Influence of B on hot ductility of high Al, TWIP steels
Source abstract
Abstract
The influence of B on the hot ductility of high Al, Ti containing twinning induced plasticity (TWIP) steels has been examined. It was established that provided the B was fully protected by adding sufficient Ti to combine with all the N, then B could segregate to the austenite grain boundaries and improve ductility. This improvement was particularly marked for the temperature range of 700–900°C, the range in which the straightening operation often takes place in continuous casting. Of most importance in the present work has been the detection of B at the boundaries using a secondary ion mass spectrometry technique. The cooling rate from the reheating temperature of 1250°C to the tensile testing temperature range of 700–1200°C was 60 K min−1, but it is likely that slower cooling rates ≤25 K min−1, more in keeping with the secondary cooling rate on continuous casting, will give even better ductility. Ti additions in themselves are beneficial to the hot ductility of these steels as precipitation of AlN at the austenite boundaries is avoided, but only if the cooling rate is sufficiently slow to allow the TiN particles to coarsen. However, to ensure freedom from cracking, an addition of B is also required.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
POSCO Technical Research Labs, Pohang, Korea
City University London, London, UK
Industrial Metals and Minerals, University of Pretoria, Pretoria, South Africa
References (22)
Show source-provided references
1. Kim S. K., Cho J. W., Kwak W. J., and Kim G. ‘Development of TWIP steel for automotive applications’, Proc. 3rd Int. Conf. on ‘New developments in metallurgical process technologies’ Dusseldorf, Germany, June 2007, TEMA Marketing AG, Steel Inst. VDEH, 690–697.
2. 10.1007/s40195-012-0501-x10.1007/s40195-012-0501-x ↗
3. 10.1179/095066009X1257253017062410.1179/095066009X12572530170624 ↗
4. Banks K. M., Bentley A. P., and Koursaris A., Proc. 42nd MWSP Conf., Toronto, Ont., Canada, 2000, ISS, Vol. 38, 329–340.
5. 10.1179/026708309X1250693387338710.1179/026708309X12506933873387 ↗
6. 10.1179/026708309X1259571230591510.1179/026708309X12595712305915 ↗
7. 10.1179/1743284711Y.000000010910.1179/1743284711Y.0000000109 ↗
8. Perrot-Simonetta M. T. · J. Phys. · 1995 · 5 · C7
9. 10.1016/j.msea.2008.04.02610.1016/j.msea.2008.04.026 ↗
10. 10.2355/tetsutohagane1955.73.1_11510.2355/tetsutohagane1955.73.1_115 ↗
11. 10.1179/02670830010150769510.1179/026708300101507695 ↗
12. 10.1179/1743284713Y.000000025910.1179/1743284713Y.0000000259 ↗
13. 10.1179/imr.1988.33.1.22110.1179/imr.1988.33.1.221 ↗
14. 10.1179/mst.1991.7.7.61310.1179/mst.1991.7.7.613 ↗
15. 10.1179/02670839910150584210.1179/026708399101505842 ↗
16. 10.1179/02670839910150678810.1179/026708399101506788 ↗
17. 10.1179/026708309X1252662033827810.1179/026708309X12526620338278 ↗
18. 10.1016/0001-6160(88)90023-510.1016/0001-6160(88)90023-5 ↗
19. Cameron T. B., and Moral J. E., in ‘B in steel’, Proc. Int. Symp. Boron steels (ed. S. K. Banerjii and J. E. Moral), 61; 1980, New York, Metall. Soc. AIME.
20. Maitrepierre Ph., Rofes-Vernis J., and Thivellier D., Proc. Int. Symp. on ‘Boron steels’, (ed. Banerjii S. K., and Moral J. E.), 1; 1980, New York, Metall. Soc. AIME.
21. Ohmori Y., and Yamanaki K., Proc. Int. Symp. on ‘Boron steels’, (ed. Banerjii S. K., and Moral J. E.), 44; 1980, New York, Metall. Soc. AIME.
22. 10.1007/BF0266751810.1007/BF02667518 ↗