journal article·2006-04

Deformation effects in shocked metals and alloys

E. V. Esquivel, L. E. Murr

Materials Science and Technology· Volume 22· Issue 4
Publisher page

Abstract

Plane wave shock loading produces twins or twin faults in many metals and alloys, and, especially for fcc materials with decreasing stacking fault energy (SFE), a critical twinning pressure (CTP), and crystallographic orientations which control the onset and extent of twinning. The CTP increases with increasing SFE, and is lowest in [001] orientations for fcc. The deformation associated with plane shock is generally within the realm of the plastic regime of the stress–strain diagram. Correspondingly, spherical shock, characteristic of impact cratering, produces large strains through solid state flow and sliding of overlapping shear bands composed of dynamically recrystallised grains, and is therefore only partly encompassed in the realm of the stress–strain diagram. Below this zone for impact craters, and similar to plane shock loading, there is a slip–twinning or slip–microbanding transition in fcc materials, which depends on the SFE; twinning persists for low SFE while microbands dominate in high SFE fcc materials such as nickel or copper. A simple model is used to explain differences in residual microstructures in plane shock loading and spherical shock or impact cratering as they relate to SFE and shock wave geometry. Simple schematics are used to explain the connection between plane shock and spherical shock loading in relation to the stress–strain diagram as a paradigm.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: High-Velocity Impact and Material Behavior · High-pressure geophysics and materials · Energetic Materials and Combustion

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. Meyers M. A., and Murr L. E. (ed.): ‘Shock waves and high-strain-rate phenomena in metals: concepts and applications’; 1981, New York, Plenum Press.10.1007/978-1-4613-3219-0 ↗
2. 10.1002/978047017227810.1002/9780470172278 ↗
3. Murr L. E.: in ‘Shock waves and high-strain-rate phenomena in metals: concepts and applications’, (ed.Meyers M. A., and Murr L. E.), Chap. 37, 607-673; 1981, New York, Plenum Press.10.1007/978-1-4613-3219-0_37 ↗
4. 10.1016/S0734-743X(01)00096-310.1016/S0734-743X(01)00096-3 ↗
5. 10.1016/S0734-743X(01)00085-910.1016/S0734-743X(01)00085-9 ↗
6. 10.1023/B:JMSC.0000043597.72588.d110.1023/B:JMSC.0000043597.72588.d1 ↗
7. Armstrong R. W., and Worthington P. J.: in ‘Metallurgical effects at high strain rates’, (ed.Rohde R. W.), 401; 1973, New York, Plenum Press.10.1007/978-1-4615-8696-8_22 ↗
8. 10.1016/S1359-6454(96)00145-010.1016/S1359-6454(96)00145-0 ↗
9. Murr L. E. · J. Mater. Set · 2004 · 39
10. 10.1023/A:102379661908610.1023/A:1023796619086 ↗
11. Murr L. E. ‘Interfacial phenomena in metals and alloys’; 1975, Reading, MA, Addison-Wesley Publishing (reprinted 1991, avail-able from CBLS, 119 Brentwood St, Marietta, OH 45750, USA).
12. Murr L. E.: in ‘Shocked waves in condensed matter’, (ed. Schmidt S. C., and Holmes N. C.), 315; 1988, Amsterdam, Elsevier Science.
13. Murr L. E. · Trans. AIME · 1969 · 245 · 2229
14. 10.1007/BF0232656310.1007/BF02326563 ↗
15. 10.1007/PL0002025610.1007/PL00020256 ↗
16. Staudhammer K. P., Frantz C. E., Hecker S. S., and Murr L. E.: in ‘Shock wave and high-strain-rate phenomena in metals’, (ed.Meyers M. A., and Murr L. E.), Chap. 7, 91-112; 1981, New York, Plenum Press.10.1007/978-1-4613-3219-0_7 ↗
17. 10.1007/BF0264442810.1007/BF02644428 ↗
18. 10.1016/0001-6160(83)90103-710.1016/0001-6160(83)90103-7 ↗
19. Murr L. E. · Res. Meek · 1982 · 4 · 237
20. 10.1002/(SICI)1521-396X(199804)166:2<763::AID-PSSA763>3.0.CO;2-910.1002/(SICI)1521-396X(199804)166:2<763::AID-PSSA763>3.0.CO;2-9 ↗
21. 10.1016/0001-6160(89)90206-X10.1016/0001-6160(89)90206-X ↗
22. 10.1016/S1359-6454(97)00018-910.1016/S1359-6454(97)00018-9 ↗
23. Kennedy C., and Murr L. E.: Mater. Set Eng. A, 2002, A325,131–142.10.1016/S0921-5093(01)01449-6 ↗
24. Murr L. E., Niou C.S., Garcia E. P., Ferreyra E., Rivas J. M., and Sanchez J. C.: Mater. Set Eng A., 1997, A222,118–127.10.1016/S0921-5093(96)10518-9 ↗
25. 10.1016/S1044-5803(96)00173-810.1016/S1044-5803(96)00173-8 ↗
26. 10.1023/A:101654102350210.1023/A:1016541023502 ↗