Investigation on microstructural properties of transient liquid phase (TLP) bonded IN-738LC superalloy with AMS 4776 filler metal
Source abstract
Abstract
In the present study, microstructural evolutions at the joint region of transient liquid phase bonded IN-738LC superalloy were examined. The experiments were carried out at 1100°C with different holding times using Ni–B–Si–Cr–Fe filler alloy, AMS 4776, with B and Si as the melting point depressant elements. It was found that insufficient isothermal solidification of liquated insert caused the formation of continuous centreline eutectic phases. The width of the eutectic decreased with the increase in holding time. Complete isothermal solidification, which precluded the formation of the centreline eutectic, occurred within 45 min of holding time. In addition to the centreline eutectic products, precipitation of boron rich particles was observed at the diffusion affected zone. Homogenisation of isothermally solidified joints at 1120°C for 300 min resulted in the elimination of intermetallic phases formed at the diffusion affected zone and formation of significant γ′ precipitates in the joint region.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High Temperature Alloys and Creep · Intermetallics and Advanced Alloy Properties · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Mining and Metallurgical Engineering, Amirkabir University of Technology (Tehran Polytechnic), Tehran 15875-4413, Iran
Department of Ceramic, Materials and Energy Research Center, Karaj 31787-316, Iran
Department of Materials Science and Engineering, University of Toronto, Toronto, Ontario M5S 3E4, Canada
References (20)
Show source-provided references
1. 10.1179/mst.1985.1.8.60810.1179/mst.1985.1.8.608 ↗
2. 10.1016/j.actamat.2004.08.03910.1016/j.actamat.2004.08.039 ↗
3. 10.1007/s11661-998-0320-x10.1007/s11661-998-0320-x ↗
4. 10.1179/13621710422501709910.1179/136217104225017099 ↗
5. 10.1361/10599490077034553910.1361/105994900770345539 ↗
6. Miglietti W · Trans. Am. Soc. Mech. Eng. · 1993 · 1
7. Duvall DS · Weld. J. · 1974 · 53 · 203
8. MacDonald WD, Eagar TW: ‘Transient liquid phase bonding processes’, Proc. Conf. on ‘Metal science of joining’, 93–100; 1992, Warrendale, PA, TMS.
9. Nicholas MG: ‘Joining process, introduction to brazing and diffusion bonding’; 1998, London, Kluwer Academic Publisher.
10. 10.1179/174328407X18592910.1179/174328407X185929 ↗
11. 10.1179/13621710422501217510.1179/136217104225012175 ↗
12. 10.1361/10549719977033572110.1361/105497199770335721 ↗
13. 10.1007/s11661-008-9588-010.1007/s11661-008-9588-0 ↗
14. 10.1179/mst.1997.13.12.105110.1179/mst.1997.13.12.1051 ↗
15. 10.1007/BF0258611110.1007/BF02586111 ↗
16. 10.1179/imr.1995.40.5.18110.1179/imr.1995.40.5.181 ↗
17. 10.1007/BF0264928210.1007/BF02649282 ↗
18. 10.2355/isijinternational.35.129810.2355/isijinternational.35.1298 ↗
19. 10.1179/174329304X870210.1179/174329304X8702 ↗
20. Crank J: ‘The mathematics of diffusion’, 2nd edn; 1975, Oxford, Oxford University Press.