journal article·2017-09

Hot ductility of high Al TWIP steels containing Nb and Nb-V

A. Qaban, B. Mintz, S. E. Kang, S. Naher

Materials Science and Technology· Volume 33· Issue 14
Publisher page

Abstract

The hot ductility of B-Ti-Nb-high Al (1.5%Al) containing TWIP steels having Ti/N ratios mainly in excess of 3.4/1 was obtained. After soaking at 1250°C, the tensile specimens were cooled at 12 or 60°C min −1 to the test temperature and then strained to failure at 3 × 10 −3 s −1 . Ductility was always good (reduction of area >40%), independent of Ti/N ratio or cooling rate. The good ductility is due to B segregation strengthening the grain boundaries and the low S level (0.005%S) limiting the volume fraction of MnS inclusions and restricting AlN precipitation to the matrix. Increasing the cooling rate, higher N levels and Nb resulted in a small improvement in ductility. An addition of V to the Nb-containing steels caused a slight deterioration in the hot ductility.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical Engineering and Aeronautics, City, University of London, London, UK

Gwangyang Process Research Group, POSCO Technical Research Laboratory, POSCO, Pohang, South Korea

References (33)

Show source-provided references
1. 10.5772/1408610.5772/14086 ↗
2. Kim SK, Cho JW, Kwak WJ, Development of TWIP steel for automotive applications. Proc. 3rd Int. Conf. on New Developments in Metallurgical Process Technologies; 2007 June; Dusseldorf, Germany: TEMA Marketing AG, Steel Institute VDEH; p. 690–697.
3. 10.1179/026708309X1250693387338710.1179/026708309X12506933873387 ↗
4. 10.1179/026708309X1259571230591510.1179/026708309X12595712305915 ↗
5. 10.1179/1743284711Y.000000010910.1179/1743284711Y.0000000109 ↗
6. 10.1179/1743284713Y.000000039910.1179/1743284713Y.0000000399 ↗
7. 10.1179/1743284714Y.000000057610.1179/1743284714Y.0000000576 ↗
8. 10.1179/1743284713Y.000000025910.1179/1743284713Y.0000000259 ↗
9. 10.1179/imr.1991.36.1.18710.1179/imr.1991.36.1.187 ↗
10. 10.1179/mst.1991.7.7.61310.1179/mst.1991.7.7.613 ↗
11. 10.2355/isijinternational.39.83310.2355/isijinternational.39.833 ↗
12. Precipitation behaviour of complex B compounds in steel. Tokyo, Japan: Nippon Steel; 1983. (Nippon Steel technical report no. 21). p. 331–337.
13. 10.1179/095066009X1257253017062410.1179/095066009X12572530170624 ↗
14. 10.1179/1743284711Y.000000009410.1179/1743284711Y.0000000094 ↗
15. 10.2355/isijinternational1966.22.18110.2355/isijinternational1966.22.181 ↗
16. 10.1179/03071697980327647110.1179/030716979803276471 ↗
17. 10.4028/www.scientific.net/MSF.284-286.46110.4028/www.scientific.net/MSF.284-286.461 ↗
18. 10.1179/02670830110150966510.1179/026708301101509665 ↗
19. 10.1179/imr.1988.33.1.22110.1179/imr.1988.33.1.221 ↗
20. Turkdogan ET · Proc AIME Steelmak Conf · 1987 · 70 · 399
21. Subramanian SV, Shima S, Ocampo G, HSLA steels 85, Chinese Society of Metals, Materials Park, Ohio; 1985. p. 151.
22. Kirkwood PI · Proc. Int. Symp. on Welding Metallurgy of Structural Steels · 1987 · 21
23. Thermfact and GTT-technologies, Thermomechamical software and database package [cited 1 Apr 2017]. Available from: www.factsage.com.
24. Mesquita RA, Totten GE. Failure analysis of heat treated steel components; 2008; p. 43–87.10.31399/asm.tb.fahtsc.t51130311 ↗
25. 10.1007/s11663-016-0626-910.1007/s11663-016-0626-9 ↗
26. 10.1179/mst.1997.13.3.24310.1179/mst.1997.13.3.243 ↗
27. 10.1179/02670839910150678810.1179/026708399101506788 ↗
28. 10.1007/BF0266751810.1007/BF02667518 ↗
29. Leslie WC · Trans ASM · 1954 · 46 · 1470
30. Turkdogan E · J Iron Steel Inst · 1955 · 180 · 349
31. 10.1179/mst.1985.1.7.52010.1179/mst.1985.1.7.520 ↗
32. 10.1016/S1359-6462(96)00484-810.1016/S1359-6462(96)00484-8 ↗
33. 10.1007/BF0264301710.1007/BF02643017 ↗