journal article·2012-08

Prediction of cutting forces and surface roughness using artificial neural network (ANN) and support vector regression (SVR) in turning 4140 steel

İ Asilturk, H Kahramanli, H El Mounayri

Materials Science and Technology· Volume 28· Issue 8
Publisher page

Abstract

In the present study, the prediction of cutting forces and surface roughness was carried out using neural networks and support vector regression (SVR) with six inputs, namely, three axis vibrations of the tool holder and cutting speed, feedrate and depth of cut. The data obtained by experimentation are used to construct predictive models. A feedforward backpropagation neural network and SVR have been selected for modelling. The coefficient of determination ( R2), mean absolute prediction error and root mean square error were calculated for each method, and these values served as a measure of prediction precision. We carried out comparison of the prediction accuracy of artificial neural networks and SVR. Comparison of the two models indicates that both models have successful performance. Experimental results are provided to confirm the effectiveness of this approach.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced machining processes and optimization · Advanced Machining and Optimization Techniques · Surface Roughness and Optical Measurements

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Selçuk University, Technology Faculty, Konya 42075, TURKEY

Purdue School of Engineering and Technology, IUPUI, 723 W. Michigan Street, Indianapolis, 46202, IN, USA

References (21)

Show source-provided references
1. Kassab SY: Proc. Int. Conf. on ‘Modeling and simulation estimation of cutting force in turning operation from measurement of motor current’, Konya, Turkey, August 2006, Selcuk University, Paper 113.
2. Fnides B · Mechanika · 2008 · 2 · 70
3. 10.1016/j.jmatprotec.2006.07.03710.1016/j.jmatprotec.2006.07.037 ↗
4. 10.1007/BF0117927610.1007/BF01179276 ↗
5. 10.1243/09544054JEM103510.1243/09544054JEM1035 ↗
6. 10.1179/02670830110150902510.1179/026708301101509025 ↗
7. 10.1179/174328407X23656210.1179/174328407X236562 ↗
8. 10.1016/S0957-4158(02)00096-X10.1016/S0957-4158(02)00096-X ↗
9. Gupta AK · Int. J. Manuf. Technol. Manage. · 2010 · 48 · 763
10. Kosilova AG: ‘Manufacturing handbook’, Vol. 2, 347–356; 1985, Moscow, Mashinostroene.
11. 10.1016/S0924-0136(99)00183-110.1016/S0924-0136(99)00183-1 ↗
12. Kumanan S · J. Inst. Eng. (India) · 2006 · 11
13. Stephenson DA, Agapiou JS: ‘Metal cutting theory and practice’, 2nd edn; 2005, New York, CRC Press.
14. Nalbant M · Model. Simul. Mater. Sci. Eng. · 2007 · 2 · 14
15. Sahin Y · Int. J. Refract. Met. Hard Mater · 2002 · 26 · 8410.1016/j.ijrmhm.2007.02.005 ↗
16. Liou CY, Kuo CT: ‘Data flow design for the backpropagation algorithm’, Proc. Int. Computer Symp., Taipei, Taiwan, Selcuk University, December 2002, 1–5.
17. 10.1016/j.ijmecsci.2009.09.00310.1016/j.ijmecsci.2009.09.003 ↗
18. 10.1080/1556703080209281710.1080/15567030802092817 ↗
19. 10.1080/1042691090349685410.1080/10426910903496854 ↗
20. 10.1016/j.fss.2008.11.02210.1016/j.fss.2008.11.022 ↗
21. Basak D · Neural Inf. Process. Lett. Rev. · 2007 · 11 · 203