journal article·2006-03

Microstructural characterisation and corrosion behaviour of laser cladded Al–12Si alloy onto magnesium AS41/carbon fibre composite

A. Bakkar, R. Galun, V. Neubert

Materials Science and Technology· Volume 22· Issue 3
Publisher page

Abstract

The quality and properties of laser clad layers are dependent on the microstructure and properties of the interfaces with the substrate. The present paper reports, in details, on the characterisation of microstructure of the coating and interfacial layers evolved as a result of the CO2 laser remelting of previously plasma sprayed Al–12Si alloy onto C short fibres reinforced AS41–Mg composite. Scanning electron microscopy (SEM), wavelength dispersive X-ray (WDX) analysis and X-ray diffraction (XRD) were employed to identify the phases arising in the interfacial layers. The latter are composed mainly of Mg17Al12 and Mg2Si phases. XRD was conducted on the clad layers at different distances from the interface. At the same layers, the potentiodynamic polarisation in sodium chloride solution was measured and it was found that as the Mg content increases in the clad coating, the corrosion resistance decreases. However, the corrosion current of the clad coating is around two orders of magnitude lower than that of the C/Mg composite.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. 10.1007/BF0283414010.1007/BF02834140 ↗
2. Fritze C., Berek H., Kainer K. U., Mielke S., and Wielage B.: Proc. Conf. on ‘Magnesium alloys and their applications’, (ed.Mordike B. L., and Kainer K. U.), 635–640; 1998, Wolfsburg, MATINFO.
3. Nakatsugawa I.: Proc. Conf. ‘International Magnesium Association - IMA 53’, Yamaguchi, Japan, 1996,24–29.
4. 10.1007/BF0057677110.1007/BF00576771 ↗
5. 10.1007/BF0057005010.1007/BF00570050 ↗
6. Galun R., Weisheit A., and Mordike B. L.: Proc. Conf. on ‘Magnesium alloys and their applications’, (ed.Mordike B. L., and Kainer K. U.), 439–444; 1998, Wolfsburg, MATINFO.
7. 10.1080/089815002100005451110.1080/0898150021000054511 ↗
8. 10.1016/S1359-6462(98)00416-310.1016/S1359-6462(98)00416-3 ↗
9. 10.1023/A:101796611132410.1023/A:1017966111324 ↗
10. 10.1016/S0266-3538(01)00054-910.1016/S0266-3538(01)00054-9 ↗
11. 10.1016/S0167-577X(00)00230-510.1016/S0167-577X(00)00230-5 ↗
12. Bakkar A. · Lasers Eng · 2005 · 15 · 63
13. 10.1016/0010-938X(88)90090-X10.1016/0010-938X(88)90090-X ↗
14. 10.1002/sia.109410.1002/sia.1094 ↗
15. 10.1016/0036-9748(87)90164-510.1016/0036-9748(87)90164-5 ↗
16. 10.1016/0143-8166(88)90004-810.1016/0143-8166(88)90004-8 ↗
17. Kammer C. ‘Magnesium taschenbuch’, 172; 2000, Düsseldorf, Aluminium-Verlag.
18. Chakraborti N., Lukas H. L., Bodak O., and Rokhlin L.: in ‘Ternary alloys’, (ed.Effenberg G. et al), Vol. 16, 382–398; 1999, Stuttgart, MSI.
19. 10.5006/1.358303110.5006/1.3583031 ↗
20. Bakkar A., and Neubert V. ‘Corrosion behaviour of carbon fibres/ magnesium metal matrix composite and electrochemical response of its constituents’, to be published.