journal article·2017-10

The role of Cu and Al addition on the microstructure and fracture characteristics in the simulated coarse-grained heat-affected zone of high-strength low-alloy steels with superior toughness

Yu Liu, Guangqiang Li, Xiangliang Wan, Honghong Wang, Kaiming Wu, R. D. K. Misra

Materials Science and Technology· Volume 33· Issue 15
Publisher page

Abstract

The effects of Cu and Al addition on the microstructure and fracture in the coarse-grained heat-affected zone (CGHAZ) of high-strength low-alloy steels with superior toughness were studied and compared with the X70 pipeline base steel counterpart. The microstructure in base steel was dominated by a small fraction of acicular ferrite and predominantly bainite. However, acicular ferrite microstructure was obtained in Cu-bearing steel, which nucleated on complex oxide with outer layer of MnS and CuS because of Cu addition. The microstructure in Al-bearing steel consisted of bainite with ultrafine martensite–austenite constituent, which was refined by Al addition. CGHAZ in Cu-bearing and Al-bearing steels had superior impact toughness and ductile fracture, which were attributed to acicular ferrite and ultrafine martensite–austenite constituent, respectively.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgical Processes and Thermodynamics · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

The State Key Laboratory of Refractories and Metallurgy, Wuhan University of Science and Technology, Wuhan, China

Key Laboratory for Ferrous Metallurgy and Resources Utilization of Ministry of Education, Wuhan University of Science and Technology, Wuhan, China

Hubei Collaborative Innovation Center for Advanced Steels, Wuhan University of Science and Technology, Wuhan, China

Laboratory for Excellence in Advanced Steel Research, Department of Metallurgical, Materials, and Biomedical Engineering, University of Texas at El Paso, El Paso, TX, USA

Funding

China Postdoctoral Science Foundation · National Natural Science Foundation of China

References (30)

Show source-provided references
1. Bhadeshia HKDH, Honeycombe RWK. Steels microstructure and properties. 3rd ed. Oxford: Elsevier Ltd; 2006. p. 287.10.1016/B978-075068084-4/50015-7 ↗
2. Kojima A · Nippon Steel Tech Rep · 2004 · 90 · 33
3. Bhadeshia HKDH · 2001
4. Matsuda F · Weld World · 1991 · 29 · 307
5. Akselsen OM · Scand J Met · 1988 · 17 · 194
6. Ogibayashi S · Nippon Steel Tech Rep · 1994 · 61 · 70
7. 10.1016/S1359-6462(00)00560-110.1016/S1359-6462(00)00560-1 ↗
8. 10.1016/j.matchar.2006.11.02810.1016/j.matchar.2006.11.028 ↗
9. Wu Z · Metall Mater Trans B · 2016 · 46 · 122610.1007/s11663-015-0311-4 ↗
10. 10.2355/isijinternational.54.175510.2355/isijinternational.54.1755 ↗
11. 10.1016/S1359-6462(02)00451-710.1016/S1359-6462(02)00451-7 ↗
12. 10.1080/13621718.2015.110409810.1080/13621718.2015.1104098 ↗
13. 10.2355/isijinternational.41.4610.2355/isijinternational.41.46 ↗
14. 10.1016/S0921-5093(04)00859-710.1016/S0921-5093(04)00859-7 ↗
15. 10.1179/1743284714Y.000000060210.1179/1743284714Y.0000000602 ↗
16. 10.1179/1362171814Y.000000024610.1179/1362171814Y.0000000246 ↗
17. 10.1007/s10853-010-4803-y10.1007/s10853-010-4803-y ↗
18. 10.1002/srin.20150042410.1002/srin.201500424 ↗
19. Fang KM · 2009
20. Llewellyn DT · Ironmak Steelmak · 1995 · 21 · 25
21. 10.2355/isijinternational.36.140610.2355/isijinternational.36.1406 ↗
22. 10.1016/S1359-6462(97)00229-710.1016/S1359-6462(97)00229-7 ↗
23. Liu Z · Steelmaking · 2007 · 23 · 7
24. 10.1016/j.matchar.2012.02.00710.1016/j.matchar.2012.02.007 ↗
25. 10.2355/isijinternational.54.18810.2355/isijinternational.54.188 ↗
26. 10.2355/isijinternational.42.134410.2355/isijinternational.42.1344 ↗
27. 10.1016/S1006-706X(12)60087-910.1016/S1006-706X(12)60087-9 ↗
28. 10.1179/1743284713Y.000000028210.1179/1743284713Y.0000000282 ↗
29. 10.1007/s11041-011-9390-210.1007/s11041-011-9390-2 ↗
30. 10.1007/BF0265159810.1007/BF02651598 ↗