journal article·2016-09

Microstructure and tensile behaviour of pure titanium produced after high-energy shot peening

S. Dai, Y. Zhu, Z. Huang

Materials Science and Technology· Volume 32· Issue 13
Publisher page

Abstract

In this study, the microstructure and tensile behaviour of pure titanium processed by means of high-energy shot peening have been studied. The results show that a nanocrystalline surface layer is prepared on the surface of pure titanium. During severe deformation, the dislocations, twins and slip bands with single orientation are formed first, then the intersections of twins and slip bands are observed, and then the subgrains appear near or in the slip bands and finally the randomly oriented nano-grains are formed due to the further breakdown. After high-energy shot peening, the ultimate tensile strength and the yield strength increase by 27 and 40%, while the elongation decreases by 64% after treatment, due to the increasing dislocation density, micro-strain and the grain refinement.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Surface Treatment and Residual Stress · High-Velocity Impact and Material Behavior · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Nano Structural Materials Center, Nanjing University of Science and Technology, Nanjing 210094, China

Department of Materials Science & Engineering, North Carolina State University, Raleigh, NC 27695, USA

Funding

Jiangsu Planned Projects for Postdoctoral Research Funds

References (28)

Show source-provided references
1. 10.1016/j.biomaterials.2006.08.04910.1016/j.biomaterials.2006.08.049 ↗
2. 10.1016/j.actbio.2012.12.00310.1016/j.actbio.2012.12.003 ↗
3. 10.1179/1743284714Y.000000073610.1179/1743284714Y.0000000736 ↗
4. 10.1179/1743284714Y.000000068710.1179/1743284714Y.0000000687 ↗
5. 10.1016/j.msea.2003.10.26110.1016/j.msea.2003.10.261 ↗
6. 10.1016/j.apsusc.2015.05.09310.1016/j.apsusc.2015.05.093 ↗
7. 10.1016/j.engfracmech.2011.06.01110.1016/j.engfracmech.2011.06.011 ↗
8. 10.1016/j.actamat.2004.05.02310.1016/j.actamat.2004.05.023 ↗
9. 10.1016/j.apsusc.2009.01.04810.1016/j.apsusc.2009.01.048 ↗
10. 10.1002/mabi.20060027010.1002/mabi.200600270 ↗
11. 10.1016/j.biomaterials.2004.03.04010.1016/j.biomaterials.2004.03.040 ↗
12. 10.1016/j.biomaterials.2003.12.00210.1016/j.biomaterials.2003.12.002 ↗
13. 10.1016/S0921-5093(03)00572-010.1016/S0921-5093(03)00572-0 ↗
14. 10.1016/j.matlet.2011.12.04610.1016/j.matlet.2011.12.046 ↗
15. 10.1016/j.surfcoat.2010.06.01410.1016/j.surfcoat.2010.06.014 ↗
16. 10.1016/j.apsusc.2013.12.00810.1016/j.apsusc.2013.12.008 ↗
17. 10.1016/j.vacuum.2014.08.00410.1016/j.vacuum.2014.08.004 ↗
18. 10.1016/j.actamat.2010.05.04410.1016/j.actamat.2010.05.044 ↗
19. 10.1016/j.surfcoat.2006.11.03110.1016/j.surfcoat.2006.11.031 ↗
20. 10.1016/j.surfcoat.2013.03.04710.1016/j.surfcoat.2013.03.047 ↗
21. 10.1016/j.apsusc.2013.05.13510.1016/j.apsusc.2013.05.135 ↗
22. 10.1016/S1359-6454(02)00501-310.1016/S1359-6454(02)00501-3 ↗
23. 10.1016/S1359-6462(97)00048-110.1016/S1359-6462(97)00048-1 ↗
24. 10.1016/S1005-0302(12)60021-810.1016/S1005-0302(12)60021-8 ↗
25. 10.1016/j.ijfatigue.2013.08.02210.1016/j.ijfatigue.2013.08.022 ↗
26. 10.1016/j.msea.2013.06.01910.1016/j.msea.2013.06.019 ↗
27. 10.1016/j.proeng.2011.04.36410.1016/j.proeng.2011.04.364 ↗
28. 10.1016/j.actamat.2005.09.01410.1016/j.actamat.2005.09.014 ↗