journal article·2014-11Open access

Capability of mechanical alloying and SPS technique to develop nanostructured high Cr, Al alloyed ODS steels

N. García-Rodríguez, M. Campos, J. M. Torralba, M. H. Berger, Y. Bienvenu

Materials Science and Technology· Volume 30· Issue 13

Abstract

Oxide dispersion strengthened (ODS) Fe alloys were produced by mechanical alloying (MA) with the aim of developing a nanostructured powder. The milled powders were consolidated by spark plasma sintering (SPS). Two prealloyed high chromium stainless steels (Fe–14Cr–5Al–3W) and (Fe–20Cr–5Al+3W) with additions of Y2O3 and Ti powders are densified to evaluate the influence of the powder composition on mechanical properties. The microstructure was characterised by scanning electron microscope (SEM) and electron backscattering diffraction (EBSD) was used to analyse grain orientation, grain boundary geometries and distribution grain size. Transmission electron microscopy (TEM) and scanning transmission electron microscopy (STEM) equipped with energy dispersive X-ray spectrometer (EDX) were used to observe the nanostructure of ODS alloys and especially to observe and analyse the nanoprecipitates. Vickers microhardness and tensile tests ( in situ and ex situ) have been performed on the ODS alloys developed in this work.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Fusion materials and technologies · Nuclear Materials and Properties · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Universidad Carlos III de Madrid, Av. Universidad 30, 28911 Leganés, Madrid, Spain

IMDEA Materials Institute c/Eric Kandel, 2, Tecnogetafe, 28906, Getafe, Madrid, Spain

MINES ParisTech, Centre des Matériaux, CNRS UMR 7633, BP 87, 91003 Evry Cedex, France

References (24)

Show source-provided references
1. 10.1016/j.jnucmat.2005.01.01710.1016/j.jnucmat.2005.01.017 ↗
2. 10.1016/S0022-3115(02)01082-610.1016/S0022-3115(02)01082-6 ↗
3. 10.1016/j.jnucmat.2010.12.27910.1016/j.jnucmat.2010.12.279 ↗
4. 10.1016/S0022-3115(02)01043-710.1016/S0022-3115(02)01043-7 ↗
5. 10.1016/j.jnucmat.2008.12.17110.1016/j.jnucmat.2008.12.171 ↗
6. Kim S, S. Ohtsuka, Kaito T, Yamashita S, Inoue M, Asayama T and Shobu T: J. Nucl. Mater. 2011, 417, 209–211.10.1016/j.jnucmat.2011.01.063 ↗
7. 10.1016/j.jnucmat.2010.12.30010.1016/j.jnucmat.2010.12.300 ↗
8. 10.1016/j.jnucmat.2011.03.04110.1016/j.jnucmat.2011.03.041 ↗
9. 10.1179/1743284710Y.000000003910.1179/1743284710Y.0000000039 ↗
10. 10.1016/j.apt.2012.11.01510.1016/j.apt.2012.11.015 ↗
11. 10.1016/j.intermet.2006.03.00610.1016/j.intermet.2006.03.006 ↗
12. 10.1016/j.msea.2009.06.03110.1016/j.msea.2009.06.031 ↗
13. Olier P · J. Nucl. Mater
14. 10.1016/j.jnucmat.2004.04.04310.1016/j.jnucmat.2004.04.043 ↗
15. 10.1016/j.jnucmat.2013.03.09010.1016/j.jnucmat.2013.03.090 ↗
16. 10.1179/1743290112Y.000000002310.1179/1743290112Y.0000000023 ↗
17. 10.1016/j.actamat.2009.10.01210.1016/j.actamat.2009.10.012 ↗
18. 10.1016/j.jnucmat.2011.08.02610.1016/j.jnucmat.2011.08.026 ↗
19. 10.1016/j.jnucmat.2010.09.01410.1016/j.jnucmat.2010.09.014 ↗
20. 10.1016/j.jnucmat.2007.03.14110.1016/j.jnucmat.2007.03.141 ↗
21. 10.1179/1743284714Y.000000055510.1179/1743284714Y.0000000555 ↗
22. 10.1016/j.actamat.2008.09.02510.1016/j.actamat.2008.09.025 ↗
23. 10.1088/0029-5515/49/5/05500310.1088/0029-5515/49/5/055003 ↗
24. 10.1016/j.jnucmat.2008.12.14810.1016/j.jnucmat.2008.12.148 ↗