Life assessment methodologies incoroporating shot peening process effects: Mechanistic consideration of residual stresses and strain hardening Part 2 – approaches to fatigue lifing after shot peening
Source abstract
Abstract
Shot peening is a well known process applied to components in order to improve their fatigue resistance. In recent years, there has been an increasing interest in including the effects of the shot peening process in life assessment models since this would allow a reduction in conservatism compared to those in current application. Part 1 of this review dealt with the effects of the shot peening process (surface roughening, strain hardening and compressive residual stresses) and the resulting effect on component fatigue life. This part of the review considers how this effect on component fatigue life can be incorporated into life assessment modelling approaches with discussion of the relative merits of each approach. The paper concludes with a flow chart demonstrating a possible route for the inclusion of shot peening effects within industrial component life assessment frameworks.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Surface Treatment and Residual Stress · Engineering and Material Science Research · Fatigue and fracture mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Faculty of Engineering and the Environment University of Southampton, SO17 1BJ, UK
E.ON New Build and Technology NG11 0EE, UK
References (52)
Show source-provided references
1. 10.1179/1743284713Y.000000022210.1179/1743284713Y.0000000222 ↗
2. Basquin OH · Proceed. Am. Soc. Test. Mater. · 1910 · 10 · 625
3. 10.1115/1.401502010.1115/1.4015020 ↗
4. Manson SS: ‘Behaviour of materials under conditions of thermal stress’, National Advisory Commission on Aeronautics Report 1170, Lewis Flight Propulsion Laboratory, Cleveland, OH, USA, 1954.
5. Goodman J: ‘Mechanics applied to engineering’; 1899, London, Longmans Green.
6. Gerber H · Z. Bayer. Arch. Ing. · 1874 · 6 · 101
7. Smith RN · J. Mater. · 1970 · 5 · 767
8. 10.1016/j.engfracmech.2007.04.00710.1016/j.engfracmech.2007.04.007 ↗
9. 10.1016/0013-7944(79)90081-X10.1016/0013-7944(79)90081-X ↗
10. Kitagawa H, Takahashi S: ‘Applicability of fracture mechanics to very small cracks or the cracks in the early stage’, Proc. 2nd Int. Conf. on ‘Mechanical behaviour of materials’, Metals Park, OH, USA, 1976, ASM, 627–631.
11. Carpinteri A, de Freitas M, Spagnoli (eds.) A: ‘Biaxial/multiaxial fatigue and fracture, ESIS Publication 31’, 2003, Amsterdam, Elsevier.
12. Crossland B: ‘Effect of large hydrostatic pressures on the torsional fatigue strength of an alloy steel’, Proc. Int. Conf. on ‘Fatigue of metals’, London, 1956, IMechE, 138–149.
13. Sines G: ‘Behaviour of metals under complex static and alternating stresses’, in ‘Metal fatigue’, (ed. , Sines G, Waisman J L), 145–169; 1959, New York, McGraw-Hill.
14. 10.1016/j.ijfatigue.2011.01.00310.1016/j.ijfatigue.2011.01.003 ↗
15. ‘R6 – assessment of the integrity of structures containing defects’, Revision 4, British Energy Generation Ltd, 2001.
16. ‘Guide to methods for assessing the acceptability of flaws in metallic structures’, British Standard, BS 7910:2005, 2005.
17. Paris PC · Trend Eng. · 1961 · 13 · 9
18. 10.1115/1.365690010.1115/1.3656900 ↗
19. 10.1111/j.1460-2695.2009.01422.x10.1111/j.1460-2695.2009.01422.x ↗
20. 10.1016/S0142-1123(01)00171-210.1016/S0142-1123(01)00171-2 ↗
21. ‘R5 – assessment procedure for the high temperature response of structures’, Issue 3, British Energy Generation Ltd, 2001.
22. 10.1520/STP13435S10.1520/STP13435S ↗
23. 10.1016/S0142-1123(01)00133-510.1016/S0142-1123(01)00133-5 ↗
24. 10.1016/j.ijfatigue.2003.12.00310.1016/j.ijfatigue.2003.12.003 ↗
25. 10.1016/j.ijfatigue.2008.11.01710.1016/j.ijfatigue.2008.11.017 ↗
26. 10.1111/j.1460-2695.1992.tb01262.x10.1111/j.1460-2695.1992.tb01262.x ↗
27. Dowling NE: ‘Mechanical behaviour of materials – engineering methods for deformation, fracture and fatigue’, 2nd edn; 1999, Upper Saddle, NJ, Prentice-Hall.
28. Bueckner HF · Z. Angew. Math. Mech. · 1970 · 50 · 529
29. Wu XR, Carlsson AJ: ‘Weight functions and stress intensity factor solutions’, 1st edn; 1991, Oxford, Pergamon Press.
30. 10.4028/www.scientific.net/MSF.331-337.140110.4028/www.scientific.net/MSF.331-337.1401 ↗
31. 10.1002/mawe.1990021100610.1002/mawe.19900211006 ↗
32. 10.1016/j.proeng.2011.11.12010.1016/j.proeng.2011.11.120 ↗
33. 10.1016/j.actamat.2011.03.01310.1016/j.actamat.2011.03.013 ↗
34. 10.1016/S0013-7944(03)00017-110.1016/S0013-7944(03)00017-1 ↗
35. 10.1023/A:102657440085810.1023/A:1026574400858 ↗
36. 10.1016/j.ijfatigue.2012.01.01910.1016/j.ijfatigue.2012.01.019 ↗
37. 10.1243/030932405X3098410.1243/030932405X30984 ↗
38. 10.1007/s11340-010-9346-210.1007/s11340-010-9346-2 ↗
39. 10.1016/j.ijsolstr.2010.03.00210.1016/j.ijsolstr.2010.03.002 ↗
40. Cláudio RA · Ciência Technol. Mater. · 2008 · 20 · 99
41. 10.1016/j.engfailanal.2008.07.01310.1016/j.engfailanal.2008.07.013 ↗
42. 10.4028/www.scientific.net/KEM.417-418.90110.4028/www.scientific.net/KEM.417-418.901 ↗
43. 10.1016/j.proeng.2011.04.44510.1016/j.proeng.2011.04.445 ↗
44. 10.1016/j.ijfatigue.2010.02.01210.1016/j.ijfatigue.2010.02.012 ↗
45. Benedetti M · J. Eng. Mater. Technol. · 2010 · 132
46. 10.1016/j.proeng.2009.06.03510.1016/j.proeng.2009.06.035 ↗
47. 10.1016/j.surfcoat.2011.12.00810.1016/j.surfcoat.2011.12.008 ↗
48. 10.1016/j.msea.2010.05.08010.1016/j.msea.2010.05.080 ↗
49. 10.1046/j.1460-2695.2000.00287.x10.1046/j.1460-2695.2000.00287.x ↗
50. 10.1016/j.ijfatigue.2004.03.00710.1016/j.ijfatigue.2004.03.007 ↗
51. Dang-Van K: ‘Sur la résistance à la fatigue des métaux’, PhD thesis, Scientifique et Technologique l'Armenent, Paris, France, 1973.
52. 10.1017/CBO978113916797010.1017/CBO9781139167970 ↗