Comparison of fatigue crack propagation behaviour in two gas turbine disc alloys under creep–fatigue conditions: Evaluating microstructure, environment and temperature effects
Source abstract
Abstract
Gas turbine disc materials should possess excellent fatigue and creep performance due to the severe in service conditions experienced. In this study, a comparison of fatigue crack propagation behaviour in two turbine disc alloys, i.e. N18 and low solvus high refractory (LSHR) superalloy, has been made in terms of the propagation rate and fractography observed under equivalent testing conditions. Temperatures of 650 and 725°C are compared for a trapezoidal dwell fatigue cycle (1–20–1–1) in both air and vacuum at an R ratio of 0·1. It is found that coarse grained LSHR superalloy has better fatigue crack propagation resistance than fine grained N18 in vacuum, which is ascribed to its better creep performance. Oxidation causes significant degradation of fatigue performance of these two alloys, especially in the LSHR superalloy at higher temperature (725°C), resulting in its inferior fatigue performance compared with N18. In the LSHR superalloy, it seems that oxidation is the principal contributor to the deterioration of fatigue resistance. This is supported by observations of transgranular fracture in vacuum and intergranular fracture in air. In contrast, creep is a greater contributor to the deterioration in fatigue performance of N18 (as indicated by the intergranular failure modes observed in vacuum). An apparent activation energy analysis is able to provide further insight into the underlying mechanisms of fatigue crack propagation under creep–oxidation–fatigue conditions in these two alloys.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High Temperature Alloys and Creep · Fatigue and fracture mechanics · Nuclear Materials and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Materials Research Group, Engineering and the Environment, University of Southampton, Highfield, Southampton SO17 1BJ, UK
University of Strathclyde, 85 Inchinnan Drive, Inchinnan, Renfrewshire PA4 9LJ, UK
References (24)
Show source-provided references
1. 10.1007/BF0266174010.1007/BF02661740 ↗
2. Timothy JG, Gabb P, Telesman J: ‘Thermal and mechanical property characterization of the advanced disk alloy LSHR’, NASA/TM-2005-213645, NASA, Washington, DC, USA, 2005.
3. 10.1016/j.ijfatigue.2010.09.02210.1016/j.ijfatigue.2010.09.022 ↗
4. Gabb TP, Kantzos PT, Gayda J: ‘TMS superalloy 2004’, 323–340; 2004, Warrendale, PA, The Minerals, Metals & Materials Society.
5. Gabb TP, Telesman J, Garg A, Bonacuse P, Gayda J: ‘TMS superalloy 2008’, 807–816; 2008, Warrendale, PA, The Minerals, Metals & Materials Society.10.7449/2008/Superalloys_2008_807_816 ↗
6. 10.1016/S1359-6454(96)00192-910.1016/S1359-6454(96)00192-9 ↗
7. 10.1016/S0921-5093(03)00156-410.1016/S0921-5093(03)00156-4 ↗
8. 10.1016/S1359-6454(01)00005-210.1016/S1359-6454(01)00005-2 ↗
9. Weber MRM, Schubert F, Affeldt EE, Kraus M: Proc. Conf. on ‘Materials for advanced power engineering 1994’, Liege, Belgium, October 1994, 961–969, Kluwer Academic Publishers.
10. Starink MJ · Mater. Sci. Technol. · 2007 · 23 · 141910.1179/174328407X213189 ↗
11. Wisbey IDMA, Brooks JW, Everitt S, Reed PAS: Proc. 7th Int. Charles Parsons Turbine Conf. ‘Power generation in an era of climate change’, 309–319, Glasgow, UK, September 2007, University of Strathclyde.
12. 10.1179/174328408X36146310.1179/174328408X361463 ↗
13. 10.1007/BF0266330510.1007/BF02663305 ↗
14. 10.1016/0025-5416(82)90167-710.1016/0025-5416(82)90167-7 ↗
15. 10.1016/0142-1123(83)90026-910.1016/0142-1123(83)90026-9 ↗
16. 10.1016/S0142-1123(97)00027-310.1016/S0142-1123(97)00027-3 ↗
17. 10.1016/0142-1123(93)90376-210.1016/0142-1123(93)90376-2 ↗
18. 10.1007/BF0264640210.1007/BF02646402 ↗
19. 10.1007/BF0262837010.1007/BF02628370 ↗
20. 10.1007/BF0264665710.1007/BF02646657 ↗
21. 10.1111/j.1460-2695.2009.01366.x10.1111/j.1460-2695.2009.01366.x ↗
22. 10.1016/j.msea.2008.02.01610.1016/j.msea.2008.02.016 ↗
23. 10.1016/S1359-6462(03)00049-610.1016/S1359-6462(03)00049-6 ↗
24. 10.1016/j.msea.2006.05.03010.1016/j.msea.2006.05.030 ↗