journal article·2017-07

Microstructure and mechanical properties of Cr12MoV by ultrasonic vibration-assisted laser surface melting

Jianzhong Zhou, Jiale Xu, Shu Huang, Zengrong Hu, Xiankai Meng, Yujie Fan

Materials Science and Technology· Volume 33· Issue 10
Publisher page

Abstract

The effects of laser surface melting assisted by ultrasonic vibration on the microstructure and mechanical properties of Cr12MoV were investigated. Results indicated that the original coarse columnar dendrite can be converted into a fine dendritic and equiaxed. The average microhardness increase from 389HV 0.2 to 427HV 0.2 resulted from the effect of grain refinement. The friction coefficient was lower than the melted layer without ultrasonic vibration and substrate. Under the same experimental conditions, the width and depth of wear scar were decreased by 19% and 25% than that of without ultrasonic vibration, respectively. The wear mechanism from severe adhesive wear into slight abrasive wear under the action of ultrasonic vibration. Experimental results revealed that melted layer fabricated by ultrasonic vibration exhibit finer and more uniform microstructure as well as superior tribological properties.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · High-Temperature Coating Behaviors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Mechanical Engineering, Jiangsu University, Zhenjiang, China

School of Urban Rail Transportation, Soochow University, Suzhou, China

School of Mechanical Engineering, Jiangsu University of Science and Technology, Zhenjiang, China

Funding

Colleges and Universities in Jiangsu Province

References (28)

Show source-provided references
1. 10.1016/j.ijfatigue.2015.06.02410.1016/j.ijfatigue.2015.06.024 ↗
2. 10.1016/j.surfcoat.2016.02.03310.1016/j.surfcoat.2016.02.033 ↗
3. 10.1179/1743284714Y.000000069510.1179/1743284714Y.0000000695 ↗
4. 10.1179/1743284714Y.000000071210.1179/1743284714Y.0000000712 ↗
5. 10.1179/174328409X41897310.1179/174328409X418973 ↗
6. 10.1179/1743284713Y.000000039610.1179/1743284713Y.0000000396 ↗
7. 10.1179/02670830110150947610.1179/026708301101509476 ↗
8. 10.1179/1743284711Y.000000008410.1179/1743284711Y.0000000084 ↗
9. 10.1179/1743284712Y.000000010510.1179/1743284712Y.0000000105 ↗
10. 10.1016/j.surfcoat.2009.08.01210.1016/j.surfcoat.2009.08.012 ↗
11. 10.1016/j.matlet.2015.07.05910.1016/j.matlet.2015.07.059 ↗
12. 10.1016/j.apsusc.2015.03.06710.1016/j.apsusc.2015.03.067 ↗
13. 10.1016/S0167-577X(01)00395-010.1016/S0167-577X(01)00395-0 ↗
14. 10.1016/j.ijfatigue.2015.04.00510.1016/j.ijfatigue.2015.04.005 ↗
15. 10.1179/1743284714Y.000000070310.1179/1743284714Y.0000000703 ↗
16. Chen J · Laser Technol · 2009 · 33 · 121
17. 10.1016/j.phpro.2011.03.00810.1016/j.phpro.2011.03.008 ↗
18. 10.1016/j.ijleo.2016.01.19410.1016/j.ijleo.2016.01.194 ↗
19. Li MY · Trans Mater Heat Treat · 2015 · 36 · 199
20. 10.1016/j.matlet.2014.11.05810.1016/j.matlet.2014.11.058 ↗
21. 10.1179/1743284715Y.000000009310.1179/1743284715Y.0000000093 ↗
22. 10.1016/j.optlastec.2010.11.00610.1016/j.optlastec.2010.11.006 ↗
23. 10.1179/1743284714Y.000000054710.1179/1743284714Y.0000000547 ↗
24. 10.1016/j.matdes.2006.04.02510.1016/j.matdes.2006.04.025 ↗
25. 10.1016/j.jallcom.2014.10.03010.1016/j.jallcom.2014.10.030 ↗
26. 10.1016/j.triboint.2015.07.03810.1016/j.triboint.2015.07.038 ↗
27. 10.1016/j.apsusc.2015.07.13810.1016/j.apsusc.2015.07.138 ↗
28. 10.1016/j.ijrmhm.2016.03.00410.1016/j.ijrmhm.2016.03.004 ↗