027-G ↗
15. 10.1016/S1003-6326(10)60134-310.1016/S1003-6326(10)60134-3 ↗
16. 10.1016/j.ijrmhm.2011.01.00410.1016/j.ijrmhm.2011.01.004 ↗
17. 10.1016/j.matlet.2009.06.02610.1016/j.matlet.2009.06.026 ↗
18. 10.1016/j.apt.2011.05.01210.1016/j.apt.2011.05.012 ↗
19. 10.1016/j.ijfatigue.2012.09.01610.1016/j.ijfatigue.2012.09.016 ↗
20. 10.1016/j.ijrmhm.2012.03.01210.1016/j.ijrmhm.2012.03.012 ↗
21. 10.1016/j.jallcom.2016.03.23710.1016/j.jallcom.2016.03.237 ↗
22. 10.1016/j.msea.2015.01.06110.1016/j.msea.2015.01.061 ↗
23. Liu JJ · 2009
24. Ye DL · 2002
25. 10.1179/pom.1997.40.2.14310.1179/pom.1997.40.2.143 ↗
26. 10.1016/j.ceramint.2016.01.06910.1016/j.ceramint.2016.01.069 ↗
27. 10.1016/S1359-6454(97)00344-310.1016/S1359-6454(97)00344-3 ↗
28. 10.1016/j.jallcom.2012.12.09910.1016/j.jallcom.2012.12.099 ↗