journal article·2019-11

Austenite stabilisation by two step partitioning of manganese and carbon in a Mn-TRIP steel

P. J. Du, D. P. Yang, M. K. Bai, X. C. Xiong, D. Wu, G. D. Wang, H. L. Yi

Materials Science and Technology· Volume 35· Issue 17
Publisher page

Abstract

In addition to manganese, carbon partitioning has been proposed in a new medium Mn-TRIP steel by two-step partitioning during the first batching annealing and the final continuous annealing. In the second-step partitioning, the cementite dissolves and blocky austenite forms with carbon enrichment, while the partition of manganese is negligible from prior lath austenite back into ferrite due to short duration. The combined partition of carbon and manganese improves both fraction and stability of retained austenite. The alloy has exhibited the product of strength and elongation of approximately 50 GPa%. It is highlighted that there is no Lüder strain in tensile curves. The microstructure evolution and relationship of microstructure and properties have been investigated and characterised carefully in this research. This paper is part of a Thematic Issue on Medium Manganese Steels.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Welding Techniques and Residual Stresses

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

The State Key Laboratory of Rolling and Automation, Northeastern University, Shenyang, People's Republic of China

Easyforming Materials Technology Co., Ltd., Suzhou, People's Republic of China

Funding

National Natural Science Foundation of China · Fundamental Research Funds for the Central Universities · 111 Project

References (32)

Show source-provided references
1. 10.1016/j.scriptamat.2016.07.01310.1016/j.scriptamat.2016.07.013 ↗
2. 10.1016/j.msea.2011.05.03910.1016/j.msea.2011.05.039 ↗
3. 10.1016/j.scriptamat.2010.06.02310.1016/j.scriptamat.2010.06.023 ↗
4. 10.1179/1743284714Y.000000072210.1179/1743284714Y.0000000722 ↗
5. 10.1016/j.actamat.2011.03.02510.1016/j.actamat.2011.03.025 ↗
6. 10.1016/j.scriptamat.2015.04.00910.1016/j.scriptamat.2015.04.009 ↗
7. 10.1080/02670836.2018.142438310.1080/02670836.2018.1424383 ↗
8. Takahashi M. · Nippon Steel Technical Report · 2003 · 88 · 2
9. 10.1007/s11661-012-1402-310.1007/s11661-012-1402-3 ↗
10. 10.1007/s11661-009-0124-710.1007/s11661-009-0124-7 ↗
11. 10.1016/j.scriptamat.2010.12.01210.1016/j.scriptamat.2010.12.012 ↗
12. 10.2355/isijinternational.ISIJINT-2015-18710.2355/isijinternational.ISIJINT-2015-187 ↗
13. 10.1016/j.matdes.2015.05.08510.1016/j.matdes.2015.05.085 ↗
14. 10.1016/j.scriptamat.2010.09.04010.1016/j.scriptamat.2010.09.040 ↗
15. Arnell R. · J Iron Steel Inst · 1968 · 206 · 1035
16. 10.1016/j.actamat.2005.08.01710.1016/j.actamat.2005.08.017 ↗
17. Bhadeshia H · 2011
18. 10.1016/j.actamat.2014.05.05710.1016/j.actamat.2014.05.057 ↗
19. 10.2355/isijinternational.34.52210.2355/isijinternational.34.522 ↗
20. 10.1007/s11661-009-0072-210.1007/s11661-009-0072-2 ↗
21. 10.1007/s11661-011-0687-y10.1007/s11661-011-0687-y ↗
22. 10.1007/BF0264612710.1007/BF02646127 ↗
23. 10.1016/j.actamat.2014.10.05210.1016/j.actamat.2014.10.052 ↗
24. 10.1007/s11661-013-2047-610.1007/s11661-013-2047-6 ↗
25. 10.1007/s11661-014-2449-010.1007/s11661-014-2449-0 ↗
26. 10.1016/j.scriptamat.2018.05.01610.1016/j.scriptamat.2018.05.016 ↗
27. 10.2355/isijinternational.48.110710.2355/isijinternational.48.1107 ↗
28. 10.1016/j.scriptamat.2010.05.00610.1016/j.scriptamat.2010.05.006 ↗
29. 10.1016/j.scriptamat.2005.09.01110.1016/j.scriptamat.2005.09.011 ↗
30. 10.1016/j.actamat.2014.07.00510.1016/j.actamat.2014.07.005 ↗
31. 10.1016/S1359-6454(02)00260-410.1016/S1359-6454(02)00260-4 ↗
32. 10.1016/j.scriptamat.2012.11.00310.1016/j.scriptamat.2012.11.003 ↗