Joining of Cf/SiC composite to Ti alloy using composite filler materials
Source abstract
Abstract
Cf/SiC was successfully joined to Ti alloy with Ag–Cu–Ti–W, Ag–Cu–Ti–SiC and Ag–Cu–Ti–TiC mixed powders by some suitable brazing parameters. Microstructure and shear strengths of the preformed joint were investigated. The results showed that the W particulate and reaction products can uniformly distribute in the brazing layer of the performed joint. These composite brazing layers relaxed the thermal stress of the joint effectively. These characteristics were beneficial to the joint, which had shear strengths that were significantly higher than the optimal shear strengths of the joint brazed with pure Ag–Cu–Ti at room temperature and 500°C.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Advanced Welding Techniques Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Materials Science and EngineeringUniversity of Science and Technology Beijing, Beijing 100083, China;, Email: xiongjinhui@126.com
School of Materials Science and EngineeringUniversity of Science and Technology Beijing, Beijing 100083, China
References (5)
Show source-provided references
1. lshikawa T. · Science · 1998 · 282
2. 10.1080/10667857.1999.1175281410.1080/10667857.1999.11752814 ↗
3. Yang J. G. · Mater. Sci. Technol · 2001 · 9 · 676
4. Yang J. · Tsinghua Sci. Technol · 2004 · 9 · 601
5. Zhu M. G. · J. Mater. Sc