Analysis of ferrite formed in 321 grade austenitic stainless steel
Source abstract
Abstract
A significant fraction of ferrite has been identified in a 321 grade austenitic stainless steel in the solution heat treated condition. The microstructures were analysed using electron backscatter diffraction, energy dispersive X-ray spectroscopy and X-ray diffraction (XRD) and the stability of the ferrite investigated using heat treatments in a tube furnace, dilatometry and high temperature XRD. The ferrite dissolved ∼800°C, then formed again on cooling at temperatures under 200°C. Thermodynamic predictions showed a significant ferrite content at room temperature under equilibrium conditions, and the DeLong diagrams predict an austenite+martensite microstructure in the cast condition. Sensitivity analysis on the DeLong diagram has shown that the nitrogen content had a large effect on the austenite stability. The instability of the austenite and the subsequent transformation to ferrite on cooling can be attributed to low nitrogen content measured in the as received material. It was found that thermal aging of the material caused further transformation of austenite to ferrite as well as the formation of sigma phase that appears higher in nitrogen than the matrix phases. The diffusion of nitrogen into sigma phase may cause instability of the austenite, which could cause further transformation of austenite to ferrite on cooling from the aging temperature. The transformation of austenite to ferrite is known to be accompanied by an increase in volume, which may be of relevance to components made with tight dimensional tolerances.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Materials Loughborough University, Loughborough LE11 3TU, UK
EDF Energy Barnett Way, Barnwood, Gloucester GL4 3RS, UK
Natural History Museum Cromwell Road, London SW7 5BD, UK
References (16)
Show source-provided references
1. 10.1016/0013-7944(88)90058-610.1016/0013-7944(88)90058-6 ↗
2. 10.1007/BF0316182710.1007/BF03161827 ↗
3. Developed by Subcommittee: A01.10. Standard Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes. ASTM 249/A249M-10a, ASTM, West Conshohocken, PA, USA. 2010.
4. 10.1016/j.msea.2006.04.07710.1016/j.msea.2006.04.077 ↗
5. 10.1007/s11665-011-0080-410.1007/s11665-011-0080-4 ↗
6. C Fiedler H · Trans. Am. Soc. Met. · 1954 · 47 · 267
7. 10.1179/026708310X1266841553400810.1179/026708310X12668415534008 ↗
8. 10.1016/0001-6160(62)90101-310.1016/0001-6160(62)90101-3 ↗
9. Lee JH · Jpn Inst. Met. · 2009 · 50 · 473
10. Green G · Mater. Sci. Technol.
11. 10.1016/0001-6160(72)90137-X10.1016/0001-6160(72)90137-X ↗
12. 10.1007/s11661-005-0257-210.1007/s11661-005-0257-2 ↗
13. Schaeffler AL · Met. Prog. · 1949 · 56 · 680
14. Delong WT · Met. Prog. · 1960 · 77 · 98
15. 10.1007/BF0322099110.1007/BF03220991 ↗
16. Developed by Subcommittee: A01.10. Standard Specification for Welded, Unannealed Austenitic Stainless Steel Tubular Products. ASTM A778-01(2009)e1, ASTM, West Conshohocken, PA, USA. 2009.