journal article·2010-12

Mapping microstructure inhomogeneity using electron backscatter diffraction in 316L stainless steel subjected to hot plane strain compression tests

L. Sun, M. J. Thomas, B. P. Wynne, E. J. Palmiere, K. P. Mingard, B. Roebuck

Materials Science and Technology· Volume 26· Issue 12
Publisher page

Abstract

The microstructure inhomogeneity in 316L stainless steel subjected to hot plane strain compression tests has been assessed using electron backscatter diffraction (EBSD). Two variables were investigated: the effect of strain rate and the effect of friction at the tool/specimen interface. Tests were performed isothermally at 950°C at nominal equivalent tensile strain rates of 0·01 and 1 s−1. Low and high friction conditions have been simulated by applying both a glass based lubricant and a boron nitride spray respectively. Results suggest that friction causes a variation in microstructure from the surface to the midplane of the deformed specimen. Several methods used to quantify and represent this inhomogeneity are presented in the present paper. Electron backscatter diffraction measurement issues are discussed. A grain size mapping method using a two-dimensional moving average has been developed to overcome the difficulties associated with the visualisation of measurement results over large areas on EBSD maps. It has proved to be a powerful tool for the spatial statistics of large quantity data obtained by EBSD.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Institute of Microstructural and Mechanical Processing EngineeringThe University of Sheffield, Mappin Street, Sheffield S1 3JD, UK

Materials DivisionNational Physical Laboratory, Hampton Road, Teddington, Middlesex TW11 0LW, UK

References (19)

Show source-provided references
1. 10.1179/mht.2006.00610.1179/mht.2006.006 ↗
2. 10.1179/02670830110151106810.1179/026708301101511068 ↗
3. 10.1179/02670830110151107710.1179/026708301101511077 ↗
4. 10.1179/02670830322500813010.1179/026708303225008130 ↗
5. Roebuck B., Mingard K. P., Brooks M., Palmiere E. J., Wynne B. P., Thomas M. J., Bryant M., and Evans W. J. ‘Good practice guide for quantifying microstructural heterogeneity in hot com-pression testpieces’, Measurement good practice guide no. 106, National Physical Laboratory, Department of Trade and Industry, Teddington, UK, May 2008.
6. 10.1046/j.1365-2818.1999.00578.x10.1046/j.1365-2818.1999.00578.x ↗
7. 10.1023/A:101797343259210.1023/A:1017973432592 ↗
8. 10.1111/j.1365-2818.2007.01814.x10.1111/j.1365-2818.2007.01814.x ↗
9. 10.1179/174328407X16885610.1179/174328407X168856 ↗
10. 10.1007/s11661-003-0313-810.1007/s11661-003-0313-8 ↗
11. Roberts W. · Sci · 1979 · 13 · 195
12. Funahashi S. · ‘The effects of friction and lubrication on multipass hot deformation’ · 2009
13. 10.1016/j.ijrmhm.2008.06.00910.1016/j.ijrmhm.2008.06.009 ↗
14. Underwood E. E. ‘Quantitative stereology’, 284; 1970, Reading, MA; London, Addison-Wesley.
15. Han J. H., and Kim D. Y. ‘Analysis of the proportionality constant correlating the mean intercept length to the average grain-size’, Acta Metall Mater. 1995, 43, (8), 3185–3188.10.1016/0956-7151(95)00007-I ↗
16. 10.1111/j.1365-2818.2006.01698.x10.1111/j.1365-2818.2006.01698.x ↗
17. Dehoff R. T., and Rhines F. N. ‘Quantitative microscopy’, 432; 1968, New York; London, McGraw-Hill.
18. Roebuck B., Stewart M., Morrell R., Gee M., and Plint G. ‘Mapping hardness using automated depth sensing process’, Surf Eng. 2001, 17, (6), 447–449.
19. 10.1520/JTE10757J10.1520/JTE10757J ↗