Influence of P and N on hot ductility of high Al, boron containing TWIP steels
Source abstract
Abstract
The influence of P in the range ∼0·01 to 0·07 with high Ti and N additions on the hot ductility of 1·5Al, boron treated twinning induced plasticity (TWIP) steels has been examined. P, even at the 0·02 level, has a small detrimental influence on the hot ductility, and ductility decreases progressively as the P content is increased. Low melting point Fe(Mn)phosphide phases were found at the austenite grain boundaries accounting for this deterioration in ductility. As it is difficult to cast these steels, without cracks forming, P levels should be as low as possible, preferably ∼0·01. High Ti and N additions (≥0·07Ti, 0·01N) to these B treated, TWIP steels gave rise to good ductility throughout the straightening temperature range 800–950°C. It is suggested that the high N level results in good ductility because although there is a large volume fraction of TiN, the high Ti/N ratio encourages growth of the TiN precipitates, and the high [Ti][N] product causes the precipitation to take place at high temperatures so that it is too coarse to influence the hot ductility.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
POSCO Technical Research Laboratories, Korea
City University London, UK
Industrial Metals and Mineral Research Institute, University of Pretoria, Pretoria, South Africa
References (23)
Show source-provided references
1. 10.1179/026708309X1250693387338710.1179/026708309X12506933873387 ↗
2. 10.1179/026708309X1259571230591510.1179/026708309X12595712305915 ↗
3. 10.1179/1743284711Y.000000010910.1179/1743284711Y.0000000109 ↗
4. 10.1179/1743284713Y.000000025910.1179/1743284713Y.0000000259 ↗
5. 10.1179/1743284713Y.000000039910.1179/1743284713Y.0000000399 ↗
6. Kim SK, Cho JW, Kwak WJ and Kim G: ‘Development of TWIP steel for automotive applications’, Proc. 3rd Int. Conf. on ‘New developments in metallurgical process technologies’, Dusseldorf, Germany, June 2007, TEMA Marketing AG, Steel Institute VDEH, 690–697.
7. 10.2355/isijinternational.43.43810.2355/isijinternational.43.438 ↗
8. Chamont B, Chemelle P and Biausser H: Proc. Conf. on ‘Physical simulation techniques for welding, hot forming and continuous casting’, MTL 92–43TR, Ottawa, Canada, 1988, CANMET, II-48.
9. 10.2355/isijinternational.30.31010.2355/isijinternational.30.310 ↗
10. 10.1179/03071697980327647110.1179/030716979803276471 ↗
11. Adams CJ: National Open Heart Basic Oxygen Steel Conf. Proc., Pittsburgh, USA, 1971, American Institute of Mining, Metallurgical, and Petroleum Engineers. National Open Hearth and Basic Oxygen Steel Committee, Vol. 54, 290–302.
12. 10.1007/BF0267476110.1007/BF02674761 ↗
13. Yashima Y · Nisshin Steel Technol. Rep. · 1986 · 51 · 1
14. 10.1179/095066009X1257253017062410.1179/095066009X12572530170624 ↗
15. 10.1179/02670839910150584210.1179/026708399101505842 ↗
16. 10.1179/mst.1991.7.7.61310.1179/mst.1991.7.7.613 ↗
17. 10.1179/02670830322500940910.1179/026708303225009409 ↗
18. Melford DA: in ‘Residual, additives and material properties’, (ed. Kelly A et al.), 89–103; 1980, London, The Royal Society.
19. 10.2355/isijinternational1966.24.5410.2355/isijinternational1966.24.54 ↗
20. ‘Refining limits of impurities in Steel and progress in steelmaking artc’, 3–25, 143rd and 144th Nishiyama Memorial Lecture on ‘recent progress in steelmaking technology for high purity steel’, Tokyo and Osaka, Japan, May, 1992, Iron and Steel Institute of Japan.
21. Fruehan R J (ed.): ‘The making, shaping and treating of steel’, 11th edn; 1988, Pittsburgh, PA, The AISE Steel Foundation.
22. 10.1007/s11661-001-0125-710.1007/s11661-001-0125-7 ↗
23. Morrison WB: ‘Overview of Microalloying in Steel’, Proc.Vanitec Symp. Guilin, China, 2000, The Vanadium International TechnicalCommittee, Vanitec Limited, Westerham Kent, England, 25–35.