Determination of residual stresses in welded components by finite element analysis
Source abstract
Abstract
The continued safe and reliable operation of plant invariably has to consider the assessment of defects in welded structural components. This requires some estimate of the residual stresses that have developed during the welding fabrication process. There is an increasing use of computational weld mechanics to evaluate residual stresses and this paper describes the development of guidelines for using finite element analysis, which are now incorporated into the EDF Energy R6 defect assessment procedure, to determine stresses for use in the procedure. Prior to use in assessment the predicted results should be validated by comparison with measurements and the guidelines provide advice on the differing standards of validation which may be applied including the manufacture and testing of validation mock-ups. This paper is part of a Themed Issue on Measurement, modelling and mitigation of residual stress.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Welding Techniques and Residual Stresses · Non-Destructive Testing Techniques · Fatigue and fracture mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Amec Foster Wheeler, UK
University of Manchester, UK
References (62)
Show source-provided references
1. Bradford R. A. W. · 1998
2. Holt P. J., and Spindler M. W. ‘A practical application of continuum damage mechanics to plant integrity assessment, Inelasticity and damage in solids subject to microstructural change’, University of Newfoundland, Canada, 25–27 September 1996.
3. Coleman M. C., Miller D. A., and Stevens R. A. ‘Reheat cracking and strategies to assure integrity of Type 316 weld components’, ‘International Conference on Integrity of High Temperature Welds’, 1998, Nottingham.
4. R6: Assessment of the integrity of structures containing defects, 2015, EDF Energy.
5. Bate S. K., and Watson C.: New UK research programme in residual stresses, ASME Pressure Vessels and Piping Conference, 2006, Vancouver, BC.10.1115/PVP2006-ICPVT-11-93567 ↗
6. Bate S. K., Hurrell P. R., Francis J. A., and Turski M. ‘UK research programme on residual stress – a review of progress’, ASME PRessure Vessels and Piping Conference, Chicago, 2008.10.1115/PVP2008-61073 ↗
7. 10.1016/j.commatsci.2011.10.02410.1016/j.commatsci.2011.10.024 ↗
8. Bray D. P., Dennis R. J., and Smith M. C. ‘Prediction of welding residual stresses, crack initiation and creep crack driving forces C(t) within a continuous finite element solution’, ASME Pressure Vessels and Piping Conference, 2010, Bellevue, WA, PVP2010-25699.10.1115/PVP2010-25699 ↗
9. Price A., Smith M. C., Dennis R. J., and Spindler M. W. ‘Revised weld residual stress and creep damage assessments’, ASME Pressure Vessels and Piping Conference, 2009, Prague, PVP2009-77960.10.1115/PVP2009-77960 ↗
10. Leggatt N. A., Dennis R. J., Smith M. C., and Bouchard P. J. ‘Numerical methods for welding simulation: the next steps’, ASME Pressure Vessels and Piping Conference, July 2008, PVP2008-61498.10.1115/PVP2008-61498 ↗
11. Leggatt N. A., Dennis R. J., Bouchard P. J., and Smith M. C. ‘Numerical methods to predict distortion in welded components’, ASME Pressure Vessels and Piping Conference, July 2008, PVP2008-61497.10.1115/PVP2008-61497 ↗
12. 10.1016/j.ijpvp.2004.08.00310.1016/j.ijpvp.2004.08.003 ↗
13. Rathbun H. J., Rudland D., Fredette L., Csontos A., and Scott P. ‘NRC welding residual stress validation program – International round robin details and findings’, 2011 ASME Pressure Vessels and Piping Division Conference, Baltimore, 17–20 July 2011, PVP 2011-57642.
14. Fredette L., Kerr M., Rathbun H. J., and Broussard J. E. ‘NRC/EPRI Welding Residual Stress Validation Program – Phase III Details and Findings’, ASME Pressure Vessels and Piping Conference, 2011, Baltimore, PVP2011-57645.10.1115/PVP2011-57645 ↗
15. Smith M. C., Smith A. C., Ohms C., and Wimpory R. C. ‘A review of the NeT TG4 international weld residual stress benchmark’, ASME Pressure Vessels and Piping Conference, 2015, Boston, MA, PVP2015-45801.10.1115/PVP2015-45801 ↗
16. 10.1016/j.ijpvp.2014.05.00210.1016/j.ijpvp.2014.05.002 ↗
17. Smith M. C., Muransky O., Smith D. J., Cao S. D., Bouchard P. J., and Mathew J. ‘Modelling and measuring residual stresses in pipe girth welds – lessons from the STYLE Framework 7 project’, ASME Pressure Vessels and Piping Conference, 2014, Anaheim, CA, PVP2014-29005.10.1115/PVP2014-29005 ↗
18. 10.1016/j.ijpvp.2008.11.01710.1016/j.ijpvp.2008.11.017 ↗
19. 10.1016/j.ijpvp.2008.11.01610.1016/j.ijpvp.2008.11.016 ↗
20. Ohms C., Martins R. V., Uca O., Youtsos A. G., Bouchard P. J., Smith M. C., Keavey M., Bate S. K., Gilles P., Wimpory R. C., and Edwards L. E. ‘The European network on neutron techniques standardization for structural integrity – NeT 2008’, ASME Pressure Vessels and Piping Division Conference, 2008, Chicago, PVP2008-61913.10.1115/PVP2008-61913 ↗
21. Teng H., Bate S. K., and Beardsmore D. W. ‘Statistical analysis of residual stress profiles using a heuristic method’, ASME Pressure Vessels and Piping Conference, Chicago, 2008.10.1115/PVP2008-61378 ↗
22. 10.1111/j.1475-1305.2009.00718.x10.1111/j.1475-1305.2009.00718.x ↗
23. Nadri B., Smith M. C., and Truman C. E. ‘Statistical analysis of pipe girth weld experimental residual stress data’, ASME Pressure Vessels and Piping Conference, Prague, July 2009, PVP2009-77571.10.1115/PVP2009-77571 ↗
24. Nadri B., Bouchard P. J., Truman C. E., and Smith D. J. ‘A statistical framework for analysing weld residual stresses for structural integrity assessment’, ASME Pressure Vessels and Piping Conference, 2008, Chicago, ASME PVP2008-61339.10.1115/PVP2008-61339 ↗
25. Mathew J., Moat R. J., and Bouchard P. J. ‘Optimised neural network prediction of residual stress profiles for structural integrity assessment of pipe girth welds’, ASME Pressure Vessels and Piping Conference, Anaheim, CA, July 20–24, 2014.10.1115/PVP2014-28845 ↗
26. Mathew J., Moat R. J., and Bouchard P. J. ‘Prediction of pipe girth weld residual stress profiles using artificial neural networks’, ASME Pressure Vessels and Piping Conference, Paris, July 14–18, 2013.10.1115/PVP2013-97491 ↗
27. 10.1007/BF0326338010.1007/BF03263380 ↗
28. Dong P. · WRC Bull. · 2002 · 476 · 1
29. Bendeich P. J., Muransky O., Hamelin C. J., Smith M. C., and Edwards L. ‘The impact of axi-symmetric boundary conditions on predicted residual stress and shrinkage in a PWR nozzle dissimilar metal weld, ASME Pressure Vessels and Piping Conference’, Toronto, PVP2012-78584, 2012.10.1115/PVP2012-78407 ↗
30. 10.1016/j.commatsci.2012.05.04210.1016/j.commatsci.2012.05.042 ↗
31. 10.1016/j.actamat.2012.03.02210.1016/j.actamat.2012.03.022 ↗
32. Jeyaganesh B., Callaghan M., English P. D., Vasileiou A., Roy M. J., Guo W., Irvine N. M., Smith M. C., Li L., and Sherry A. H. ‘Overview of welding research under the New Nuclear Manufacturing (NNUMAN) Programme’, ASME Pressure Vessels and Piping Division Conference, Anaheim, PVP2014-29015, 2014.10.1115/PVP2014-29015 ↗
33. 10.1016/j.actamat.2014.04.04510.1016/j.actamat.2014.04.045 ↗
34. 10.1080/1023816041000173450410.1080/10238160410001734504 ↗
35. 10.1016/j.commatsci.2011.10.02610.1016/j.commatsci.2011.10.026 ↗
36. Smith M. C., Muransky O., Austin C., Bendeich P. J., and Edwards L. ‘Optimised modelling of weld metal constitutive behaviour in the NeT TG4 international weld simulation and measurement benchmark’, ASME pressure vessels and piping conference, Toronto, ASME PVP2012-78405, 2012.10.1115/PVP2012-78405 ↗
37. 10.1016/j.ijsolstr.2011.07.00610.1016/j.ijsolstr.2011.07.006 ↗
38. A Novel Approach to Annealing using ABAQUS – ABAQUS Behaviour with soft annealing’, ABAQUS Report Q305-P106, V2.1, 2007.
39. VFT Virtual Fabrication and Weld Modelling Software, Version 2.00 User Manual, Battelle Memorial Institute Report, 2006.
40. 10.1115/1.344350410.1115/1.3443504 ↗
41. McDill J. M. J., Oddy A. S., and Goldak J. A. ‘Comparing 2-D plane strain and 3-D analyses of residual stresses in welds’, Proc 3rd Int Conf on Trends in Welding Research, 1992, 105.
42. Leung C. K., and Pick R. J. ‘The use of generalised plane strain elements in the prediction of residual stresses in welded flat plates’, Proc Symposium on the Computer Modelling of Fabrication Processes and Constitutive Behaviour of Metals, 1986, 563.
43. 10.1016/j.ijpvp.2004.08.00410.1016/j.ijpvp.2004.08.004 ↗
44. Keim E., Weiss E., Fricke S., and Schmidt J. ‘Effect of last pass heat sink welding and service transients on residual stresses’, The Sixth Int Conf on Residual Stresses, Oxford, 2000, 1433–1442.
45. Zhang J., Dong P., Brust F., and Shack W. J. ‘Analysis of residual stresses in a girth weld of a BWR core shroud’, ASME Pressure Vessels and Piping Conference, 1997.
46. Warren A., Bate S. K., and Hurrell P. R. ‘The effect of modelling simplifications on the prediction of residual stresses in a multi-pass plate groove weld’, ASME PRessure Vessels and Piping Conference, San Antonio, Texas, 2007.10.1115/PVP2007-26339 ↗
47. 10.1016/j.commatsci.2011.02.03110.1016/j.commatsci.2011.02.031 ↗
48. 10.1080/0149573015050044210.1080/01495730150500442 ↗
49. 10.1007/BF0266733310.1007/BF02667333 ↗
50. SYSWELD: ESI Group, France, 2016.
51. Smith R. M.: FEAT-WMT: weld-modelling tool user guide FEATPLUS Limited Report FP/CR/0029/11, 2011.
52. 1997
53. Becker A. A.: State of the Art review – weld simulation using finite elements, NAFEMS Report, 2005.
54. Dennis R. J., Leggatt N. A., and Gregg A. ‘Optimisation of Weld Modelling Techniques – Bead-on-plate Analysis’, ASME PVP: Pressure Vessels and Piping Division Conference, Vancouver, BC, Canada, 23–27 July 2006, PVP2006-ICPVT11-93907.
55. Smith M. C., Muransky O., Goodfellow A., Kingston E. J., Freyer P., Marlette S., Wilkowski G., Brust F., and Shim D. J. ‘The impact of key simulation variables on predicted residual stresses in pressuriser nozzle dissimilar metal weld mock-ups. Part 2 – comparison of simulation and measurements’, ASME PVP 2010, Bellevue, WA, 18–22 July 2010, PVP2010-26025.10.1115/PVP2010-26025 ↗
56. Smith M. C., Muransky O., Bendeich P. J., and Edwards L. ‘The impact of key simulation variables on predicted residual stresses in pressuriser nozzle dissimilar metal weld mock-ups. Part 1 – simulation’, ASME PVP 2010, Bellevue, WA, 18–22 July 2010, PVP2010-26023.10.1115/PVP2010-26023 ↗
57. Shim D. J., Kalyanam S., Punch E., Zhang T., Brust F., Wilkowski G., Goodfellow A., and Smith M. C. ‘Advanced finite element analysis (AFEA) evaluation for circumferential and axial PWSCC defects’, ASME PVP 2010, 2010, Bellevue, WA, PVP2010–25162.10.1115/PVP2010-25162 ↗
58. Marlette S., Freyer P., Smith M. C., Goodfellow A., Pitoiset X., Voigt B., Rishel R., and Kingston E. J. ‘Simulation and measurement of through-wall residual stresses in a structural weld overlaid pressurizer nozzle’, ASME PVP 2010, Bellevue, WA, 18–22 July 2010, PVP2010–25736.10.1115/PVP2010-25736 ↗
59. Brust F., Zhang T., Shim D. J., Kalyanam S., Wilkowski G., Smith M. C., and Goodfellow A. ‘Summary of weld residual stress analyses for dissimilar metal weld nozzles’, ASME PVP 2010, Bellevue, WA, July 18–22 2010, PVP2010-26106.10.1115/PVP2010-26106 ↗
60. 10.1016/j.ijpvp.2008.11.01910.1016/j.ijpvp.2008.11.019 ↗
61. Smith M. C., Bate S. K., and Bouchard P. J. ‘Simple benchmark problems for finite element weld residual stress simulation’, ASME Pressure Vessels and Piping Conference, 2013, Paris, PVP2013-98033.10.1115/PVP2013-98033 ↗
62. ENPOWER: management of nuclear plant operation by optimising weld repairs, final technical report, Contract FIKS-CT-2001-00167, Institut de Soudure Report, 2005.