journal article·2012-05

Effect of solution heat treatments on superalloys Part 1 – alloy 718

J Andersson, G P Sjöberg, L Viskari, M C Chaturvedi

Materials Science and Technology· Volume 28· Issue 5
Publisher page

Abstract

The hot ductility as measured by Gleeble testing of Alloy 718 at four different solution heat treatments (954°C/15 h, 954°C/1 h, 982°C/1 h and 1050°C/3 h+954°C/1 h) has been investigated. It is concluded that constitutional liquation of NbC assisted by δ phase takes place and deteriorates the ductility. Parameters established by analysing the ductility dependence on temperature indicate a reduced weldability of the material in the coarse grain size state (ASTM 3) while indicating an increased weldability when containing a large amount of δ phase due to a grain boundary pinning effect. The accumulation of trace elements during grain growth at the highest temperature is believed to be the cause for the observed reduced on-cooling ductility.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: High Temperature Alloys and Creep · Intermetallics and Advanced Alloy Properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Materials Technology at Volvo Aero Corporation, 46181 Trollhättan, and Chalmers University of Technology, 41296 Gothenburg, Sweden

Department of Microscopy and Microanalysis at Chalmers University of Technology, 41296 Gothenburg, Sweden

Department of Mechanical and Industrial Engineering, University of Manitoba, Winnipeg, Manitoba, R3T 5V6 Canada

References (17)

Show source-provided references
1. 10.1016/0001-6160(85)90231-710.1016/0001-6160(85)90231-7 ↗
2. Sjöberg G, Andersson J, Sjunnesson A: ‘New materials in the design and manufacturing of hot structures for aircraft engines – Allvac 718Plus’, Proc. 19th Int. Symp. on ‘Air breathing engines’, Montreal, Canada, September 2009, International Association of Airbreathing Engines, Paper 1286.
3. 10.1016/S0167-577X(96)00266-210.1016/S0167-577X(96)00266-2 ↗
4. 10.1007/s11661-002-0033-510.1007/s11661-002-0033-5 ↗
5. Benhadad S, Richards NL, Prasad U, Guo H, Chaturvedi MC:in ‘Superalloys 2000’(, Pollock T M, et al.), 703–711; 2000, Warrendale, PA, TMS.10.7449/2000/Superalloys_2000_703_711 ↗
6. Lundin CD: ‘Historical development of the high speed time–temperature controller for welding research, The Gleeble’, Proc. 7th Annu.ISPS Conf., Tskukuba, Japan, Dynamic Systems International and International Symposium on Physical Simulation, January 1997, 283–289.
7. Lippold JC, Kiser SD, DuPont JN: ’Welding metallurgy and weldability of nickel-base superalloys’; 2009, Hoboken, NJ, John Wiley and Sons.
8. Lundin CD · Weld. J. · 1993 · 189
9. 10.1179/13621719910153776110.1179/136217199101537761 ↗
10. 10.1023/A:100651443191510.1023/A:1006514431915 ↗
11. 10.7449/1997/Superalloys_1997_731_74110.7449/1997/Superalloys_1997_731_741 ↗
12. 10.1080/0950083090329234610.1080/09500830903292346 ↗
13. Qiang L: ‘HAZ microstructural evolution in Alloy 718 after multiple repair and PWHT cycles’, PhD thesis, The Ohio State University, Columbus, OH, USA, 1999.
14. Qian M: ‘An Investigation of The Repair Weldability of Waspaloy and Alloy 718’, PhD thesis, The Ohio State University, Columbus, USA, 2002.
15. 10.1007/BF0265899910.1007/BF02658999 ↗
16. 10.1007/978-3-642-16864-2_2110.1007/978-3-642-16864-2_21 ↗
17. 10.1007/BF0264851710.1007/BF02648517 ↗